Hi All,

I working on Uboot for the MPC8548, and I using your git repo

-I built the Uboot with* ppc_85xx- *toolchain, -The Entry Point Address of elf file is *0xfffa0000*, - My Memory map is ;

0x0000_0000 | 256MB | 0x0FFF_FFFF | DDR SDRAM 0x5000_0000 | 64MB | 0x53FF_FFFF | PCI 1 Prefetchable Memory 0x5400_0000 | 64MB | 0x57FF_FFFF | PCI 1 Non-Prefetchable Memory 0x5800_0000 | 64MB | 0x5BFF_FFFF | PCI 1 IO 0x6000_0000 | 64MB | 0x63FF_FFFF | PCI Express Prefetchable Memory 0x6400_0000 | 64MB | 0x67FF_FFFF | PCI Express Non-Prefetchable Memory 0x6800_0000 | 64MB | 0x6BFF_FFFF | PCI Express IO 0xF8B0_0000 | 16MB | 0xF7FF_FFFF | NVRAM/CADMUS 0xF000_0000 | 64MB | 0xFBFF_FFFF | LBC SDRAM 0xE000_0000 | 1MB | 0xFE0F_FFFF | Configuration Control Registers 0xD000_0000 | 64MB | 0xD3FF_FFFF | SODIMM Flash 0xFF80_0000 | 8MB | 0xFFFF_FFFF | Boot Flash

After the install program to board, program stay at *0xfffff290* address, I did comparison with elf file, its *InstructionTLBError*.

How can I fix this, I need suggestions.

I look forward to your replies.

Your Sincerely.

Yigit YASAR