The SPL clock code does configure the ECSPI clock frequency, which has to match the mxc-spi driver configuration for successful SPI NOR boot. Drop the assigned-clock from DT ecspi1 node on this board to let the SPL clock code do the configuration and keep it aligned with the driver expectation.

Signed-off-by: Marek Vasut marex@denx.de --- Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Fabio Estevam festevam@gmail.com Cc: Jagan Teki jagan@amarulasolutions.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi index cb6ea356fd7..805b5f57955 100644 --- a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi @@ -45,6 +45,9 @@ };

&ecspi1 { + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-rates; + /delete-property/ assigned-clock-parents; bootph-pre-ram; flash@0 { bootph-pre-ram;