From: Tang Yuantian B29983@freescale.com

Add the Silicon Image series PCI Express to Serial ATA controller support, including Sil3132, Sil3131 and Sil3124. The SATA controller can be used to load kernel.

The features list: - Supports 1-lane 2.5 Gbit/s PCI Express - Supports one/two/four independent Serial ATA channels - Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s - Supports LBA28 and LBA48

Signed-off-by: Tang Yuantian b29983@freescale.com Signed-off-by: Aaron Williams Aaron.Williams@cavium.com Tested-by: Lan Chunhe b25806@freescale.com --- git tree: git://git.denx.de/u-boot.git branch: master Test platform:P1022DS, P4080DS V2: - add virt_to_bus to translate address - fix some issues

drivers/block/Makefile | 1 + drivers/block/sata_sil.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/block/sata_sil.h | 227 +++++++++++++++ include/pci_ids.h | 5 + 4 files changed, 953 insertions(+), 0 deletions(-) create mode 100644 drivers/block/sata_sil.c create mode 100644 drivers/block/sata_sil.h

diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 2efe981..98560ef 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -36,6 +36,7 @@ COBJS-$(CONFIG_MX51_PATA) += mxc_ata.o COBJS-$(CONFIG_PATA_BFIN) += pata_bfin.o COBJS-$(CONFIG_SATA_DWC) += sata_dwc.o COBJS-$(CONFIG_SATA_SIL3114) += sata_sil3114.o +COBJS-$(CONFIG_SATA_SIL) += sata_sil.o COBJS-$(CONFIG_IDE_SIL680) += sil680.o COBJS-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o COBJS-$(CONFIG_SYSTEMACE) += systemace.o diff --git a/drivers/block/sata_sil.c b/drivers/block/sata_sil.c new file mode 100644 index 0000000..374a368 --- /dev/null +++ b/drivers/block/sata_sil.c @@ -0,0 +1,720 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Author: Tang Yuantian b29983@freescale.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <command.h> +#include <asm/byteorder.h> +#include <malloc.h> +#include <asm/io.h> +#include <fis.h> +#include <libata.h> +#include "sata_sil.h" + +/* Convert sectorsize to wordsize */ +#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2) +#define mdelay(n) udelay((n)*1000) +#define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v)) + +static struct sata_info sata_info; +extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE]; + +static struct pci_device_id supported[] = { + {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3131}, + {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3132}, + {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3124}, + {} +}; + +static void sil_sata_dump_fis(struct sata_fis_d2h *s) +{ + printf("Status FIS dump:\n"); + printf("fis_type: %02x\n", s->fis_type); + printf("pm_port_i: %02x\n", s->pm_port_i); + printf("status: %02x\n", s->status); + printf("error: %02x\n", s->error); + printf("lba_low: %02x\n", s->lba_low); + printf("lba_mid: %02x\n", s->lba_mid); + printf("lba_high: %02x\n", s->lba_high); + printf("device: %02x\n", s->device); + printf("lba_low_exp: %02x\n", s->lba_low_exp); + printf("lba_mid_exp: %02x\n", s->lba_mid_exp); + printf("lba_high_exp: %02x\n", s->lba_high_exp); + printf("res1: %02x\n", s->res1); + printf("sector_count: %02x\n", s->sector_count); + printf("sector_count_exp: %02x\n", s->sector_count_exp); +} + +static const char *sata_spd_string(unsigned int spd) +{ + static const char * const spd_str[] = { + "1.5 Gbps", + "3.0 Gbps", + "6.0 Gbps", + }; + + if (spd == 0 || (spd - 1) >= 3) + return "<unknown>"; + + return spd_str[spd - 1]; +} + +static u32 ata_wait_register(void __iomem *reg, u32 mask, + u32 val, int timeout_msec) +{ + u32 tmp; + + tmp = readl(reg); + while ((tmp & mask) == val && timeout_msec > 0) { + mdelay(1); + timeout_msec--; + tmp = readl(reg); + } + + return tmp; +} + +static void sil_config_port(void *port) +{ + /* configure IRQ WoC */ + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* zero error counters. */ + writew(0x8000, port + PORT_DECODE_ERR_THRESH); + writew(0x8000, port + PORT_CRC_ERR_THRESH); + writew(0x8000, port + PORT_HSHK_ERR_THRESH); + writew(0x0000, port + PORT_DECODE_ERR_CNT); + writew(0x0000, port + PORT_CRC_ERR_CNT); + writew(0x0000, port + PORT_HSHK_ERR_CNT); + + /* always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); + + /* clear port multiplier enable and resume bits */ + writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR); +} + +static int sil_init_port(void *port) +{ + u32 tmp; + + writel(PORT_CS_INIT, port + PORT_CTRL_STAT); + ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_INIT, PORT_CS_INIT, 100); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_RDY, 0, 100); + + if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) + return 1; + + return 0; +} + +static void sil_read_fis(int dev, int tag, struct sata_fis_d2h *fis) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + void __iomem *port = sata->port; + struct sil_prb *prb; + int i; + u32 *src, *dst; + + prb = port + PORT_LRAM + tag * PORT_LRAM_SLOT_SZ; + src = (u32 *)&prb->fis; + dst = (u32 *)fis; + for (i = 0; i < sizeof(struct sata_fis_h2d); i += 4) + *dst++ = readl(src++); +} + +static int sil_exec_cmd(int dev, struct sil_cmd_block *pcmd, int tag) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + void __iomem *port = sata->port; + u64 paddr = virt_to_bus(sata->devno, pcmd); + u32 irq_mask, irq_stat; + int rc; + + writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR); + + /* better to add momery barrior here */ + writel((u32)paddr, port + PORT_CMD_ACTIVATE + tag * 8); + writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + tag * 8 + 4); + + irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; + irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, + 0, 10000); + + /* clear IRQs */ + writel(irq_mask, port + PORT_IRQ_STAT); + irq_stat >>= PORT_IRQ_RAW_SHIFT; + + if (irq_stat & PORT_IRQ_COMPLETE) + rc = 0; + else { + /* force port into known state */ + sil_init_port(port); + if (irq_stat & PORT_IRQ_ERROR) + rc = 1; /* error */ + else + rc = 2; /* busy */ + } + + return rc; +} + +static int sil_cmd_set_feature(int dev) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sata_fis_d2h fis; + u8 udma_cap; + int ret; + + memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + pcmd->prb.fis.command = ATA_CMD_SET_FEATURES; + pcmd->prb.fis.features = SETFEATURES_XFER; + + /* First check the device capablity */ + udma_cap = (u8)(sata->udma & 0xff); + debug("udma_cap %02x\n", udma_cap); + + if (udma_cap == ATA_UDMA6) + pcmd->prb.fis.sector_count = XFER_UDMA_6; + if (udma_cap == ATA_UDMA5) + pcmd->prb.fis.sector_count = XFER_UDMA_5; + if (udma_cap == ATA_UDMA4) + pcmd->prb.fis.sector_count = XFER_UDMA_4; + if (udma_cap == ATA_UDMA3) + pcmd->prb.fis.sector_count = XFER_UDMA_3; + + ret = sil_exec_cmd(dev, pcmd, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("Err: exe cmd(0x%x).\n", + readl(sata->port + PORT_SERROR)); + sil_sata_dump_fis(&fis); + return 1; + } + + return 0; +} + +static int sil_cmd_identify_device(int dev, u16 *id) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sata_fis_d2h fis; + int ret; + + memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL); + pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + pcmd->prb.fis.command = ATA_CMD_ID_ATA; + pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, id)); + pcmd->sge.cnt = cpu_to_le32(sizeof(id[0]) * ATA_ID_WORDS); + pcmd->sge.flags = cpu_to_le32(SGE_TRM); + + ret = sil_exec_cmd(dev, pcmd, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("Err: id cmd(0x%x).\n", readl(sata->port + PORT_SERROR)); + sil_sata_dump_fis(&fis); + return 1; + } + ata_swap_buf_le16(id, ATA_ID_WORDS); + + return 0; +} + +static int sil_cmd_soft_reset(int dev) +{ + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + struct sata_fis_d2h fis; + void __iomem *port = sata->port; + int ret; + + /* put the port into known state */ + if (sil_init_port(port)) { + printf("SRST: port %d not ready\n", dev); + return 1; + } + + memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block)); + + pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_SRST); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = 0xf; + + ret = sil_exec_cmd(dev, &cmdb, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("SRST cmd error.