[U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support
This adds support for the Allwinner A10/A13 SoC's. Additionally board support for the dev-boards sun4i/sun5i is added.
Signed-off-by: Tom Cubie tangliang@allwinnertech.com Signed-off-by: Henrik Nordström henrik@henriknordstrom.net Signed-off-by: Stefan Roese sr@denx.de --- MAINTAINERS | 13 ++ arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/sunxi/Makefile | 51 +++++++ arch/arm/cpu/armv7/sunxi/board.c | 77 +++++++++++ arch/arm/cpu/armv7/sunxi/clock.c | 57 ++++++++ arch/arm/cpu/armv7/sunxi/pinmux.c | 61 +++++++++ arch/arm/cpu/armv7/sunxi/reset.S | 39 ++++++ arch/arm/cpu/armv7/sunxi/timer.c | 117 +++++++++++++++++ arch/arm/include/asm/arch-sunxi/clock.h | 179 +++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/cpu.h | 146 +++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/dram.h | 114 ++++++++++++++++ arch/arm/include/asm/arch-sunxi/gpio.h | 164 +++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/sys_proto.h | 32 +++++ arch/arm/include/asm/arch-sunxi/timer.h | 102 ++++++++++++++ board/sunxi/Makefile | 46 +++++++ board/sunxi/board.c | 57 ++++++++ boards.cfg | 4 + include/configs/sun4i.h | 47 +++++++ include/configs/sun5i.h | 56 ++++++++ include/configs/sunxi-common.h | 189 +++++++++++++++++++++++++++ 20 files changed, 1552 insertions(+), 1 deletions(-) create mode 100644 arch/arm/cpu/armv7/sunxi/Makefile create mode 100644 arch/arm/cpu/armv7/sunxi/board.c create mode 100644 arch/arm/cpu/armv7/sunxi/clock.c create mode 100644 arch/arm/cpu/armv7/sunxi/pinmux.c create mode 100644 arch/arm/cpu/armv7/sunxi/reset.S create mode 100644 arch/arm/cpu/armv7/sunxi/timer.c create mode 100644 arch/arm/include/asm/arch-sunxi/clock.h create mode 100644 arch/arm/include/asm/arch-sunxi/cpu.h create mode 100644 arch/arm/include/asm/arch-sunxi/dram.h create mode 100644 arch/arm/include/asm/arch-sunxi/gpio.h create mode 100644 arch/arm/include/asm/arch-sunxi/sys_proto.h create mode 100644 arch/arm/include/asm/arch-sunxi/timer.h create mode 100644 board/sunxi/Makefile create mode 100644 board/sunxi/board.c create mode 100644 include/configs/sun4i.h create mode 100644 include/configs/sun5i.h create mode 100644 include/configs/sunxi-common.h
diff --git a/MAINTAINERS b/MAINTAINERS index c430574..80c1bd7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -331,6 +331,19 @@ Reinhard Meyer reinhard.meyer@emk-elektronik.de TOP5200 MPC5200 TOP9000 ARM926EJS (AT91SAM9xxx SoC)
+Henrik Nordstrom henrik@henriknordstrom.net + A13_OLINUXINO ARM V7 (Allwinner A13 SoC) + A13_MID ARM V7 (Allwinner A13 SoC) + CUBIEBOARD ARM V7 (Allwinner A10 SoC) + CUBIEBOARD_512 ARM V7 (Allwinner A10 SoC) + HACKBERRY ARM V7 (Allwinner A10 SoC) + MELE_A1000 ARM V7 (Allwinner A10 SoC) + MINI-X ARM V7 (Allwinner A10 SoC) + SUN4I ARM V7 (Allwinner A10 SoC) + SUN4I_SDCON ARM V7 (Allwinner A10 SoC) + SUN5I ARM V7 (Allwinner A13 SoC) + SUN5I_SDCON ARM V7 (Allwinner A13 SoC) + Kyle Moffett Kyle.D.Moffett@boeing.com
HWW1U1A P2020 diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index da1b5e8..56f51b5 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -33,7 +33,7 @@ COBJS += cpu.o COBJS += syslib.o COBJS += cmd_boot.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20),) +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20)$(CONFIG_SUNXI),) SOBJS += lowlevel_init.o endif
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile new file mode 100644 index 0000000..cbe1015 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +SOBJS += reset.o + +COBJS += timer.o +COBJS += dram.o +COBJS += board.o +COBJS += clock.o +COBJS += pinmux.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c new file mode 100644 index 0000000..652c19d --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * Some init for sunxi platform. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <serial.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/timer.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> + +int gpio_init(void) +{ +#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) +#ifdef CONFIG_SUN4I + /* disable GPB22,23 as uart0 tx,rx to avoid conflict */ + gpio_direction_input(SUNXI_GPB(22)); + gpio_direction_input(SUNXI_GPB(23)); +#endif + sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN4I) + sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); +#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I) + sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART0_RX); +#else +#error Unsupported console port number. Please fix pin mux settings in board.c +#endif + + return 0; +} + +/* do some early init */ +void s_init(void) +{ + clock_init(); + gpio_init(); +} + +void reset_cpu(ulong addr) +{ + sunxi_reset(); +} + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c new file mode 100644 index 0000000..424acfc --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock.c @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> + +int clock_init(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* uart clock source is apb1 */ + sr32(&ccm->apb1_clk_div_cfg, 24, 2, APB1_CLK_SRC_OSC24M); + sr32(&ccm->apb1_clk_div_cfg, 16, 2, APB1_FACTOR_N); + sr32(&ccm->apb1_clk_div_cfg, 0, 5, APB1_FACTOR_M); + + /* open the clock for uart */ + sr32(&ccm->apb1_gate, 16 + CONFIG_CONS_INDEX - 1, 1, CLK_GATE_OPEN); + + return 0; +} + +/* Return PLL5 frequency in Hz + * Note: Assumes PLL5 reference is 24MHz clock + */ +unsigned int clock_get_pll5(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll5_cfg); + int n = (rval >> 8) & 0x1f; + int k = ((rval >> 4) & 3) + 1; + int p = 1 << ((rval >> 16) & 3); + return 24000000 * n * k / p; +} diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c b/arch/arm/cpu/armv7/sunxi/pinmux.c new file mode 100644 index 0000000..77e1d90 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/pinmux.c @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> + +int sunxi_gpio_set_cfgpin(u32 pin, u32 val) +{ + u32 cfg; + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_CFG_INDEX(pin); + u32 offset = GPIO_CFG_OFFSET(pin); + struct sunxi_gpio *pio = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]; + + cfg = readl(&pio->cfg[0] + index); + cfg &= ~(0xf << offset); + cfg |= val << offset; + + writel(cfg, &pio->cfg[0] + index); + + return 0; +} + +int sunxi_gpio_get_cfgpin(u32 pin) +{ + u32 cfg; + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_CFG_INDEX(pin); + u32 offset = GPIO_CFG_OFFSET(pin); + struct sunxi_gpio *pio = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]; + + cfg = readl(&pio->cfg[0] + index); + cfg >>= offset; + + return cfg & 0xf; +} + diff --git a/arch/arm/cpu/armv7/sunxi/reset.S b/arch/arm/cpu/armv7/sunxi/reset.S new file mode 100644 index 0000000..36714e7 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/reset.S @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * Configuration settings for the Allwinner A10-evb board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/cpu.h> + +#define SUNXI_WDOG_CTL 0x01C20C90 +#define SUNXI_WDOG_MODE 0x01C20C94 + +.globl sunxi_reset +sunxi_reset: + ldr r1, =SUNXI_WDOG_MODE + mov r3, #0x3 + str r3, [r1] + mov r0, r0 +_loop_forever: + b _loop_forever diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/cpu/armv7/sunxi/timer.c new file mode 100644 index 0000000..e19df09 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/timer.c @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/timer.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define TIMER_MODE (0 << 7) /* continuous mode */ +#define TIMER_DIV (0 << 4) /* pre scale 1 */ +#define TIMER_SRC (1 << 2) /* osc24m */ +#define TIMER_RELOAD (1 << 1) /* reload internal value */ +#define TIMER_EN (1 << 0) /* enable timer */ + +#define TIMER_CLOCK (24 * 1000 * 1000) +#define COUNT_TO_USEC(x) ((x) / 24) +#define USEC_TO_COUNT(x) ((x) * 24) +#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) +#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) + +#define TIMER_LOAD_VAL 0xffffffff + +#define TIMER_NUM 0 /* we use timer 0 */ + +static struct sunxi_timer *timer_base = + &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->timer[TIMER_NUM]; + +/* macro to read the 32 bit timer: since it decrements, we invert read value */ +#define READ_TIMER() (~readl(&timer_base->val)) + +/* init timer register */ +int timer_init(void) +{ + writel(TIMER_LOAD_VAL, &timer_base->inter); + writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN, + &timer_base->ctl); + + return 0; +} + +/* timer without interrupts */ +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = TICKS_TO_HZ(READ_TIMER()); + + if (now >= gd->lastinc) /* normal (non rollover) */ + gd->tbl += (now - gd->lastinc); + else /* rollover */ + gd->tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) - gd->lastinc) + now; + gd->lastinc = now; + + return gd->tbl; +} + +/* delay x useconds */ +void __udelay(unsigned long usec) +{ + long tmo = usec * (TIMER_CLOCK / 1000) / 1000; + ulong now, last = READ_TIMER(); + + while (tmo > 0) { + now = READ_TIMER(); + if (now > last) /* normal (non rollover) */ + tmo -= now - last; + else /* rollover */ + tmo -= TIMER_LOAD_VAL - last + now; + last = now; + } +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + tbclk = CONFIG_SYS_HZ; + return tbclk; +} diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h new file mode 100644 index 0000000..863e59e --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -0,0 +1,179 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_CLOCK_H +#define _SUNXI_CLOCK_H + +/* clock control module regs definition */ + +struct sunxi_ccm_reg { + u32 pll1_cfg; /* 0x00 pll1 control */ + u32 pll1_tun; /* 0x04 pll1 tuning */ + u32 pll2_cfg; /* 0x08 pll2 control */ + u32 pll2_tun; /* 0x0c pll2 tuning */ + u32 pll3_cfg; /* 0x10 pll3 control */ + u8 res0[0x4]; + u32 pll4_cfg; /* 0x18 pll4 control */ + u8 res1[0x4]; + u32 pll5_cfg; /* 0x20 pll5 control */ + u32 pll5_tun; /* 0x24 pll5 tuning */ + u32 pll6_cfg; /* 0x28 pll6 control */ + u32 pll6_tun; /* 0x2c pll6 tuning */ + u32 pll7_cfg; /* 0x30 pll7 control */ + u32 pll1_tun2; /* 0x34 pll5 tuning2 */ + u8 res2[0x4]; + u32 pll5_tun2; /* 0x3c pll5 tuning2 */ + u8 res3[0xc]; + u32 pll_lock_dbg; /* 0x4c pll lock time debug */ + u32 osc24m_cfg; /* 0x50 osc24m control */ + u32 cpu_ahb_apb0_cfg; /* 0x54 cpu,ahb and apb0 divide ratio */ + u32 apb1_clk_div_cfg; /* 0x58 apb1 clock dividor */ + u32 axi_gate; /* 0x5c axi module clock gating */ + u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */ + u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ + u32 apb0_gate; /* 0x68 apb0 module clock gating */ + u32 apb1_gate; /* 0x6c apb1 module clock gating */ + u8 res4[0x10]; + u32 nand_sclk_cfg; /* 0x80 nand sub clock control */ + u32 ms_sclk_cfg; /* 0x84 memory stick sub clock control */ + u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ + u32 sd1_clk_cfg; /* 0x8c sd1 clock control */ + u32 sd2_clk_cfg; /* 0x90 sd2 clock control */ + u32 sd3_clk_cfg; /* 0x94 sd3 clock control */ + u32 ts_clk_cfg; /* 0x98 transport stream clock control */ + u32 ss_clk_cfg; /* 0x9c */ + u32 spi0_clk_cfg; /* 0xa0 */ + u32 spi1_clk_cfg; /* 0xa4 */ + u32 spi2_clk_cfg; /* 0xa8 */ + u32 pata_clk_cfg; /* 0xac */ + u32 ir0_clk_cfg; /* 0xb0 */ + u32 ir1_clk_cfg; /* 0xb4 */ + u32 iis_clk_cfg; /* 0xb8 */ + u32 ac97_clk_cfg; /* 0xbc */ + u32 spdif_clk_cfg; /* 0xc0 */ + u32 keypad_clk_cfg; /* 0xc4 */ + u32 sata_clk_cfg; /* 0xc8 */ + u32 usb_clk_cfg; /* 0xcc */ + u32 gps_clk_cfg; /* 0xd0 */ + u32 spi3_clk_cfg; /* 0xd4 */ + u8 res5[0x28]; + u32 dram_clk_cfg; /* 0x100 */ + u32 be0_clk_cfg; /* 0x104 */ + u32 be1_clk_cfg; /* 0x108 */ + u32 fe0_clk_cfg; /* 0x10c */ + u32 fe1_clk_cfg; /* 0x110 */ + u32 mp_clk_cfg; /* 0x114 */ + u32 lcd0_ch0_clk_cfg; /* 0x118 */ + u32 lcd1_ch0_clk_cfg; /* 0x11c */ + u32 csi_isp_clk_cfg; /* 0x120 */ + u8 res6[0x4]; + u32 tvd_clk_reg; /* 0x128 */ + u32 lcd0_ch1_clk_cfg; /* 0x12c */ + u32 lcd1_ch1_clk_cfg; /* 0x130 */ + u32 csi0_clk_cfg; /* 0x134 */ + u32 csi1_clk_cfg; /* 0x138 */ + u32 ve_clk_cfg; /* 0x13c */ + u32 audio_codec_clk_cfg; /* 0x140 */ + u32 avs_clk_cfg; /* 0x144 */ + u32 ace_clk_cfg; /* 0x148 */ + u32 lvds_clk_cfg; /* 0x14c */ + u32 hdmi_clk_cfg; /* 0x150 */ + u32 mali_clk_cfg; /* 0x154 */ + u8 res7[0x4]; + u32 mbus_clk_cfg; /* 0x15c */ +}; + +/* apb1 bit field */ +#define APB1_CLK_SRC_OSC24M 0 +#define APB1_FACTOR_M 0 +#define APB1_FACTOR_N 0 + +/* clock divide */ +#define CPU_CLK_SRC_OSC24M 1 +#define CPU_CLK_SRC_PLL1 2 +#define AXI_DIV_1 0 +#define AXI_DIV_2 1 +#define AXI_DIV_3 2 +#define AXI_DIV_4 3 +#define AHB_DIV_1 0 +#define AHB_DIV_2 1 +#define AHB_DIV_4 2 +#define AHB_DIV_8 3 +#define APB0_DIV_1 0 +#define APB0_DIV_2 1 +#define APB0_DIV_4 2 +#define APB0_DIV_8 3 + +#ifdef CONFIG_SUN5I +#define AHB_CLK_SRC_AXI 0 +#endif + +#define CLK_GATE_OPEN 0x1 +#define CLK_GATE_CLOSE 0x0 + +/* nand clock */ +#define NAND_CLK_SRC_OSC24 0 +#define NAND_CLK_DIV_N 0 +#define NAND_CLK_DIV_M 0 + +/* gps clock */ +#define GPS_SCLK_GATING_OFF 0 +#define GPS_RESET 0 + +/* ahb clock gate bit offset */ +#define AHB_GATE_OFFSET_GPS 26 +#define AHB_GATE_OFFSET_SATA 25 +#define AHB_GATE_OFFSET_PATA 24 +#define AHB_GATE_OFFSET_SPI3 23 +#define AHB_GATE_OFFSET_SPI2 22 +#define AHB_GATE_OFFSET_SPI1 21 +#define AHB_GATE_OFFSET_SPI0 20 +#define AHB_GATE_OFFSET_TS0 18 +#define AHB_GATE_OFFSET_EMAC 17 +#define AHB_GATE_OFFSET_ACE 16 +#define AHB_GATE_OFFSET_DLL 15 +#define AHB_GATE_OFFSET_SDRAM 14 +#define AHB_GATE_OFFSET_NAND 13 +#define AHB_GATE_OFFSET_MS 12 +#define AHB_GATE_OFFSET_MMC3 11 +#define AHB_GATE_OFFSET_MMC2 10 +#define AHB_GATE_OFFSET_MMC1 9 +#define AHB_GATE_OFFSET_MMC0 8 +#define AHB_GATE_OFFSET_BIST 7 +#define AHB_GATE_OFFSET_DMA 6 +#define AHB_GATE_OFFSET_SS 5 +#define AHB_GATE_OFFSET_USB_OHCI1 4 +#define AHB_GATE_OFFSET_USB_EHCI1 3 +#define AHB_GATE_OFFSET_USB_OHCI0 2 +#define AHB_GATE_OFFSET_USB_EHCI0 1 +#define AHB_GATE_OFFSET_USB 0 + +#ifndef __ASSEMBLY__ +int clock_init(void); +int clock_twi_onoff(int port, int state); +void clock_set_pll1(int mhz); +unsigned int clock_get_pll5(void); +#endif + +#endif /* _SUNXI_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h new file mode 100644 index 0000000..6c8eaeb --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_CPU_H +#define _SUNXI_CPU_H + +#define SUNXI_SRAM_A1_BASE 0x00000000 +#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16k */ + +#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16k */ +#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13k */ +#define SUNXI_SRAM_A4_BASE 0x0000B400 /* 3k */ +#define SUNXI_SRAM_D_BASE 0x01C00000 +#define SUNXI_SRAM_B_BASE 0x01C00000 /* 64k(secure) */ + +#define SUNXI_SRAMC_BASE 0x01C00000 +#define SUNXI_DRAMC_BASE 0x01C01000 +#define SUNXI_DMA_BASE 0x01C02000 +#define SUNXI_NFC_BASE 0x01C03000 +#define SUNXI_TS_BASE 0x01C04000 +#define SUNXI_SPI0_BASE 0x01C05000 +#define SUNXI_SPI1_BASE 0x01C06000 +#define SUNXI_MS_BASE 0x01C07000 +#define SUNXI_TVD_BASE 0x01C08000 +#define SUNXI_CSI0_BASE 0x01C09000 +#define SUNXI_TVE0_BASE 0x01C0A000 +#define SUNXI_EMAC_BASE 0x01C0B000 +#define SUNXI_LCD0_BASE 0x01C0C000 +#define SUNXI_LCD1_BASE 0x01C0D000 +#define SUNXI_VE_BASE 0x01C0E000 +#define SUNXI_MMC0_BASE 0x01C0F000 +#define SUNXI_MMC1_BASE 0x01C10000 +#define SUNXI_MMC2_BASE 0x01C11000 +#define SUNXI_MMC3_BASE 0x01C12000 +#define SUNXI_USB0_BASE 0x01C13000 +#define SUNXI_USB1_BASE 0x01C14000 +#define SUNXI_SS_BASE 0x01C15000 +#define SUNXI_HDMI_BASE 0x01C16000 +#define SUNXI_SPI2_BASE 0x01C17000 +#define SUNXI_SATA_BASE 0x01C18000 +#define SUNXI_PATA_BASE 0x01C19000 +#define SUNXI_ACE_BASE 0x01C1A000 +#define SUNXI_TVE1_BASE 0x01C1B000 +#define SUNXI_USB2_BASE 0x01C1C000 +#define SUNXI_CSI1_BASE 0x01C1D000 +#define SUNXI_TZASC_BASE 0x01C1E000 +#define SUNXI_SPI3_BASE 0x01C1F000 + +#define SUNXI_CCM_BASE 0x01C20000 +#define SUNXI_INTC_BASE 0x01C20400 +#define SUNXI_PIO_BASE 0x01C20800 +#define SUNXI_TIMER_BASE 0x01C20C00 +#define SUNXI_SPDIF_BASE 0x01C21000 +#define SUNXI_AC97_BASE 0x01C21400 +#define SUNXI_IR0_BASE 0x01C21800 +#define SUNXI_IR1_BASE 0x01C21C00 + +#define SUNXI_IIS_BASE 0x01C22400 +#define SUNXI_LRADC_BASE 0x01C22800 +#define SUNXI_AD_DA_BASE 0x01C22C00 +#define SUNXI_KEYPAD_BASE 0x01C23000 +#define SUNXI_TZPC_BASE 0x01C23400 +#define SUNXI_SID_BASE 0x01C23800 +#define SUNXI_SJTAG_BASE 0x01C23C00 + +#define SUNXI_TP_BASE 0x01C25000 +#define SUNXI_PMU_BASE 0x01C25400 + +#define SUNXI_UART0_BASE 0x01C28000 +#define SUNXI_UART1_BASE 0x01C28400 +#define SUNXI_UART2_BASE 0x01C28800 +#define SUNXI_UART3_BASE 0x01C28C00 +#define SUNXI_UART4_BASE 0x01C29000 +#define SUNXI_UART5_BASE 0x01C29400 +#define SUNXI_UART6_BASE 0x01C29800 +#define SUNXI_UART7_BASE 0x01C29C00 +#define SUNXI_PS2_0_BASE 0x01C2A000 +#define SUNXI_PS2_1_BASE 0x01C2A400 + +#define SUNXI_TWI0_BASE 0x01C2AC00 +#define SUNXI_TWI1_BASE 0x01C2B000 +#define SUNXI_TWI2_BASE 0x01C2B400 + +#define SUNXI_CAN_BASE 0x01C2BC00 + +#define SUNXI_SCR_BASE 0x01C2C400 + +#define SUNXI_GPS_BASE 0x01C30000 +#define SUNXI_MALI400_BASE 0x01C40000 + +/* module sram */ +#define SUNXI_SRAM_C_BASE 0x01D00000 + +#define SUNXI_DE_FE0_BASE 0x01E00000 +#define SUNXI_DE_FE1_BASE 0x01E20000 +#define SUNXI_DE_BE0_BASE 0x01E60000 +#define SUNXI_DE_BE1_BASE 0x01E40000 +#define SUNXI_MP_BASE 0x01E80000 +#define SUNXI_AVG_BASE 0x01EA0000 + +/* CoreSight Debug Module */ +#define SUNXI_CSDM_BASE 0x3F500000 + +#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2G */ + +#define SUNXI_BROM_BASE 0xFFFF0000 /* 32K */ + +#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c) + +#ifndef __ASSEMBLY__ +/* boot type */ +enum sunxi_boot_type_t { + SUNXI_BOOT_TYPE_NULL, + SUNXI_BOOT_TYPE_MMC0, + SUNXI_BOOT_TYPE_NAND, + SUNXI_BOOT_TYPE_MMC2, + SUNXI_BOOT_TYPE_SPI +}; + +sunxi_boot_type_t get_boot_type(void); +void sunxi_board_init(void); +extern void sunxi_reset(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h new file mode 100644 index 0000000..d3c0e9f --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing bergxing@allwinnertech.com + * Tom Cubie tangliang@allwinnertech.com + * + * Sunxi platform dram register definition. