When a network connection is not available, U-Boot can be load files via the serial port.

The U-Boot commands for loading files over the UART all have the same options.

Is it possible implement two-way file transfer in xyzModem - use loady, loadb to send files from U-boot to target host?

So instead of using loady to load files,

# Loading with the y-modem protocol board> loady [load address] [baud rate]

we will use 'sendy'to send files:

# Sending with the y-modem protocol from U-boot to target host

sendy [offset address] [size] [baud rate] or maybe sendy /path/to/file/we/want/to/transfer [baud rate]

And on target host we use Minicom, TeraTerm or Hyper Terminal to receive files. How to modify xuzModem.c, cmd_load.c for sending files?

B.Regards, Alex