\n"); + sil_sata_dump_fis(&fis); + return 1; + } + + return 0; +} + +static ulong sil_sata_rw_cmd(int dev, ulong start, ulong blkcnt, + u8 *buffer, int is_write) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sata_fis_d2h fis; + u64 block; + int ret; + + block = (u64)start; + memset(pcmd, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + if (is_write) { + pcmd->prb.fis.command = ATA_CMD_WRITE; + pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE); + } else { + pcmd->prb.fis.command = ATA_CMD_READ; + pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ); + } + + pcmd->prb.fis.device = ATA_LBA; + pcmd->prb.fis.device |= (block >> 24) & 0xf; + pcmd->prb.fis.lba_high = (block >> 16) & 0xff; + pcmd->prb.fis.lba_mid = (block >> 8) & 0xff; + pcmd->prb.fis.lba_low = block & 0xff; + pcmd->prb.fis.sector_count = (u8)blkcnt & 0xff; + + pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer)); + pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE); + pcmd->sge.flags = cpu_to_le32(SGE_TRM); + + ret = sil_exec_cmd(dev, pcmd, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("Err: rw cmd(0x%08x).\n", + readl(sata->port + PORT_SERROR)); + sil_sata_dump_fis(&fis); + return 1; + } + + return blkcnt; +} + +static ulong sil_sata_rw_cmd_ext(int dev, ulong start, ulong blkcnt, + u8 *buffer, int is_write) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sata_fis_d2h fis; + u64 block; + int ret; + + block = (u64)start; + memset(pcmd, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + if (is_write) { + pcmd->prb.fis.command = ATA_CMD_WRITE_EXT; + pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE); + } else { + pcmd->prb.fis.command = ATA_CMD_READ_EXT; + pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ); + } + + pcmd->prb.fis.lba_high_exp = (block >> 40) & 0xff; + pcmd->prb.fis.lba_mid_exp = (block >> 32) & 0xff; + pcmd->prb.fis.lba_low_exp = (block >> 24) & 0xff; + pcmd->prb.fis.lba_high = (block >> 16) & 0xff; + pcmd->prb.fis.lba_mid = (block >> 8) & 0xff; + pcmd->prb.fis.lba_low = block & 0xff; + pcmd->prb.fis.device = ATA_LBA; + pcmd->prb.fis.sector_count_exp = (blkcnt >> 8) & 0xff; + pcmd->prb.fis.sector_count = blkcnt & 0xff; + + pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer)); + pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE); + pcmd->sge.flags = cpu_to_le32(SGE_TRM); + + ret = sil_exec_cmd(dev, pcmd, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("Err: rw ext cmd(0x%08x).\n", + readl(sata->port + PORT_SERROR)); + sil_sata_dump_fis(&fis); + return 1; + } + + return blkcnt; +} + +ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt, + void *buffer, int is_write) +{ + ulong start, blks, max_blks; + u8 *addr; + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = ATA_MAX_SECTORS; + do { + if (blks > max_blks) { + sil_sata_rw_cmd(dev, start, max_blks, addr, is_write); + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + sil_sata_rw_cmd(dev, start, blks, addr, is_write); + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt, + void *buffer, int is_write) +{ + ulong start, blks, max_blks; + u8 *addr; + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = ATA_MAX_SECTORS_LBA48; + do { + if (blks > max_blks) { + sil_sata_rw_cmd_ext(dev, start, max_blks, + addr, is_write); + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + sil_sata_rw_cmd_ext(dev, start, blks, + addr, is_write); + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +void sil_sata_cmd_flush_cache(int dev) +{ + struct sil_cmd_block cmdb, *pcmd = &cmdb; + + memset((void *)pcmd, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + pcmd->prb.fis.command = ATA_CMD_FLUSH; + + sil_exec_cmd(dev, pcmd, 0); +} + +void sil_sata_cmd_flush_cache_ext(int dev) +{ + struct sil_cmd_block cmdb, *pcmd = &cmdb; + + memset((void *)pcmd, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + pcmd->prb.fis.command = ATA_CMD_FLUSH_EXT; + + sil_exec_cmd(dev, pcmd, 0); +} + +static void sil_sata_init_wcache(int dev, u16 *id) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + + if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id)) + sata->wcache = 1; + if (ata_id_has_flush(id)) + sata->flush = 1; + if (ata_id_has_flush_ext(id)) + sata->flush_ext = 1; +} + +static int sil_sata_get_wcache(int dev) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + return sata->wcache; +} + +static int sil_sata_get_flush(int dev) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + return sata->flush; +} + +static int sil_sata_get_flush_ext(int dev) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + return sata->flush_ext; +} + +/* + * SATA