[U-Boot-Users] how to u-boot in LPC2468 board using uClinux
do any one have u-boot.bin file for LPC2468 i downloaded u-boot-1.1.6 but i din't get the u-boot prombt in the terminal window its gets struck in the starting display itself
anyone pls help thanks in advance
Hi,
I'm trying to port uCLinux on to the LPC 2468-16 OEM Board. .HEX file is been generated by following the steps (Section 10) given in the document (Getting_started_with_uClinux), and now am trying to flash the same .HEX file to the board using Flash Magic tool and am facing some issue, please find the attachment for Error Snapshot.
On target side, all the necessary setting has been done including the jumper setting given in LPC2468_OEM_Board_Users_Guide.
but i din't get the u-boot prompt in the terminal window its gets struck in the starting display itself. http://old.nabble.com/file/p29815748/Error.jpg.JPG Error.jpg.JPG
Please help me out to resolve this.
-- With Regards, Shashidhar.H.G Associate Software Engineer. Dearborn Electronics India Pvt. Ltd.
Hi Shashidhar.H.G,
I'm trying to port uCLinux on to the LPC 2468-16 OEM Board.
You may have noticed that this is the U-Boot mailing list. If you have trouble with uCLinux, the linux-arm mailing list is more to the point.
.HEX file is been generated by following the steps (Section 10) given in the document (Getting_started_with_uClinux), and now am trying to flash the same .HEX file to the board using Flash Magic tool and am facing some issue, please find the attachment for Error Snapshot.
I have no clue what document you are talking about, sorry.
On target side, all the necessary setting has been done including the jumper setting given in LPC2468_OEM_Board_Users_Guide.
but i din't get the u-boot prompt in the terminal window its gets struck in the starting display itself. http://old.nabble.com/file/p29815748/Error.jpg.JPG Error.jpg.JPG
This seems like a general problem outside the scope of U-Boot. Have you communicated with the board previously at all? Are the cables correct?
Cheers Detlev
participants (3)
-
anand -
Detlev Zundel -
Shashidhar.H.G