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_DRAM_H +#define _SUNXI_DRAM_H + +struct sunxi_dram_reg { + u32 ccr; /* 0x00 controller configuration register */ + u32 dcr; /* 0x04 dram configuration register */ + u32 iocr; /* 0x08 i/o configuration register */ + u32 csr; /* 0x0c controller status register */ + u32 drr; /* 0x10 dram refresh register */ + u32 tpr0; /* 0x14 dram timing parameters register 0 */ + u32 tpr1; /* 0x18 dram timing parameters register 1 */ + u32 tpr2; /* 0x1c dram timing parameters register 2 */ + u32 gdllcr; /* 0x20 global dll control register */ + u8 res0[0x28]; + u32 rslr0; /* 0x4c rank system latency register */ + u32 rslr1; /* 0x50 rank system latency register */ + u8 res1[0x8]; + u32 rdgr0; /* 0x5c rank dqs gating register */ + u32 rdgr1; /* 0x60 rank dqs gating register */ + u8 res2[0x34]; + u32 odtcr; /* 0x98 odt configuration register */ + u32 dtr0; /* 0x9c data training register 0 */ + u32 dtr1; /* 0xa0 data training register 1 */ + u32 dtar; /* 0xa4 data training address register */ + u32 zqcr0; /* 0xa8 zq control register 0 */ + u32 zqcr1; /* 0xac zq control register 1 */ + u32 zqsr; /* 0xb0 zq status register */ + u32 idcr; /* 0xb4 initializaton delay configure reg */ + u8 res3[0x138]; + u32 mr; /* 0x1f0 mode register */ + u32 emr; /* 0x1f4 extended mode register */ + u32 emr2; /* 0x1f8 extended mode register */ + u32 emr3; /* 0x1fc extended mode register */ + u32 dllctr; /* 0x200 dll control register */ + u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */ + /* 0x208 dll control register 1(byte 1) */ + /* 0x20c dll control register 2(byte 2) */ + /* 0x210 dll control register 3(byte 3) */ + /* 0x214 dll control register 4(byte 4) */ + u32 dqtr0; /* 0x218 dq timing register */ + u32 dqtr1; /* 0x21c dq timing register */ + u32 dqtr2; /* 0x220 dq timing register */ + u32 dqtr3; /* 0x224 dq timing register */ + u32 dqstr; /* 0x228 dqs timing register */ + u32 dqsbtr; /* 0x22c dqsb timing register */ + u32 mcr; /* 0x230 mode configure register */ + u8 res[0x8]; + u32 ppwrsctl; /* 0x23c pad power save control */ + u32 apr; /* 0x240 arbiter period register */ + u32 pldtr; /* 0x244 priority level data threshold reg */ + u8 res5[0x8]; + u32 hpcr[32]; /* 0x250 host port configure register */ + u8 res6[0x10]; + u32 csel; /* 0x2e0 controller select register */ +}; + +struct dram_para { + u32 clock; + u32 type; + u32 rank_num; + u32 density; + u32 io_width; + u32 bus_width; + u32 cas; + u32 zq; + u32 odt_en; + u32 size; + u32 tpr0; + u32 tpr1; + u32 tpr2; + u32 tpr3; + u32 tpr4; + u32 tpr5; + u32 emr1; + u32 emr2; + u32 emr3; +}; + +#define SUN5I_DRAM_MCR_DCLK_OUT_OFFSET 16 +#define SUN4I_CCM_SDRAM_DCLK_OUT_OFFSET 15 + +#define DRAM_CTRL_SELECT_MAGIC 0x16237495 + +int sunxi_dram_init(void); +int dramc_init(struct dram_para *para); + +#endif /* _SUNXI_DRAM_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h new file mode 100644 index 0000000..fceee6b --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -0,0 +1,164 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_GPIO_H +#define _SUNXI_GPIO_H + +/* + * sunxi has 9 banks of gpio, they are: + * PA0 - PA17 | PB0 - PB23 | PC0 - PC24 + * PD0 - PD27 | PE0 - PE31 | PF0 - PF5 + * PG0 - PG9 | PH0 - PH27 | PI0 - PI12 + */ + +#define SUNXI_GPIO_A 0 +#define SUNXI_GPIO_B 1 +#define SUNXI_GPIO_C 2 +#define SUNXI_GPIO_D 3 +#define SUNXI_GPIO_E 4 +#define SUNXI_GPIO_F 5 +#define SUNXI_GPIO_G 6 +#define SUNXI_GPIO_H 7 +#define SUNXI_GPIO_I 8 + +struct sunxi_gpio { + u32 cfg[4]; + u32 dat; + u32 drv[2]; + u32 pull[2]; +}; + +/* gpio interrupt control */ +struct sunxi_gpio_int { + u32 cfg[3]; + u32 ctl; + u32 sta; + u32 deb; /* interrupt debounce */ +}; + +struct sunxi_gpio_reg { + struct sunxi_gpio gpio_bank[9]; + u8 res[0xbc]; + struct sunxi_gpio_int gpio_int; +}; + +#define GPIO_BANK(pin) ((pin) >> 5) +#define GPIO_NUM(pin) ((pin) & 0x1F) + +#define GPIO_CFG_INDEX(pin) (((pin) & 0x1F) >> 3) +#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1F) & 0x7) << 2) + +/* GPIO bank sizes */ +#define SUNXI_GPIO_A_NR 32 +#define SUNXI_GPIO_B_NR 32 +#define SUNXI_GPIO_C_NR 32 +#define SUNXI_GPIO_D_NR 32 +#define SUNXI_GPIO_E_NR 32 +#define SUNXI_GPIO_F_NR 32 +#define SUNXI_GPIO_G_NR 32 +#define SUNXI_GPIO_H_NR 32 +#define SUNXI_GPIO_I_NR 32 + +#define SUNXI_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + 0) + +enum sunxi_gpio_number { + SUNXI_GPIO_A_START = 0, + SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A), + SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B), + SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C), + SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D), + SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E), + SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F), + SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G), + SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), +}; + +/* SUNXI GPIO number definitions */ +#define SUNXI_GPA(_nr) (SUNXI_GPIO_A_START + (_nr)) +#define SUNXI_GPB(_nr) (SUNXI_GPIO_B_START + (_nr)) +#define SUNXI_GPC(_nr) (SUNXI_GPIO_C_START + (_nr)) +#define SUNXI_GPD(_nr) (SUNXI_GPIO_D_START + (_nr)) +#define SUNXI_GPE(_nr) (SUNXI_GPIO_E_START + (_nr)) +#define SUNXI_GPF(_nr) (SUNXI_GPIO_F_START + (_nr)) +#define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr)) +#define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr)) +#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) + +/* GPIO pin function config */ +#define SUNXI_GPIO_INPUT 0 +#define SUNXI_GPIO_OUTPUT 1 + +#define SUNXI_GPA0_ERXD3 2 +#define SUNXI_GPA0_SPI1_CS0 3 +#define SUNXI_GPA0_UART2_RTS 4 + +#define SUNXI_GPA1_ERXD2 2 +#define SUNXI_GPA1_SPI1_CLK 3 +#define SUNXI_GPA1_UART2_CTS 4 + +#define SUNXI_GPA2_ERXD1 2 +#define SUNXI_GPA2_SPI1_MOSI 3 +#define SUNXI_GPA2_UART2_TX 4 + +#define SUNXI_GPA10_UART1_TX 4 +#define SUNXI_GPA11_UART1_RX 4 + +#define SUN4I_GPB22_UART0_TX 2 +#define SUN4I_GPB23_UART0_RX 2 + +#define SUN5I_GPG3_UART0_TX 4 +#define SUN5I_GPG4_UART0_RX 4 + +#define SUNXI_GPC2_NCLE 2 +#define SUNXI_GPC2_SPI0_CLK 3 + +#define SUNXI_GPC6_NRB0 2 +#define SUNXI_GPC6_SDC2_CMD 3 + +#define SUNXI_GPC7_NRB1 2 +#define SUNXI_GPC7_SDC2_CLK 3 + +#define SUNXI_GPC8_NDQ0 2 +#define SUNXI_GPC8_SDC2_D0 3 + +#define SUNXI_GPC9_NDQ1 2 +#define SUNXI_GPC9_SDC2_D1 3 + +#define SUNXI_GPC10_NDQ2 2 +#define SUNXI_GPC10_SDC2_D2 3 + +#define SUNXI_GPC11_NDQ3 2 +#define SUNXI_GPC11_SDC2_D3 3 + +#define SUNXI_GPF2_SDC0_CLK 2 +#define SUNXI_GPF2_UART0_TX 4 + +#define SUNXI_GPF4_SDC0_D3 2 +#define SUNXI_GPF4_UART0_RX 4 + +int sunxi_gpio_set_cfgpin(u32 pin, u32 val); +int sunxi_gpio_get_cfgpin(u32 pin); + +#endif /* _SUNXI_GPIO_H */ diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h new file mode 100644 index 0000000..1e8ae5d --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +void sr32(u32 *, u32, u32, u32); +void sdelay(unsigned long); +void watchdog_init(void); + +#endif diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h new file mode 100644 index 0000000..cbfec53 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -0,0 +1,102 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * Configuration settings for the Allwinner A10-evb board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_TIMER_H_ +#define _SUNXI_TIMER_H_ + +#ifndef __ASSEMBLY__ + +/* General purpose timer */ +struct sunxi_timer { + u32 ctl; + u32 inter; + u32 val; + u8 res[4]; +}; + +/* Audio video sync*/ +struct sunxi_avs { + u32 ctl; /* 0x80 */ + u32 cnt0; /* 0x84 */ + u32 cnt1; /* 0x88 */ + u32 div; /* 0x8c */ +}; + +/* 64 bit counter */ +struct sunxi_64cnt { + u32 ctl; /* 0xa0 */ + u32 lo; /* 0xa4 */ + u32 hi; /* 0xa8 */ +}; + +/* Watchdog */ +struct sunxi_wdog { + u32 ctl; /* 0x90 */ + u32 mode; /* 0x94 */ +}; + +/* Rtc */ +struct sunxi_rtc { + u32 ctl; /* 0x100 */ + u32 yymmdd; /* 0x104 */ + u32 hhmmss; /* 0x108 */ +}; + +/* Alarm */ +struct sunxi_alarm { + u32 ddhhmmss; /* 0x10c */ + u32 hhmmss; /* 0x110 */ + u32 en; /* 0x114 */ + u32 irqen; /* 0x118 */ + u32 irqsta; /* 0x11c */ +}; + +/* Timer general purpose register */ +struct sunxi_tgp { + u32 tgpd; +}; + +struct sunxi_timer_reg { + u32 tirqen; /* 0x00 */ + u32 tirqsta; /* 0x04 */ + u8 res1[8]; + struct sunxi_timer timer[6]; /* We have 6 timers */ + u8 res2[16]; + struct sunxi_avs avs; + struct sunxi_wdog wdog; + u8 res3[8]; + struct sunxi_64cnt cnt64; + u8 res4[0x58]; + struct sunxi_rtc rtc; + struct sunxi_alarm alarm; + struct sunxi_tgp tgp[4]; + u8 res5[8]; + u32 cpu_cfg; +}; + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile new file mode 100644 index 0000000..43acbab --- /dev/null +++ b/board/sunxi/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)lib$(BOARD).o + +COBJS-y := board.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################## diff --git a/board/sunxi/board.c b/board/sunxi/board.c new file mode 100644 index 0000000..ae05953 --- /dev/null +++ b/board/sunxi/board.c @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * Some board init for the Allwinner A10-evb board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/dram.h> +#include <asm/arch/clock.h> +#include <asm/arch/mmc.h> +#include <axp209.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* add board specific code here */ +int board_init(void) +{ + gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100); + + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("Board: %s\n", CONFIG_SYS_BOARD_NAME); + + return 0; +} +#endif + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, 1 << 30); + + return 0; +} diff --git a/boards.cfg b/boards.cfg index 7ae663c..13d1f74 100644 --- a/boards.cfg +++ b/boards.cfg @@ -288,6 +288,10 @@ whistler arm armv7:arm720t whistler nvidia colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20 u8500_href arm armv7 u8500 st-ericsson u8500 snowball arm armv7 snowball st-ericsson u8500 +sun4i arm armv7 sunxi - sunxi sun4i +sun4i_sdcon arm armv7 sunxi - sunxi sun4i:UART0_PORT_F +sun5i arm armv7 sunxi - sunxi sun5i +sun5i_sdcon arm armv7 sunxi - sunxi sun5i:UART0_PORT_F kzm9g arm armv7 kzm9g kmc rmobile armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile zynq arm armv7 zynq xilinx zynq diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h new file mode 100644 index 0000000..513f618 --- /dev/null +++ b/include/configs/sun4i.