interface between low level driver and command layer + */ +ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + ulong rc; + + if (sata->lba48) + rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD); + else + rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD); + + return rc; +} + +/* + * SATA interface between low level driver and command layer + */ +ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) +{ + struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; + ulong rc; + + if (sata->lba48) { + rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD); + if (sil_sata_get_wcache(dev) && sil_sata_get_flush_ext(dev)) + sil_sata_cmd_flush_cache_ext(dev); + } else { + rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD); + if (sil_sata_get_wcache(dev) && sil_sata_get_flush(dev)) + sil_sata_cmd_flush_cache(dev); + } + + return rc; +} + +/* + * SATA interface between low level driver and command layer + */ +int init_sata(int dev) +{ + static int init_done, idx; + pci_dev_t devno; + u16 word; + + if (init_done == 1 && dev < sata_info.maxport) + return 1; + + init_done = 1; + + /* Find PCI device(s) */ + devno = pci_find_devices(supported, idx++); + if (devno == -1) + return 1; + + pci_read_config_word(devno, PCI_DEVICE_ID, &word); + + /* get the port count */ + word &= 0xf; + + sata_info.portbase = sata_info.maxport; + sata_info.maxport = sata_info.portbase + word; + sata_info.devno = devno; + + /* Read out all BARs */ + sata_info.iobase[0] = (ulong)pci_map_bar(devno, + PCI_BASE_ADDRESS_0, PCI_REGION_MEM); + sata_info.iobase[1] = (ulong)pci_map_bar(devno, + PCI_BASE_ADDRESS_2, PCI_REGION_MEM); + sata_info.iobase[2] = (ulong)pci_map_bar(devno, + PCI_BASE_ADDRESS_4, PCI_REGION_MEM); + + /* mask out the unused bits */ + sata_info.iobase[0] &= 0xffffff80; + sata_info.iobase[1] &= 0xfffffc00; + sata_info.iobase[2] &= 0xffffff80; + + /* Enable Bus Mastering and memory region */ + pci_write_config_word(devno, PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* Check if mem accesses and Bus Mastering are enabled. */ + pci_read_config_word(devno, PCI_COMMAND, &word); + if (!(word & PCI_COMMAND_MEMORY) || + (!(word & PCI_COMMAND_MASTER))) { + printf("Error: Can not enable MEM access or Bus Mastering.\n"); + debug("PCI command: %04x\n", word); + return 1; + } + + /* GPIO off */ + writel(0, (void *)(sata_info.iobase[0] + HOST_FLASH_CMD)); + /* clear global reset & mask interrupts during initialization */ + writel(0, (void *)(sata_info.iobase[0] + HOST_CTRL)); + + return 0; +} + +/* + * SATA interface between low level driver and command layer + */ +int scan_sata(int dev) +{ + unsigned char serial[ATA_ID_SERNO_LEN + 1]; + unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; + unsigned char product[ATA_ID_PROD_LEN + 1]; + struct sil_sata *sata; + void __iomem *port; + int cnt; + u16 *id; + u32 tmp; + + if (dev >= sata_info.maxport) { + printf("SATA#%d is not present\n", dev); + return 1; + } + + printf("SATA#%d\n", dev); + port = (void *)sata_info.iobase[1] + + PORT_REGS_SIZE * (dev - sata_info.portbase); + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_PORT_RST, PORT_CS_PORT_RST, 100); + if (tmp & PORT_CS_PORT_RST) + printf("Err: Failed to clear port RST\n"); + } + + /* Check if device is present */ + for (cnt = 0; cnt < 100; cnt++) { + tmp = readl(port + PORT_SSTATUS); + if ((tmp & 0xF) == 0x3) + break; + mdelay(1); + } + + tmp = readl(port + PORT_SSTATUS); + if ((tmp & 0xf) != 0x3) { + printf(" (No RDY)\n"); + return 1; + } + + /* Wait for port ready */ + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_RDY, PORT_CS_RDY, 100); + if ((tmp & PORT_CS_RDY) != PORT_CS_RDY) { + printf("%d port not ready.\n", dev); + return 1; + } + + /* configure port */ + sil_config_port(port); + + /* Reset port */ + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + readl(port + PORT_CTRL_STAT); + tmp = ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_DEV_RST, + PORT_CS_DEV_RST, 100); + if (tmp & PORT_CS_DEV_RST) { + printf("%d port reset failed.\n", dev); + return 1; + } + + sata = (struct sil_sata *)malloc(sizeof(struct sil_sata)); + if (!sata) { + printf("%d no memory.