[U-Boot] [PATCH] eb_cpux9k2: add USB host support to board
* add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de --- include/configs/eb_cpux9k2.h | 16 +++++++++++++++- 1 files changed, 15 insertions(+), 1 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 754fc8b..9d99f65 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 #define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
- #define CONFIG_BOOT_RETRY_TIME 30 #define CONFIG_CMDLINE_EDITING
@@ -137,6 +136,8 @@ #define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -168,6 +169,19 @@ * Hardware drivers */
+#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" + /* * UART/CONSOLE */
Hi Jens,
Le 22/04/2011 15:24, Jens Scharsig a écrit :
- add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsigjs_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 16 +++++++++++++++- 1 files changed, 15 insertions(+), 1 deletions(-)
This patch was left unanswered, and does not apply properly any more. At your convenience, please either drop it or post a rebased V2.
Amicalement,
* add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de --- include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index c4b1e65..b1fcec7 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -137,6 +137,8 @@ #define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -167,6 +169,18 @@ /* * Hardware drivers */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
/* * UART/CONSOLE
Hi Jens,
Le 10/07/2011 11:14, Jens Scharsig a écrit :
- add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
This fails to apply properly on current u-boot/master or u-boot-arm/master or u-boot-atmel/master. Which repository/branch is it supposed to be applied to?
Amicalement,
Am 2011-07-10 14:37, schrieb Albert ARIBAUD:
Hi Jens,
Le 10/07/2011 11:14, Jens Scharsig a écrit :
- add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
This fails to apply properly on current u-boot/master or u-boot-arm/master or u-boot-atmel/master. Which repository/branch is it supposed to be applied to?
I used u-boot-atmel/master as base to create this V2
Amicalement,
Regards
Jens
Am 10.07.2011 14:37, schrieb Albert ARIBAUD:
Hi Jens,
Le 10/07/2011 11:14, Jens Scharsig a écrit :
- add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsigjs_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
This fails to apply properly on current u-boot/master or u-boot-arm/master or u-boot-atmel/master. Which repository/branch is it supposed to be applied to?
The patch is correct but anything between me an you/list modifies the mails. There are additional spaces in my file.
Until I found why the mta's adds. I have attache the patch as file.
Best regards
Jens Scharsig
Dear Jens Scharsig,
Am 10.07.2011 14:37, schrieb Albert ARIBAUD:
Hi Jens,
Le 10/07/2011 11:14, Jens Scharsig a écrit :
- add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsigjs_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
This fails to apply properly on current u-boot/master or u-boot-arm/master or u-boot-atmel/master. Which repository/branch is it supposed to be applied to?
The patch is correct but anything between me an you/list modifies the mails. There are additional spaces in my file.
Until I found why the mta's adds. I have attache the patch as file.
Let me guess... using Thunderbird or alikes? They have issues with spaces. Please simply and just use git send-email instead!
The patch you sent as an attachment does indeed apply, but I remember its against the rules to use it; however patchworks does correctly handle it and I could get it with "pwclient get 104091"; so IMHO it should be fine to use it - Wolfgang?
Best Regards, Reinhard
Dear "u-boot@emk-elektronik.de",
In message 1310382637.7288.7.camel@ubuntu you wrote:
The patch you sent as an attachment does indeed apply, but I remember its against the rules to use it; however patchworks does correctly
Indeed patches shpuld be sent inline which makes reviewing and commenting much easier.
handle it and I could get it with "pwclient get 104091"; so IMHO it should be fine to use it - Wolfgang?
If it's OK with you, just go on and apply it.
Best regards,
Wolfgang Denk
Dear Jens Scharsig, Wolfgang Denk,
Dear "u-boot@emk-elektronik.de",
In message 1310382637.7288.7.camel@ubuntu you wrote:
The patch you sent as an attachment does indeed apply, but I remember its against the rules to use it; however patchworks does correctly
Indeed patches shpuld be sent inline which makes reviewing and commenting much easier.
handle it and I could get it with "pwclient get 104091"; so IMHO it should be fine to use it - Wolfgang?
If it's OK with you, just go on and apply it.
Applied to u-boot-atmel/next Thanks, Reinhard
Am 2011-07-11 13:10, schrieb u-boot@emk-elektronik.de:
Dear Jens Scharsig,
<snip>
The patch is correct but anything between me an you/list modifies the mails. There are additional spaces in my file.
Until I found why the mta's adds. I have attache the patch as file.
Let me guess... using Thunderbird or alikes? They have issues with spaces.
You are right. Since thunderbird was updated to 3.1.xx mails bad.
Please simply and just use git send-email instead!
Thanks for suggestion,
Jens
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de --- include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index c4b1e65..b1fcec7 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -137,6 +137,8 @@ #define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -167,6 +169,18 @@ /* * Hardware drivers */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
/* * UART/CONSOLE
This is a resend without modifications by mail client
Regards
Jens
Am 2011-07-12 18:00, schrieb Reinhard Meyer:
Dear Jens Scharsig,
This is a resend without modifications by mail client
Should it be better to say: The referenced email is ... ;-)
Really? It seems the patch was completely omitted.. :)
Reinhard
Jens
participants (6)
-
Albert ARIBAUD -
Jens Scharsig -
Jens Scharsig -
Reinhard Meyer -
u-boot＠emk-elektronik.de
-
Wolfgang Denk