From: Ying Zhang b40530@freescale.com

Modify CONFIG_USB_MAX_CONTROLLER_COUNT value to 1 on P1022DS. As ETSEC2 and USB2 are muxed; thus if ETSEC2 is enabled, the system bus hangs on USB2 if ETSEC2 is enabled but "usb start" command is issued. Hence making default controller count to 1 to avoid system hang.

Signed-off-by: Nikhil Badola nikhil.badola@freescale.com Reviewed-by: Yusong Sun yorksun@freescale.com --- arch/powerpc/include/asm/config_mpc85xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 01b0905..d0e0021 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -201,7 +201,7 @@ #elif defined(CONFIG_P1013) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 2 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 @@ -285,7 +285,7 @@ #define CONFIG_SYS_PPC_E500_DEBUG_TLB 2 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111