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2012 + * Henrik Nordstrom henrik@henriknordstrom.net + * + * Configuration settings for the Allwinner A10 (sun4i) CPU + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Include common sunxi configuration where most the settings are + */ +#include <configs/sunxi-common.h> + +/* + * A10 specific configuration + */ +#define CONFIG_SUN4I /* sun4i SoC generation */ + +#define CONFIG_SYS_PROMPT "sun4i#" +#define CONFIG_MACH_TYPE 4104 + +/* Define this to have console redirected to SD port */ +/* #define CONFIG_UART0_PORT_F */ + +#define CONFIG_CONS_INDEX 1 /* UART0 */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h new file mode 100644 index 0000000..dc84aba --- /dev/null +++ b/include/configs/sun5i.h @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2012 + * Henrik Nordstrom henrik@henriknordstrom.net + * + * Configuration settings for the Allwinner A13 (sun5i) CPU + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Include common sunxi configuration where most the settings are + */ +#include <configs/sunxi-common.h> + +/* + * High Level Configuration Options + */ +#define CONFIG_SUN5I /* sun5i SoC generation */ + +#define CONFIG_SYS_PROMPT "sun5i#" +#define CONFIG_MACH_TYPE 4138 + +/* Define this to have serial channel 1 (UART0) redirected to SD port */ +/* #define CONFIG_UART0_PORT_F */ + +#ifndef CONFIG_CONS_INDEX +#ifdef CONFIG_UART0_PORT_F +#define CONFIG_CONS_INDEX 1 /* UART0 on PORT_F (sdcard) */ +#else +#define CONFIG_CONS_INDEX 2 /* UART1 */ +#endif +#endif + +/* Leave ICACHE off while debugging with OpenOCD */ +#define CONFIG_SYS_ICACHE_OFF + +#endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h new file mode 100644 index 0000000..33309f3 --- /dev/null +++ b/include/configs/sunxi-common.h @@ -0,0 +1,189 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * Configuration settings for the Allwinner A10-evb board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_CONFIG_H +#define _SUNXI_CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ALLWINNER /* It's a Allwinner chip */ +#define CONFIG_SUNXI /* which is sunxi family */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_SYS_TEXT_BASE 0x4A000000 + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ + +/* Serial & console */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +/* ns16550 reg in the low bits of cpu reg */ +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (24000000) +#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE +#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE +#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE + +/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x0 +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32K */ + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* A10-EVB has 1 banks of DRAM, we use only one in U-Boot */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SETEXPR + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* + * Size of malloc() pool + * 1MB = 0x100000, 0x100000 = 1024 * 1024 + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) + +/* Flat Device Tree (FDT/DT) support */ +#define CONFIG_OF_LIBFDT +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_CMD_ECHO +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + (256 << 20)) +#define CONFIG_SYS_LOAD_ADDR 0x50000000 /* default load address */ + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KB */ + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KB */ +#define CONFIG_IDENT_STRING " Allwinner Technology " + +#define CONFIG_ENV_IS_NOWHERE /* No storage defined yet */ + +#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512)KB */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128KB */ + +#define CONFIG_BOOTCOMMAND \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "env import -t ${scriptaddr} ${filesize};" \ + "fi;" \ + "if test -n ${uenvcmd}; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loadbootscr; then "\ + "echo Jumping to ${bootscr};" \ + "source ${scriptaddr};" \ + "fi;" \ + "run setargs boot_mmc;" \ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttyS0,115200\0" \ + "root=/dev/mmcblk0p2 rootwait\0" \ + "panicarg=panic=10\0" \ + "extraargs=\0" \ + "loglevel=8\0" \ + "scriptaddr=0x44000000\0" \ + "setargs=setenv bootargs console=${console} root=${root}" \ + " loglevel=${loglevel} ${panicarg} ${extraargs}\0" \ + "kernel=uImage\0" \ + "bootenv=uEnv.txt\0" \ + "bootscr=boot.scr\0" \ + "loadbootscr=fatload mmc 0 $scriptaddr ${bootscr} ||" \ + " ext2load mmc 0 $scriptaddr ${bootscr} ||" \ + " ext2load mmc 0 $scriptaddr boot/${bootscr}\0" \ + "loadbootenv=fatload mmc 0 $scriptaddr ${bootenv} ||" \ + " ext2load mmc 0 $scriptaddr ${bootenv} ||" \ + " ext2load mmc 0 $scriptaddr boot/${bootenv}\0" \ + "boot_mmc=fatload mmc 0 0x43000000 script.bin &&" \ + " fatload mmc 0 0x48000000 ${kernel} &&" \ + " bootm 0x48000000\0" + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_SYS_BOOT_GET_CMDLINE +#define CONFIG_AUTO_COMPLETE + +#include <config_cmd_default.h> + +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT /* with this we can access fat bootfs */ +#define CONFIG_FAT_WRITE /* enable write access */ +#define CONFIG_CMD_EXT2 /* with this we can access ext2 bootfs */ +#define CONFIG_CMD_EXT4 /* with this we can access ext4 bootfs */ +#define CONFIG_CMD_ZFS /* with this we can access ZFS bootfs */ + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +#endif /* __CONFIG_H */
Hi Henrik,
I have few comments bellow.
On Sun, Nov 25, 2012 at 12:37:30PM +0100, Henrik Nordström wrote:
This adds support for the Allwinner A10/A13 SoC's. Additionally board support for the dev-boards sun4i/sun5i is added.
Signed-off-by: Tom Cubie tangliang@allwinnertech.com Signed-off-by: Henrik Nordström henrik@henriknordstrom.net Signed-off-by: Stefan Roese sr@denx.de
MAINTAINERS | 13 ++ arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/sunxi/Makefile | 51 +++++++ arch/arm/cpu/armv7/sunxi/board.c | 77 +++++++++++ arch/arm/cpu/armv7/sunxi/clock.c | 57 ++++++++ arch/arm/cpu/armv7/sunxi/pinmux.c | 61 +++++++++ arch/arm/cpu/armv7/sunxi/reset.S | 39 ++++++ arch/arm/cpu/armv7/sunxi/timer.c | 117 +++++++++++++++++ arch/arm/include/asm/arch-sunxi/clock.h | 179 +++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/cpu.h | 146 +++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/dram.h | 114 ++++++++++++++++ arch/arm/include/asm/arch-sunxi/gpio.h | 164 +++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/sys_proto.h | 32 +++++ arch/arm/include/asm/arch-sunxi/timer.h | 102 ++++++++++++++ board/sunxi/Makefile | 46 +++++++ board/sunxi/board.c | 57 ++++++++ boards.cfg | 4 + include/configs/sun4i.h | 47 +++++++ include/configs/sun5i.h | 56 ++++++++ include/configs/sunxi-common.h | 189 +++++++++++++++++++++++++++ 20 files changed, 1552 insertions(+), 1 deletions(-) create mode 100644 arch/arm/cpu/armv7/sunxi/Makefile create mode 100644 arch/arm/cpu/armv7/sunxi/board.c create mode 100644 arch/arm/cpu/armv7/sunxi/clock.c create mode 100644 arch/arm/cpu/armv7/sunxi/pinmux.c create mode 100644 arch/arm/cpu/armv7/sunxi/reset.S create mode 100644 arch/arm/cpu/armv7/sunxi/timer.c create mode 100644 arch/arm/include/asm/arch-sunxi/clock.h create mode 100644 arch/arm/include/asm/arch-sunxi/cpu.h create mode 100644 arch/arm/include/asm/arch-sunxi/dram.h create mode 100644 arch/arm/include/asm/arch-sunxi/gpio.h create mode 100644 arch/arm/include/asm/arch-sunxi/sys_proto.h create mode 100644 arch/arm/include/asm/arch-sunxi/timer.h create mode 100644 board/sunxi/Makefile create mode 100644 board/sunxi/board.c create mode 100644 include/configs/sun4i.h create mode 100644 include/configs/sun5i.h create mode 100644 include/configs/sunxi-common.h
diff --git a/MAINTAINERS b/MAINTAINERS index c430574..80c1bd7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -331,6 +331,19 @@ Reinhard Meyer reinhard.meyer@emk-elektronik.de TOP5200 MPC5200 TOP9000 ARM926EJS (AT91SAM9xxx SoC)
+Henrik Nordstrom henrik@henriknordstrom.net
- A13_OLINUXINO ARM V7 (Allwinner A13 SoC)
- A13_MID ARM V7 (Allwinner A13 SoC)
- CUBIEBOARD ARM V7 (Allwinner A10 SoC)
- CUBIEBOARD_512 ARM V7 (Allwinner A10 SoC)
- HACKBERRY ARM V7 (Allwinner A10 SoC)
- MELE_A1000 ARM V7 (Allwinner A10 SoC)
- MINI-X ARM V7 (Allwinner A10 SoC)
- SUN4I ARM V7 (Allwinner A10 SoC)
- SUN4I_SDCON ARM V7 (Allwinner A10 SoC)
- SUN5I ARM V7 (Allwinner A13 SoC)
- SUN5I_SDCON ARM V7 (Allwinner A13 SoC)
Kyle Moffett Kyle.D.Moffett@boeing.com
HWW1U1A P2020 diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index da1b5e8..56f51b5 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -33,7 +33,7 @@ COBJS += cpu.o COBJS += syslib.o COBJS += cmd_boot.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20),) +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20)$(CONFIG_SUNXI),) SOBJS += lowlevel_init.o endif
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile new file mode 100644 index 0000000..cbe1015 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2003
I don't know about the dates. It's 2012 now... Same goes for all other files.