\n", dev); + return 1; + } + memset((void *)sata, 0, sizeof(struct sil_sata)); + + /* turn on port interrupt */ + tmp = readl((void *)(sata_info.iobase[0] + HOST_CTRL)); + tmp |= (1 << (dev - sata_info.portbase)); + writel(tmp, (void *)(sata_info.iobase[0] + HOST_CTRL)); + + /* Save the private struct to block device struct */ + sata_dev_desc[dev].priv = (void *)sata; + sata->port = port; + sata->devno = sata_info.devno; + sprintf(sata->name, "SATA#%d", dev); + sil_cmd_soft_reset(dev); + tmp = readl(port + PORT_SSTATUS); + tmp = (tmp >> 4) & 0xf; + printf(" (%s)\n", sata_spd_string(tmp)); + + id = (u16 *)malloc(ATA_ID_WORDS * 2); + if (!id) { + printf("Id malloc failed\n"); + free((void *)sata); + return 1; + } + sil_cmd_identify_device(dev, id); + +#ifdef CONFIG_LBA48 + /* Check if support LBA48 */ + if (ata_id_has_lba48(id)) { + sata_dev_desc[dev].lba48 = 1; + sata->lba48 = 1; + debug("Device supports LBA48\n"); + } else + debug("Device supports LBA28\n"); +#endif + + /* Serial number */ + ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); + memcpy(sata_dev_desc[dev].product, serial, sizeof(serial)); + + /* Firmware version */ + ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware)); + memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware)); + + /* Product model */ + ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); + memcpy(sata_dev_desc[dev].vendor, product, sizeof(product)); + + /* Totoal sectors */ + sata_dev_desc[dev].lba = ata_id_n_sectors(id); + + sil_sata_init_wcache(dev, id); + sil_cmd_set_feature(dev); + +#ifdef DEBUG + sil_cmd_identify_device(dev, id); + ata_dump_id(id); +#endif + free((void *)id); + + return 0; +} diff --git a/drivers/block/sata_sil.h b/drivers/block/sata_sil.h new file mode 100644 index 0000000..951c741 --- /dev/null +++ b/drivers/block/sata_sil.h @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Author: Tang Yuantian b29983@freescale.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef SATA_SIL3132_H +#define SATA_SIL3132_H + +#define READ_CMD 0 +#define WRITE_CMD 1 + +/* + * SATA device driver struct for each dev + */ +struct sil_sata { + char name[12]; + void __iomem *port; /* the port base address */ + int lba48; + u16 pio; + u16 mwdma; + u16 udma; + pci_dev_t devno; + int wcache; + int flush; + int flush_ext; +}; + +/* sata info for each controller */ +struct sata_info { + ulong iobase[3]; + pci_dev_t devno; + int portbase; + int maxport; +}; + +/* + * Scatter gather entry (SGE),MUST 8 bytes aligned + */ +struct sil_sge { + __le64 addr; + __le32 cnt; + __le32 flags; +} __attribute__ ((aligned(8), packed)); + +/* + * Port request block, MUST 8 bytes aligned + */ +struct sil_prb { + __le16 ctrl; + __le16 prot; + __le32 rx_cnt; + struct sata_fis_h2d fis; +} __attribute__ ((aligned(8), packed)); + +struct sil_cmd_block { + struct sil_prb prb; + struct sil_sge sge; +}; + +enum { + HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ + HOST_CTRL = 0x40, + HOST_IRQ_STAT = 0x44, + HOST_PHY_CFG = 0x48, + HOST_BIST_CTRL = 0x50, + HOST_BIST_PTRN = 0x54, + HOST_BIST_STAT = 0x58, + HOST_MEM_BIST_STAT = 0x5c, + HOST_FLASH_CMD = 0x70, + /* 8 bit regs */ + HOST_FLASH_DATA = 0x74, + HOST_TRANSITION_DETECT = 0x75, + HOST_GPIO_CTRL = 0x76, + HOST_I2C_ADDR = 0x78, /* 32 bit */ + HOST_I2C_DATA = 0x7c, + HOST_I2C_XFER_CNT = 0x7e, + HOST_I2C_CTRL = 0x7f, + + /* HOST_SLOT_STAT bits */ + HOST_SSTAT_ATTN = (1 << 31), + + /* HOST_CTRL bits */ + HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */ + HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */ + HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ + HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ + HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ + HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */ + + /* + * Port registers + * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) + */ + PORT_REGS_SIZE = 0x2000, + + PORT_LRAM = 0x0000, /* 31 LRAM slots and PMP regs */ + PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */ + + PORT_PMP = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */ + PORT_PMP_STATUS = 0x0000, /* port device status offset */ + PORT_PMP_QACTIVE = 0x0004, /* port device QActive offset */ + PORT_PMP_SIZE = 0x0008, /* 8 bytes per PMP */ + + /* 32 bit regs */ + PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ + PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ + PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ + PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ + PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ + PORT_ACTIVATE_UPPER_ADDR = 0x101c, + PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ + PORT_CMD_ERR = 0x1024, /* command error number */ + PORT_FIS_CFG = 0x1028, + PORT_FIFO_THRES = 0x102c, + + /* 16 bit regs */ + PORT_DECODE_ERR_CNT = 0x1040, + PORT_DECODE_ERR_THRESH = 0x1042, + PORT_CRC_ERR_CNT = 0x1044, + PORT_CRC_ERR_THRESH = 0x1046, + PORT_HSHK_ERR_CNT = 0x1048, + PORT_HSHK_ERR_THRESH = 0x104a, + + /* 32 bit regs */ + PORT_PHY_CFG = 0x1050, + PORT_SLOT_STAT = 0x1800, + PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 */ + PORT_CONTEXT = 0x1e04, + PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 */ + PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 */ + PORT_SCONTROL = 0x1f00, + PORT_SSTATUS = 0x1f04, + PORT_SERROR = 0x1f08, + PORT_SACTIVE = 0x1f0c, + + /* PORT_CTRL_STAT bits */ + PORT_CS_PORT_RST = (1 << 0), /* port reset */ + PORT_CS_DEV_RST = (1 << 1), /* device reset */ + PORT_CS_INIT = (1 << 2), /* port initialize */ + PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ + PORT_CS_PMP_RESUME = (1 << 6), /* PMP resume */ + PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ + PORT_CS_PMP_EN = (1 << 13), /* port multiplier enable */ + PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ + + /* PORT_IRQ_STAT/ENABLE_SET/CLR */ + /* bits[11:0] are masked */ + PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ + PORT_IRQ_ERROR = (1 << 1), /* command execution error */ + PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ + PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ + PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ + PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */ + PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */ + PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */ + PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */ + PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ + PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ + + DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | + PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | + PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY, + + /* bits[27:16] are unmasked (raw) */ + PORT_IRQ_RAW_SHIFT = 16, + PORT_IRQ_MASKED_MASK = 0x7ff, + PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), + + /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ + PORT_IRQ_STEER_SHIFT = 30, + PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), + + /* PORT_CMD_ERR constants */ + PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ + PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ + PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ + PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ + PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ + PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ + PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ + PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ + + /* bits of PRB control field */ + PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ + PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ + PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ + PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ + PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* PRB protocol field */ + PRB_PROT_PACKET = (1 << 0), + PRB_PROT_TCQ = (1 << 1), + PRB_PROT_NCQ = (1 << 2), + PRB_PROT_READ = (1 << 3), + PRB_PROT_WRITE = (1 << 4), + PRB_PROT_TRANSPARENT = (1 << 5), + + /* + * Other constants + */ + SGE_TRM = (1 << 31), /* Last SGE in chain */ + SGE_LNK = (1 << 30), /* linked list + Points to SGT, not SGE */ + SGE_DRD = (1 << 29), /* discard data read (/dev/null) + data address ignored */ + + CMD_ERR = 0x21, +}; + +#endif diff --git a/include/pci_ids.h b/include/pci_ids.h index 02a6c6e..12e4c02 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -2110,3 +2110,8 @@

#define PCI_VENDOR_ID_ADMTEK 0x1317 #define PCI_DEVICE_ID_ADMTEK_AN983B 0x0985 + +#define PCI_VENDOR_ID_SILICONIMAGE 0x1095 +#define PCI_DEVICE_ID_SIL3132 0x3132 +#define PCI_DEVICE_ID_SIL3124 0x3124 +#define PCI_DEVICE_ID_SIL3131 0x3131