[U-Boot-Users] ppc4xx: Problems running POST on PPC405GPr board
Hi
I am trying to add POST for my PPC405GPr based boards and I am running into a few problems:
a) the post/cpu/ppc4xx/uart.c assumed 4 UARTS. I would rather try only as much UARTs as defined by the CPUs. Would a patch like the attached one be considered a good solution for this problem?
b) looking at the log I get <4>POST cache FAILED <4>POST i2c PASSED <4>POST cpu PASSED <4>POST ethernet PASSED <4>POST spr The value of PIR special register is incorrect: 0x0000005F <4>The value of IVOR0 special register is incorrect: 0x2000005F <4>The value of IVOR1 special register is incorrect: 0x2000005F <4>The value of IVOR2 special register is incorrect: 0x2000005F <4>The value of IVOR3 special register is incorrect: 0x2000005F <4>The value of IVOR4 special register is incorrect: 0x2000005F <4>The value of IVOR5 special register is incorrect: 0x2000005F <4>The value of IVOR6 special register is incorrect: 0x2000005F <4>The value of IVOR7 special register is incorrect: 0x2000005F <4>The value of IVOR8 special register is incorrect: 0x2000005F <4>The value of IVOR10 special register is incorrect: 0x2000005F <4>The value of IVOR13 special register is incorrect: 0x2000005F <4>The value of IVOR14 special register is incorrect: 0x2000005F <4>The value of IVOR15 special register is incorrect: 0x2000005F <4>The value of DVLIM special register is incorrect: 0x2000005F <4>The value of IVLIM special register is incorrect: 0x2000005F <4>FAILED
What would be the correct #if to exclude the IVOR<x> part in post/cpu/ppc4xx/spr.c, as it make no sense to test these non existant registers on a PPC405 processor?
Has anybody a suggestion how to fill in a good value for for the PIR (Processor Identification Register)?
c) I will investigate the exact cause for the POST cache FAILED.
Best regards
Niklaus
Dear Niklaus,
in message 200801111806.38846.niklausgiger@gmx.ch you wrote:
I am trying to add POST for my PPC405GPr based boards and I am running into a few problems:
a) the post/cpu/ppc4xx/uart.c assumed 4 UARTS. I would rather try only as much UARTs as defined by the CPUs. Would a patch like the attached one be considered a good solution for this problem?
Nope, that's too ugly.
b) looking at the log I get
...
What would be the correct #if to exclude the IVOR<x> part in post/cpu/ppc4xx/spr.c, as it make no sense to test these non existant registers on a PPC405 processor?
Maybe the test should be skipped on processors that don't have it - how about testing the PVR?
Best regards,
Wolfgang Denk
Hi Niklaus,
On Friday 11 January 2008, Niklaus Giger wrote:
I am trying to add POST for my PPC405GPr based boards and I am running into a few problems:
a) the post/cpu/ppc4xx/uart.c assumed 4 UARTS. I would rather try only as much UARTs as defined by the CPUs. Would a patch like the attached one be considered a good solution for this problem?
It's not a good solution, since you can't select for example to only test UART0 and UART2.
b) looking at the log I get <4>POST cache FAILED <4>POST i2c PASSED <4>POST cpu PASSED <4>POST ethernet PASSED <4>POST spr The value of PIR special register is incorrect: 0x0000005F <4>The value of IVOR0 special register is incorrect: 0x2000005F <4>The value of IVOR1 special register is incorrect: 0x2000005F <4>The value of IVOR2 special register is incorrect: 0x2000005F <4>The value of IVOR3 special register is incorrect: 0x2000005F <4>The value of IVOR4 special register is incorrect: 0x2000005F <4>The value of IVOR5 special register is incorrect: 0x2000005F <4>The value of IVOR6 special register is incorrect: 0x2000005F <4>The value of IVOR7 special register is incorrect: 0x2000005F <4>The value of IVOR8 special register is incorrect: 0x2000005F <4>The value of IVOR10 special register is incorrect: 0x2000005F <4>The value of IVOR13 special register is incorrect: 0x2000005F <4>The value of IVOR14 special register is incorrect: 0x2000005F <4>The value of IVOR15 special register is incorrect: 0x2000005F <4>The value of DVLIM special register is incorrect: 0x2000005F <4>The value of IVLIM special register is incorrect: 0x2000005F <4>FAILED
What would be the correct #if to exclude the IVOR<x> part in post/cpu/ppc4xx/spr.c, as it make no sense to test these non existant registers on a PPC405 processor?
#if defined(CONFIG_440)
Has anybody a suggestion how to fill in a good value for for the PIR (Processor Identification Register)?
c) I will investigate the exact cause for the POST cache FAILED.
Please take a look at the zeus port. This is a quite new port for 405EP with some POST support.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================
participants (3)
-
Niklaus Giger -
Stefan Roese -
Wolfgang Denk