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +#
+include $(TOPDIR)/config.mk
+LIB = $(obj)lib$(SOC).o
+SOBJS += reset.o
+COBJS += timer.o +COBJS += dram.o +COBJS += board.o +COBJS += clock.o +COBJS += pinmux.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
+all: $(obj).depend $(LIB)
+$(LIB): $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
+#########################################################################
+# defines $(obj).depend target +include $(SRCTREE)/rules.mk
+sinclude $(obj).depend
+######################################################################### diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c new file mode 100644 index 0000000..652c19d --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -0,0 +1,77 @@ +/*
- (C) Copyright 2007-2011
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- Some init for sunxi platform.
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/io.h> +#include <serial.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/timer.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h>
+int gpio_init(void) +{ +#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) +#ifdef CONFIG_SUN4I
- /* disable GPB22,23 as uart0 tx,rx to avoid conflict */
- gpio_direction_input(SUNXI_GPB(22));
- gpio_direction_input(SUNXI_GPB(23));
+#endif
- sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX);
- sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN4I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I)
- sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART0_TX);
- sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART0_RX);
+#else +#error Unsupported console port number. Please fix pin mux settings in board.c +#endif
- return 0;
+}
+/* do some early init */ +void s_init(void) +{
- clock_init();
- gpio_init();
+}
+void reset_cpu(ulong addr) +{
- sunxi_reset();
+}
+#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
+} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c new file mode 100644 index 0000000..424acfc --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock.c @@ -0,0 +1,57 @@ +/*
- (C) Copyright 2007-2012
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h>
+int clock_init(void) +{
- struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;- /* uart clock source is apb1 */
- sr32(&ccm->apb1_clk_div_cfg, 24, 2, APB1_CLK_SRC_OSC24M);
- sr32(&ccm->apb1_clk_div_cfg, 16, 2, APB1_FACTOR_N);
- sr32(&ccm->apb1_clk_div_cfg, 0, 5, APB1_FACTOR_M);
- /* open the clock for uart */
- sr32(&ccm->apb1_gate, 16 + CONFIG_CONS_INDEX - 1, 1, CLK_GATE_OPEN);
- return 0;
+}
+/* Return PLL5 frequency in Hz
- Note: Assumes PLL5 reference is 24MHz clock
- */
+unsigned int clock_get_pll5(void) +{
- struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;- uint32_t rval = readl(&ccm->pll5_cfg);
- int n = (rval >> 8) & 0x1f;
- int k = ((rval >> 4) & 3) + 1;
- int p = 1 << ((rval >> 16) & 3);
- return 24000000 * n * k / p;
+} diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c b/arch/arm/cpu/armv7/sunxi/pinmux.c new file mode 100644 index 0000000..77e1d90 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/pinmux.c @@ -0,0 +1,61 @@ +/*
- (C) Copyright 2007-2011
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/io.h> +#include <asm/arch/gpio.h>
+int sunxi_gpio_set_cfgpin(u32 pin, u32 val) +{
- u32 cfg;
- u32 bank = GPIO_BANK(pin);
- u32 index = GPIO_CFG_INDEX(pin);
- u32 offset = GPIO_CFG_OFFSET(pin);
- struct sunxi_gpio *pio =
&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank];- cfg = readl(&pio->cfg[0] + index);
- cfg &= ~(0xf << offset);
- cfg |= val << offset;
- writel(cfg, &pio->cfg[0] + index);
- return 0;
+}
+int sunxi_gpio_get_cfgpin(u32 pin) +{
- u32 cfg;
- u32 bank = GPIO_BANK(pin);
- u32 index = GPIO_CFG_INDEX(pin);
- u32 offset = GPIO_CFG_OFFSET(pin);
- struct sunxi_gpio *pio =
&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank];- cfg = readl(&pio->cfg[0] + index);
- cfg >>= offset;
- return cfg & 0xf;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/reset.S b/arch/arm/cpu/armv7/sunxi/reset.S new file mode 100644 index 0000000..36714e7 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/reset.S @@ -0,0 +1,39 @@ +/*
- (C) Copyright 2007-2011
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- Configuration settings for the Allwinner A10-evb board.
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <asm/arch/cpu.h>
+#define SUNXI_WDOG_CTL 0x01C20C90 +#define SUNXI_WDOG_MODE 0x01C20C94
+.globl sunxi_reset +sunxi_reset:
- ldr r1, =SUNXI_WDOG_MODE
- mov r3, #0x3
- str r3, [r1]
- mov r0, r0
+_loop_forever:
- b _loop_forever
diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/cpu/armv7/sunxi/timer.c new file mode 100644 index 0000000..e19df09 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/timer.c @@ -0,0 +1,117 @@ +/*
- (C) Copyright 2007-2011
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/io.h> +#include <asm/arch/timer.h>
+DECLARE_GLOBAL_DATA_PTR;
+#define TIMER_MODE (0 << 7) /* continuous mode */ +#define TIMER_DIV (0 << 4) /* pre scale 1 */ +#define TIMER_SRC (1 << 2) /* osc24m */ +#define TIMER_RELOAD (1 << 1) /* reload internal value */ +#define TIMER_EN (1 << 0) /* enable timer */
+#define TIMER_CLOCK (24 * 1000 * 1000) +#define COUNT_TO_USEC(x) ((x) / 24) +#define USEC_TO_COUNT(x) ((x) * 24) +#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) +#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ)
+#define TIMER_LOAD_VAL 0xffffffff
+#define TIMER_NUM 0 /* we use timer 0 */
+static struct sunxi_timer *timer_base =
- &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->timer[TIMER_NUM];
+/* macro to read the 32 bit timer: since it decrements, we invert read value */ +#define READ_TIMER() (~readl(&timer_base->val))
+/* init timer register */ +int timer_init(void) +{
- writel(TIMER_LOAD_VAL, &timer_base->inter);
- writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN,
&timer_base->ctl);- return 0;
+}
+/* timer without interrupts */ +ulong get_timer(ulong base) +{
- return get_timer_masked() - base;
+}
+ulong get_timer_masked(void) +{
- /* current tick value */
- ulong now = TICKS_TO_HZ(READ_TIMER());
- if (now >= gd->lastinc) /* normal (non rollover) */
gd->tbl += (now - gd->lastinc);- else /* rollover */
gd->tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) - gd->lastinc) + now;- gd->lastinc = now;
- return gd->tbl;
+}
+/* delay x useconds */ +void __udelay(unsigned long usec) +{
- long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
- ulong now, last = READ_TIMER();
- while (tmo > 0) {
now = READ_TIMER();if (now > last) /* normal (non rollover) */tmo -= now - last;else /* rollover */tmo -= TIMER_LOAD_VAL - last + now;last = now;- }
+}
+/*
- This function is derived from PowerPC code (read timebase as long long).
- On ARM it just returns the timer value.
- */
+unsigned long long get_ticks(void) +{
- return get_timer(0);
+}
+/*
- This function is derived from PowerPC code (timebase clock frequency).
- On ARM it returns the number of timer ticks per second.
