[U-Boot-Users] Tqm850 + u-boot-1.1.6 + 2.6 kernel
Without success I tried to use Kernel 2.6.18 on a tqm850. The kernel compiles cleanly to uImage, Uboot loads the image, but then there is no Output at console and after some seconds the board reboots. Are there any known bugs in the kernel which have to be patched, Any special configurations for tqm , any 2.6 kernel versions proved to work in tqm ? Best regards
Peter
In message 00A72535833B444D9C91F09C3BAF2C2E87D1EE@nets13ka.ww300.siemens.net you wrote:
Without success I tried to use Kernel 2.6.18 on a tqm850.
We don;t support 2.6 for TQM8xx yet.
But this is actually pretty off topic here.
------_=_NextPart_001_01C70FD2.92C38E25 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
And please don't post HTML on this list!
Best regards,
Wolfgang Denk
participants (2)
-
Grubmair, Peter -
Wolfgang Denk