I am stumped, again.

When u-boot comes up, "ide part" shows:

DbAu1x00 # ide part

Partition Map for IDE device 0 -- Partition Type: DOS

Partition Start Sector Num Sectors Type 1 0 501760 f8

but fdisk in Linux shows:

Command (m for help): p

Disk /dev/hdg: 16 heads, 32 sectors, 980 cylinders Units = cylinders of 512 * 512 bytes

Device Boot Start End Blocks Id System /dev/hdg1 1 9 2288 83 Linux /dev/hdg2 10 18 2304 83 Linux /dev/hdg3 19 980 246272 83 Linux

Something else must still be in the wrong endian mode, but I can't figure out what it is.

Ed Okerson