- */
+ulong get_tbclk(void) +{
- ulong tbclk;
- tbclk = CONFIG_SYS_HZ;
- return tbclk;
+} diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h new file mode 100644 index 0000000..863e59e --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -0,0 +1,179 @@ +/*
- (C) Copyright 2007-2011
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef _SUNXI_CLOCK_H +#define _SUNXI_CLOCK_H
+/* clock control module regs definition */
+struct sunxi_ccm_reg {
- u32 pll1_cfg; /* 0x00 pll1 control */
- u32 pll1_tun; /* 0x04 pll1 tuning */
- u32 pll2_cfg; /* 0x08 pll2 control */
- u32 pll2_tun; /* 0x0c pll2 tuning */
- u32 pll3_cfg; /* 0x10 pll3 control */
- u8 res0[0x4];
- u32 pll4_cfg; /* 0x18 pll4 control */
- u8 res1[0x4];
- u32 pll5_cfg; /* 0x20 pll5 control */
- u32 pll5_tun; /* 0x24 pll5 tuning */
- u32 pll6_cfg; /* 0x28 pll6 control */
- u32 pll6_tun; /* 0x2c pll6 tuning */
- u32 pll7_cfg; /* 0x30 pll7 control */
- u32 pll1_tun2; /* 0x34 pll5 tuning2 */
- u8 res2[0x4];
- u32 pll5_tun2; /* 0x3c pll5 tuning2 */
- u8 res3[0xc];
- u32 pll_lock_dbg; /* 0x4c pll lock time debug */
- u32 osc24m_cfg; /* 0x50 osc24m control */
- u32 cpu_ahb_apb0_cfg; /* 0x54 cpu,ahb and apb0 divide ratio */
- u32 apb1_clk_div_cfg; /* 0x58 apb1 clock dividor */
- u32 axi_gate; /* 0x5c axi module clock gating */
- u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */
- u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */
- u32 apb0_gate; /* 0x68 apb0 module clock gating */
- u32 apb1_gate; /* 0x6c apb1 module clock gating */
- u8 res4[0x10];
- u32 nand_sclk_cfg; /* 0x80 nand sub clock control */
- u32 ms_sclk_cfg; /* 0x84 memory stick sub clock control */
- u32 sd0_clk_cfg; /* 0x88 sd0 clock control */
- u32 sd1_clk_cfg; /* 0x8c sd1 clock control */
- u32 sd2_clk_cfg; /* 0x90 sd2 clock control */
- u32 sd3_clk_cfg; /* 0x94 sd3 clock control */
- u32 ts_clk_cfg; /* 0x98 transport stream clock control */
- u32 ss_clk_cfg; /* 0x9c */
- u32 spi0_clk_cfg; /* 0xa0 */
- u32 spi1_clk_cfg; /* 0xa4 */
- u32 spi2_clk_cfg; /* 0xa8 */
- u32 pata_clk_cfg; /* 0xac */
- u32 ir0_clk_cfg; /* 0xb0 */
- u32 ir1_clk_cfg; /* 0xb4 */
- u32 iis_clk_cfg; /* 0xb8 */
- u32 ac97_clk_cfg; /* 0xbc */
- u32 spdif_clk_cfg; /* 0xc0 */
- u32 keypad_clk_cfg; /* 0xc4 */
- u32 sata_clk_cfg; /* 0xc8 */
- u32 usb_clk_cfg; /* 0xcc */
- u32 gps_clk_cfg; /* 0xd0 */
- u32 spi3_clk_cfg; /* 0xd4 */
- u8 res5[0x28];
- u32 dram_clk_cfg; /* 0x100 */
- u32 be0_clk_cfg; /* 0x104 */
- u32 be1_clk_cfg; /* 0x108 */
- u32 fe0_clk_cfg; /* 0x10c */
- u32 fe1_clk_cfg; /* 0x110 */
- u32 mp_clk_cfg; /* 0x114 */
- u32 lcd0_ch0_clk_cfg; /* 0x118 */
- u32 lcd1_ch0_clk_cfg; /* 0x11c */
- u32 csi_isp_clk_cfg; /* 0x120 */
- u8 res6[0x4];
- u32 tvd_clk_reg; /* 0x128 */
- u32 lcd0_ch1_clk_cfg; /* 0x12c */
- u32 lcd1_ch1_clk_cfg; /* 0x130 */
- u32 csi0_clk_cfg; /* 0x134 */
- u32 csi1_clk_cfg; /* 0x138 */
- u32 ve_clk_cfg; /* 0x13c */
- u32 audio_codec_clk_cfg; /* 0x140 */
- u32 avs_clk_cfg; /* 0x144 */
- u32 ace_clk_cfg; /* 0x148 */
- u32 lvds_clk_cfg; /* 0x14c */
- u32 hdmi_clk_cfg; /* 0x150 */
- u32 mali_clk_cfg; /* 0x154 */
- u8 res7[0x4];
- u32 mbus_clk_cfg; /* 0x15c */
+};
+/* apb1 bit field */ +#define APB1_CLK_SRC_OSC24M 0 +#define APB1_FACTOR_M 0 +#define APB1_FACTOR_N 0
+/* clock divide */ +#define CPU_CLK_SRC_OSC24M 1 +#define CPU_CLK_SRC_PLL1 2 +#define AXI_DIV_1 0 +#define AXI_DIV_2 1 +#define AXI_DIV_3 2 +#define AXI_DIV_4 3 +#define AHB_DIV_1 0 +#define AHB_DIV_2 1 +#define AHB_DIV_4 2 +#define AHB_DIV_8 3 +#define APB0_DIV_1 0 +#define APB0_DIV_2 1 +#define APB0_DIV_4 2 +#define APB0_DIV_8 3
+#ifdef CONFIG_SUN5I +#define AHB_CLK_SRC_AXI 0 +#endif
+#define CLK_GATE_OPEN 0x1 +#define CLK_GATE_CLOSE 0x0
+/* nand clock */ +#define NAND_CLK_SRC_OSC24 0 +#define NAND_CLK_DIV_N 0 +#define NAND_CLK_DIV_M 0
+/* gps clock */ +#define GPS_SCLK_GATING_OFF 0 +#define GPS_RESET 0
+/* ahb clock gate bit offset */ +#define AHB_GATE_OFFSET_GPS 26 +#define AHB_GATE_OFFSET_SATA 25 +#define AHB_GATE_OFFSET_PATA 24 +#define AHB_GATE_OFFSET_SPI3 23 +#define AHB_GATE_OFFSET_SPI2 22 +#define AHB_GATE_OFFSET_SPI1 21 +#define AHB_GATE_OFFSET_SPI0 20 +#define AHB_GATE_OFFSET_TS0 18 +#define AHB_GATE_OFFSET_EMAC 17 +#define AHB_GATE_OFFSET_ACE 16 +#define AHB_GATE_OFFSET_DLL 15 +#define AHB_GATE_OFFSET_SDRAM 14 +#define AHB_GATE_OFFSET_NAND 13 +#define AHB_GATE_OFFSET_MS 12 +#define AHB_GATE_OFFSET_MMC3 11 +#define AHB_GATE_OFFSET_MMC2 10 +#define AHB_GATE_OFFSET_MMC1 9 +#define AHB_GATE_OFFSET_MMC0 8 +#define AHB_GATE_OFFSET_BIST 7 +#define AHB_GATE_OFFSET_DMA 6 +#define AHB_GATE_OFFSET_SS 5 +#define AHB_GATE_OFFSET_USB_OHCI1 4 +#define AHB_GATE_OFFSET_USB_EHCI1 3 +#define AHB_GATE_OFFSET_USB_OHCI0 2 +#define AHB_GATE_OFFSET_USB_EHCI0 1 +#define AHB_GATE_OFFSET_USB 0
+#ifndef __ASSEMBLY__ +int clock_init(void); +int clock_twi_onoff(int port, int state); +void clock_set_pll1(int mhz); +unsigned int clock_get_pll5(void); +#endif
+#endif /* _SUNXI_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h new file mode 100644 index 0000000..6c8eaeb --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -0,0 +1,146 @@ +/*
- (C) Copyright 2007-2011
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef _SUNXI_CPU_H +#define _SUNXI_CPU_H
+#define SUNXI_SRAM_A1_BASE 0x00000000 +#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16k */
+#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16k */ +#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13k */ +#define SUNXI_SRAM_A4_BASE 0x0000B400 /* 3k */ +#define SUNXI_SRAM_D_BASE 0x01C00000 +#define SUNXI_SRAM_B_BASE 0x01C00000 /* 64k(secure) */
+#define SUNXI_SRAMC_BASE 0x01C00000 +#define SUNXI_DRAMC_BASE 0x01C01000 +#define SUNXI_DMA_BASE 0x01C02000 +#define SUNXI_NFC_BASE 0x01C03000 +#define SUNXI_TS_BASE 0x01C04000 +#define SUNXI_SPI0_BASE 0x01C05000 +#define SUNXI_SPI1_BASE 0x01C06000 +#define SUNXI_MS_BASE 0x01C07000 +#define SUNXI_TVD_BASE 0x01C08000 +#define SUNXI_CSI0_BASE 0x01C09000 +#define SUNXI_TVE0_BASE 0x01C0A000 +#define SUNXI_EMAC_BASE 0x01C0B000 +#define SUNXI_LCD0_BASE 0x01C0C000 +#define SUNXI_LCD1_BASE 0x01C0D000 +#define SUNXI_VE_BASE 0x01C0E000 +#define SUNXI_MMC0_BASE 0x01C0F000 +#define SUNXI_MMC1_BASE 0x01C10000 +#define SUNXI_MMC2_BASE 0x01C11000 +#define SUNXI_MMC3_BASE 0x01C12000 +#define SUNXI_USB0_BASE 0x01C13000 +#define SUNXI_USB1_BASE 0x01C14000 +#define SUNXI_SS_BASE 0x01C15000 +#define SUNXI_HDMI_BASE 0x01C16000 +#define SUNXI_SPI2_BASE 0x01C17000 +#define SUNXI_SATA_BASE 0x01C18000 +#define SUNXI_PATA_BASE 0x01C19000 +#define SUNXI_ACE_BASE 0x01C1A000 +#define SUNXI_TVE1_BASE 0x01C1B000 +#define SUNXI_USB2_BASE 0x01C1C000 +#define SUNXI_CSI1_BASE 0x01C1D000 +#define SUNXI_TZASC_BASE 0x01C1E000 +#define SUNXI_SPI3_BASE 0x01C1F000
+#define SUNXI_CCM_BASE 0x01C20000 +#define SUNXI_INTC_BASE 0x01C20400 +#define SUNXI_PIO_BASE 0x01C20800 +#define SUNXI_TIMER_BASE 0x01C20C00 +#define SUNXI_SPDIF_BASE 0x01C21000 +#define SUNXI_AC97_BASE 0x01C21400 +#define SUNXI_IR0_BASE 0x01C21800 +#define SUNXI_IR1_BASE 0x01C21C00
+#define SUNXI_IIS_BASE 0x01C22400 +#define SUNXI_LRADC_BASE 0x01C22800 +#define SUNXI_AD_DA_BASE 0x01C22C00 +#define SUNXI_KEYPAD_BASE 0x01C23000 +#define SUNXI_TZPC_BASE 0x01C23400 +#define SUNXI_SID_BASE 0x01C23800 +#define SUNXI_SJTAG_BASE 0x01C23C00
+#define SUNXI_TP_BASE 0x01C25000 +#define SUNXI_PMU_BASE 0x01C25400
+#define SUNXI_UART0_BASE 0x01C28000 +#define SUNXI_UART1_BASE 0x01C28400 +#define SUNXI_UART2_BASE 0x01C28800 +#define SUNXI_UART3_BASE 0x01C28C00 +#define SUNXI_UART4_BASE 0x01C29000 +#define SUNXI_UART5_BASE 0x01C29400 +#define SUNXI_UART6_BASE 0x01C29800 +#define SUNXI_UART7_BASE 0x01C29C00 +#define SUNXI_PS2_0_BASE 0x01C2A000 +#define SUNXI_PS2_1_BASE 0x01C2A400
+#define SUNXI_TWI0_BASE 0x01C2AC00 +#define SUNXI_TWI1_BASE 0x01C2B000 +#define SUNXI_TWI2_BASE 0x01C2B400
+#define SUNXI_CAN_BASE 0x01C2BC00
+#define SUNXI_SCR_BASE 0x01C2C400
+#define SUNXI_GPS_BASE 0x01C30000 +#define SUNXI_MALI400_BASE 0x01C40000
+/* module sram */ +#define SUNXI_SRAM_C_BASE 0x01D00000
+#define SUNXI_DE_FE0_BASE 0x01E00000 +#define SUNXI_DE_FE1_BASE 0x01E20000 +#define SUNXI_DE_BE0_BASE 0x01E60000 +#define SUNXI_DE_BE1_BASE 0x01E40000 +#define SUNXI_MP_BASE 0x01E80000 +#define SUNXI_AVG_BASE 0x01EA0000
+/* CoreSight Debug Module */ +#define SUNXI_CSDM_BASE 0x3F500000
+#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2G */
+#define SUNXI_BROM_BASE 0xFFFF0000 /* 32K */
+#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c)
+#ifndef __ASSEMBLY__ +/* boot type */ +enum sunxi_boot_type_t {
- SUNXI_BOOT_TYPE_NULL,
- SUNXI_BOOT_TYPE_MMC0,
- SUNXI_BOOT_TYPE_NAND,
- SUNXI_BOOT_TYPE_MMC2,
- SUNXI_BOOT_TYPE_SPI
+};
+sunxi_boot_type_t get_boot_type(void); +void sunxi_board_init(void); +extern void sunxi_reset(void); +#endif /* __ASSEMBLY__ */
+#endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h new file mode 100644 index 0000000..d3c0e9f --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -0,0 +1,114 @@ +/*
- (C) Copyright 2007-2012
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Berg Xing bergxing@allwinnertech.com
- Tom Cubie tangliang@allwinnertech.com
- Sunxi platform dram register definition.
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef _SUNXI_DRAM_H +#define _SUNXI_DRAM_H
+struct sunxi_dram_reg {
- u32 ccr; /* 0x00 controller configuration register */
- u32 dcr; /* 0x04 dram configuration register */
- u32 iocr; /* 0x08 i/o configuration register */
- u32 csr; /* 0x0c controller status register */
- u32 drr; /* 0x10 dram refresh register */
- u32 tpr0; /* 0x14 dram timing parameters register 0 */
- u32 tpr1; /* 0x18 dram timing parameters register 1 */
- u32 tpr2; /* 0x1c dram timing parameters register 2 */
- u32 gdllcr; /* 0x20 global dll control register */
- u8 res0[0x28];
- u32 rslr0; /* 0x4c rank system latency register */
- u32 rslr1; /* 0x50 rank system latency register */
- u8 res1[0x8];
- u32 rdgr0; /* 0x5c rank dqs gating register */
- u32 rdgr1; /* 0x60 rank dqs gating register */
- u8 res2[0x34];
- u32 odtcr; /* 0x98 odt configuration register */
- u32 dtr0; /* 0x9c data training register 0 */
- u32 dtr1; /* 0xa0 data training register 1 */
- u32 dtar; /* 0xa4 data training address register */
- u32 zqcr0; /* 0xa8 zq control register 0 */
- u32 zqcr1; /* 0xac zq control register 1 */
- u32 zqsr; /* 0xb0 zq status register */
- u32 idcr; /* 0xb4 initializaton delay configure reg */
- u8 res3[0x138];
- u32 mr; /* 0x1f0 mode register */
- u32 emr; /* 0x1f4 extended mode register */
- u32 emr2; /* 0x1f8 extended mode register */
- u32 emr3; /* 0x1fc extended mode register */
- u32 dllctr; /* 0x200 dll control register */
- u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */
- /* 0x208 dll control register 1(byte 1) */
- /* 0x20c dll control register 2(byte 2) */
- /* 0x210 dll control register 3(byte 3) */
- /* 0x214 dll control register 4(byte 4) */
- u32 dqtr0; /* 0x218 dq timing register */
- u32 dqtr1; /* 0x21c dq timing register */
- u32 dqtr2; /* 0x220 dq timing register */
- u32 dqtr3; /* 0x224 dq timing register */
- u32 dqstr; /* 0x228 dqs timing register */
- u32 dqsbtr; /* 0x22c dqsb timing register */
- u32 mcr; /* 0x230 mode configure register */
- u8 res[0x8];
- u32 ppwrsctl; /* 0x23c pad power save control */
- u32 apr; /* 0x240 arbiter period register */
- u32 pldtr; /* 0x244 priority level data threshold reg */
- u8 res5[0x8];
- u32 hpcr[32]; /* 0x250 host port configure register */
- u8 res6[0x10];
- u32 csel; /* 0x2e0 controller select register */
+};
+struct dram_para {
- u32 clock;
- u32 type;
- u32 rank_num;
- u32 density;
- u32 io_width;
- u32 bus_width;
- u32 cas;
- u32 zq;
- u32 odt_en;
- u32 size;
- u32 tpr0;
- u32 tpr1;
- u32 tpr2;
- u32 tpr3;
- u32 tpr4;
- u32 tpr5;
- u32 emr1;
- u32 emr2;
- u32 emr3;
+};
+#define SUN5I_DRAM_MCR_DCLK_OUT_OFFSET 16 +#define SUN4I_CCM_SDRAM_DCLK_OUT_OFFSET 15
+#define DRAM_CTRL_SELECT_MAGIC 0x16237495
+int sunxi_dram_init(void); +int dramc_init(struct dram_para *para);
+#endif /* _SUNXI_DRAM_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h new file mode 100644 index 0000000..fceee6b --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -0,0 +1,164 @@ +/*
- (C) Copyright 2007-2012
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef _SUNXI_GPIO_H +#define _SUNXI_GPIO_H
+/*
- sunxi has 9 banks of gpio, they are:
- PA0 - PA17 | PB0 - PB23 | PC0 - PC24
- PD0 - PD27 | PE0 - PE31 | PF0 - PF5
- PG0 - PG9 | PH0 - PH27 | PI0 - PI12
- */
+#define SUNXI_GPIO_A 0 +#define SUNXI_GPIO_B 1 +#define SUNXI_GPIO_C 2 +#define SUNXI_GPIO_D 3 +#define SUNXI_GPIO_E 4 +#define SUNXI_GPIO_F 5 +#define SUNXI_GPIO_G 6 +#define SUNXI_GPIO_H 7 +#define SUNXI_GPIO_I 8
+struct sunxi_gpio {
- u32 cfg[4];
- u32 dat;
- u32 drv[2];
- u32 pull[2];
+};
+/* gpio interrupt control */ +struct sunxi_gpio_int {
- u32 cfg[3];
- u32 ctl;
- u32 sta;
- u32 deb; /* interrupt debounce */
+};
+struct sunxi_gpio_reg {
- struct sunxi_gpio gpio_bank[9];
- u8 res[0xbc];
- struct sunxi_gpio_int gpio_int;
+};
+#define GPIO_BANK(pin) ((pin) >> 5) +#define GPIO_NUM(pin) ((pin) & 0x1F)
+#define GPIO_CFG_INDEX(pin) (((pin) & 0x1F) >> 3) +#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1F) & 0x7) << 2)
+/* GPIO bank sizes */ +#define SUNXI_GPIO_A_NR 32 +#define SUNXI_GPIO_B_NR 32 +#define SUNXI_GPIO_C_NR 32 +#define SUNXI_GPIO_D_NR 32 +#define SUNXI_GPIO_E_NR 32 +#define SUNXI_GPIO_F_NR 32 +#define SUNXI_GPIO_G_NR 32 +#define SUNXI_GPIO_H_NR 32 +#define SUNXI_GPIO_I_NR 32
+#define SUNXI_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + 0)
+enum sunxi_gpio_number {
- SUNXI_GPIO_A_START = 0,
- SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A),
- SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B),
- SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C),
- SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D),
- SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E),
- SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
- SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
- SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
+};
+/* SUNXI GPIO number definitions */ +#define SUNXI_GPA(_nr) (SUNXI_GPIO_A_START + (_nr)) +#define SUNXI_GPB(_nr) (SUNXI_GPIO_B_START + (_nr)) +#define SUNXI_GPC(_nr) (SUNXI_GPIO_C_START + (_nr)) +#define SUNXI_GPD(_nr) (SUNXI_GPIO_D_START + (_nr)) +#define SUNXI_GPE(_nr) (SUNXI_GPIO_E_START + (_nr)) +#define SUNXI_GPF(_nr) (SUNXI_GPIO_F_START + (_nr)) +#define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr)) +#define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr)) +#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr))
+/* GPIO pin function config */ +#define SUNXI_GPIO_INPUT 0 +#define SUNXI_GPIO_OUTPUT 1
+#define SUNXI_GPA0_ERXD3 2 +#define SUNXI_GPA0_SPI1_CS0 3 +#define SUNXI_GPA0_UART2_RTS 4
+#define SUNXI_GPA1_ERXD2 2 +#define SUNXI_GPA1_SPI1_CLK 3 +#define SUNXI_GPA1_UART2_CTS 4
+#define SUNXI_GPA2_ERXD1 2 +#define SUNXI_GPA2_SPI1_MOSI 3 +#define SUNXI_GPA2_UART2_TX 4
+#define SUNXI_GPA10_UART1_TX 4 +#define SUNXI_GPA11_UART1_RX 4
+#define SUN4I_GPB22_UART0_TX 2 +#define SUN4I_GPB23_UART0_RX 2
+#define SUN5I_GPG3_UART0_TX 4 +#define SUN5I_GPG4_UART0_RX 4
+#define SUNXI_GPC2_NCLE 2 +#define SUNXI_GPC2_SPI0_CLK 3
+#define SUNXI_GPC6_NRB0 2 +#define SUNXI_GPC6_SDC2_CMD 3
+#define SUNXI_GPC7_NRB1 2 +#define SUNXI_GPC7_SDC2_CLK 3
+#define SUNXI_GPC8_NDQ0 2 +#define SUNXI_GPC8_SDC2_D0 3
+#define SUNXI_GPC9_NDQ1 2 +#define SUNXI_GPC9_SDC2_D1 3
+#define SUNXI_GPC10_NDQ2 2 +#define SUNXI_GPC10_SDC2_D2 3
+#define SUNXI_GPC11_NDQ3 2 +#define SUNXI_GPC11_SDC2_D3 3
+#define SUNXI_GPF2_SDC0_CLK 2 +#define SUNXI_GPF2_UART0_TX 4
+#define SUNXI_GPF4_SDC0_D3 2 +#define SUNXI_GPF4_UART0_RX 4
+int sunxi_gpio_set_cfgpin(u32 pin, u32 val); +int sunxi_gpio_get_cfgpin(u32 pin);
+#endif /* _SUNXI_GPIO_H */ diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h new file mode 100644 index 0000000..1e8ae5d --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -0,0 +1,32 @@ +/*
- (C) Copyright 2007-2012
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_
+void sr32(u32 *, u32, u32, u32); +void sdelay(unsigned long); +void watchdog_init(void);
+#endif diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h new file mode 100644 index 0000000..cbfec53 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -0,0 +1,102 @@ +/*
- (C) Copyright 2007-2011
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- Configuration settings for the Allwinner A10-evb board.
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef _SUNXI_TIMER_H_ +#define _SUNXI_TIMER_H_
+#ifndef __ASSEMBLY__
+/* General purpose timer */ +struct sunxi_timer {
- u32 ctl;
- u32 inter;
- u32 val;
- u8 res[4];
+};
+/* Audio video sync*/ +struct sunxi_avs {
- u32 ctl; /* 0x80 */
- u32 cnt0; /* 0x84 */
- u32 cnt1; /* 0x88 */
- u32 div; /* 0x8c */
+};
+/* 64 bit counter */ +struct sunxi_64cnt {
- u32 ctl; /* 0xa0 */
- u32 lo; /* 0xa4 */
- u32 hi; /* 0xa8 */
+};
+/* Watchdog */ +struct sunxi_wdog {
- u32 ctl; /* 0x90 */
- u32 mode; /* 0x94 */
+};
+/* Rtc */ +struct sunxi_rtc {
- u32 ctl; /* 0x100 */
- u32 yymmdd; /* 0x104 */
- u32 hhmmss; /* 0x108 */
+};
+/* Alarm */ +struct sunxi_alarm {
- u32 ddhhmmss; /* 0x10c */
- u32 hhmmss; /* 0x110 */
- u32 en; /* 0x114 */
- u32 irqen; /* 0x118 */
- u32 irqsta; /* 0x11c */
+};
+/* Timer general purpose register */ +struct sunxi_tgp {
- u32 tgpd;
+};
+struct sunxi_timer_reg {
- u32 tirqen; /* 0x00 */
- u32 tirqsta; /* 0x04 */
- u8 res1[8];
- struct sunxi_timer timer[6]; /* We have 6 timers */
- u8 res2[16];
- struct sunxi_avs avs;
- struct sunxi_wdog wdog;
- u8 res3[8];
- struct sunxi_64cnt cnt64;
- u8 res4[0x58];
- struct sunxi_rtc rtc;
- struct sunxi_alarm alarm;
- struct sunxi_tgp tgp[4];
- u8 res5[8];
- u32 cpu_cfg;
+};
+#endif /* __ASSEMBLY__ */
+#endif diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile new file mode 100644 index 0000000..43acbab --- /dev/null +++ b/board/sunxi/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +#
+include $(TOPDIR)/config.mk
+LIB := $(obj)lib$(BOARD).o
+COBJS-y := board.o
+COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS))
+all: $(LIB)
+$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
+#########################################################################
+# defines $(obj).depend target +include $(SRCTREE)/rules.mk
+sinclude $(obj).depend
+######################################################################## diff --git a/board/sunxi/board.c b/board/sunxi/board.c new file mode 100644 index 0000000..ae05953 --- /dev/null +++ b/board/sunxi/board.c @@ -0,0 +1,57 @@ +/*
- (C) Copyright 2007-2011
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- Some board init for the Allwinner A10-evb board.
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/arch/dram.h> +#include <asm/arch/clock.h> +#include <asm/arch/mmc.h> +#include <axp209.h>
+DECLARE_GLOBAL_DATA_PTR;
+/* add board specific code here */ +int board_init(void) +{
- gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100);
- return 0;
+}
+#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{
- printf("Board: %s\n", CONFIG_SYS_BOARD_NAME);
- return 0;
+} +#endif
+int dram_init(void) +{
- gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, 1 << 30);
- return 0;
+} diff --git a/boards.cfg b/boards.cfg index 7ae663c..13d1f74 100644 --- a/boards.cfg +++ b/boards.cfg @@ -288,6 +288,10 @@ whistler arm armv7:arm720t whistler nvidia colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20 u8500_href arm armv7 u8500 st-ericsson u8500 snowball arm armv7 snowball st-ericsson u8500 +sun4i arm armv7 sunxi - sunxi sun4i +sun4i_sdcon arm armv7 sunxi - sunxi sun4i:UART0_PORT_F +sun5i arm armv7 sunxi - sunxi sun5i +sun5i_sdcon arm armv7 sunxi - sunxi sun5i:UART0_PORT_F kzm9g arm armv7 kzm9g kmc rmobile armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile zynq arm armv7 zynq xilinx zynq diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h new file mode 100644 index 0000000..513f618 --- /dev/null +++ b/include/configs/sun4i.h @@ -0,0 +1,47 @@ +/*
- (C) Copyright 2012
- Henrik Nordstrom henrik@henriknordstrom.net
- Configuration settings for the Allwinner A10 (sun4i) CPU
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __CONFIG_H +#define __CONFIG_H
+/*
- Include common sunxi configuration where most the settings are
- */
+#include <configs/sunxi-common.h>
+/*
- A10 specific configuration
- */
+#define CONFIG_SUN4I /* sun4i SoC generation */
+#define CONFIG_SYS_PROMPT "sun4i#" +#define CONFIG_MACH_TYPE 4104
+/* Define this to have console redirected to SD port */ +/* #define CONFIG_UART0_PORT_F */
+#define CONFIG_CONS_INDEX 1 /* UART0 */
+#endif /* __CONFIG_H */ diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h new file mode 100644 index 0000000..dc84aba --- /dev/null +++ b/include/configs/sun5i.h @@ -0,0 +1,56 @@ +/*
- (C) Copyright 2012
- Henrik Nordstrom henrik@henriknordstrom.net
- Configuration settings for the Allwinner A13 (sun5i) CPU
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __CONFIG_H +#define __CONFIG_H
+/*
- Include common sunxi configuration where most the settings are
- */
+#include <configs/sunxi-common.h>
+/*
- High Level Configuration Options
- */
+#define CONFIG_SUN5I /* sun5i SoC generation */
+#define CONFIG_SYS_PROMPT "sun5i#" +#define CONFIG_MACH_TYPE 4138
+/* Define this to have serial channel 1 (UART0) redirected to SD port */ +/* #define CONFIG_UART0_PORT_F */
+#ifndef CONFIG_CONS_INDEX +#ifdef CONFIG_UART0_PORT_F +#define CONFIG_CONS_INDEX 1 /* UART0 on PORT_F (sdcard) */ +#else +#define CONFIG_CONS_INDEX 2 /* UART1 */ +#endif +#endif
+/* Leave ICACHE off while debugging with OpenOCD */ +#define CONFIG_SYS_ICACHE_OFF
+#endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h new file mode 100644 index 0000000..33309f3 --- /dev/null +++ b/include/configs/sunxi-common.h @@ -0,0 +1,189 @@ +/*
- (C) Copyright 2007-2011
- Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- Tom Cubie tangliang@allwinnertech.com
- Configuration settings for the Allwinner A10-evb board.
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef _SUNXI_CONFIG_H +#define _SUNXI_CONFIG_H
+/*
- High Level Configuration Options
- */
+#define CONFIG_ALLWINNER /* It's a Allwinner chip */ +#define CONFIG_SUNXI /* which is sunxi family */
Space, not tab here.
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#define CONFIG_SYS_TEXT_BASE 0x4A000000
+/*
- Display CPU and Board information
- */
+#define CONFIG_DISPLAY_BOARDINFO
+/* Clock Defines */
Why not remove this comment when there is no defines under it ?
+/* Serial & console */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +/* ns16550 reg in the low bits of cpu reg */ +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (24000000) +#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE +#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE +#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
+/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x0 +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32K */
+#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+/* A10-EVB has 1 banks of DRAM, we use only one in U-Boot */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SETEXPR
+#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING
+/*
- Size of malloc() pool
- 1MB = 0x100000, 0x100000 = 1024 * 1024
- */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+/* Flat Device Tree (FDT/DT) support */ +#define CONFIG_OF_LIBFDT +#define CONFIG_SYS_BOOTMAPSZ (16 << 20)
+/*
- Miscellaneous configurable options
- */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_CMD_ECHO +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + (256 << 20)) +#define CONFIG_SYS_LOAD_ADDR 0x50000000 /* default load address */
+#define CONFIG_SYS_HZ 1000
+/* valid baudrates */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*-----------------------------------------------------------------------
I don't think we need "----" chars above.
- Stack sizes
- The stack sizes are set up in start.S using the settings below
- */
+#define CONFIG_STACKSIZE (256 << 10) /* 256 KB */
+/*-----------------------------------------------------------------------
I don't think we need "----" chars above.
- FLASH and environment organization
- */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KB */ +#define CONFIG_IDENT_STRING " Allwinner Technology "
Why do you need trailing space ?
+#define CONFIG_ENV_IS_NOWHERE /* No storage defined yet */
+#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512)KB */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128KB */
+#define CONFIG_BOOTCOMMAND \
- "if run loadbootenv; then " \
"echo Loaded environment from ${bootenv};" \"env import -t ${scriptaddr} ${filesize};" \- "fi;" \
- "if test -n ${uenvcmd}; then " \
"echo Running uenvcmd ...;" \"run uenvcmd;" \- "fi;" \
- "if run loadbootscr; then "\
"echo Jumping to ${bootscr};" \"source ${scriptaddr};" \- "fi;" \
- "run setargs boot_mmc;" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=ttyS0,115200\0" \
- "root=/dev/mmcblk0p2 rootwait\0" \
- "panicarg=panic=10\0" \
- "extraargs=\0" \
- "loglevel=8\0" \
- "scriptaddr=0x44000000\0" \
- "setargs=setenv bootargs console=${console} root=${root}" \
" loglevel=${loglevel} ${panicarg} ${extraargs}\0" \- "kernel=uImage\0" \
- "bootenv=uEnv.txt\0" \
- "bootscr=boot.scr\0" \
- "loadbootscr=fatload mmc 0 $scriptaddr ${bootscr} ||" \
" ext2load mmc 0 $scriptaddr ${bootscr} ||" \" ext2load mmc 0 $scriptaddr boot/${bootscr}\0" \- "loadbootenv=fatload mmc 0 $scriptaddr ${bootenv} ||" \
" ext2load mmc 0 $scriptaddr ${bootenv} ||" \" ext2load mmc 0 $scriptaddr boot/${bootenv}\0" \- "boot_mmc=fatload mmc 0 0x43000000 script.bin &&" \
" fatload mmc 0 0x48000000 ${kernel} &&" \" bootm 0x48000000\0"+#define CONFIG_BOOTDELAY 3 +#define CONFIG_SYS_BOOT_GET_CMDLINE +#define CONFIG_AUTO_COMPLETE
+#include <config_cmd_default.h>
+#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT /* with this we can access fat bootfs */ +#define CONFIG_FAT_WRITE /* enable write access */ +#define CONFIG_CMD_EXT2 /* with this we can access ext2 bootfs */ +#define CONFIG_CMD_EXT4 /* with this we can access ext4 bootfs */ +#define CONFIG_CMD_ZFS /* with this we can access ZFS bootfs */
+#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS
+#endif /* __CONFIG_H */
Luka
sön 2012-11-25 klockan 13:23 +0100 skrev Luka Perkov:
Hi Henrik,
I have few comments bellow.
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
+# (C) Copyright 2000-2003
I don't know about the dates. It's 2012 now... Same goes for all other files.
Heh.. Not sure which board that was copied from.
Not sure what to set as copyright here. Can't say there have been any significant contributions by anyone in this file, but have updated the year to 2011-2012 to match current use.
Reviewing the others to see if copyright should be bumped, but some are really published in 2011 and have only received non-copyrightable cleanups after.
There is some doubt on the earlier span of the copyright on Allwinner code, quite likely many are originally from 2011 and not 2007-2011 as their copyright template says, but not in a position to tell for sure.
+#define CONFIG_SUNXI /* which is sunxi family */
Space, not tab here.
Fixed.
+/* Clock Defines */
Why not remove this comment when there is no defines under it ?
Removed.
+/*-----------------------------------------------------------------------
I don't think we need "----" chars above.
Fixed.
+/*-----------------------------------------------------------------------
I don't think we need "----" chars above.
Fixed.
+#define CONFIG_IDENT_STRING " Allwinner Technology "
Why do you need trailing space ?
We don't. Fixed.
Revised patch coming shortly.
Regards Henrik
Dear Henrik Nordström,
In message 1353848939.28559.13.camel@home.hno.se you wrote:
+# (C) Copyright 2000-2003
I don't know about the dates. It's 2012 now... Same goes for all other files.
Heh.. Not sure which board that was copied from.
Not sure what to set as copyright here. Can't say there have been any significant contributions by anyone in this file, but have updated the year to 2011-2012 to match current use.
You have changed a Copyright entry that was attributed to me?
Who exactly gave you the right to do that?
Best regards,
Wolfgang Denk
sön 2012-11-25 klockan 20:55 +0100 skrev Wolfgang Denk:
Dear Henrik Nordström,
In message 1353848939.28559.13.camel@home.hno.se you wrote:
+# (C) Copyright 2000-2003
I don't know about the dates. It's 2012 now... Same goes for all other files.
Heh.. Not sure which board that was copied from.
Not sure what to set as copyright here. Can't say there have been any significant contributions by anyone in this file, but have updated the year to 2011-2012 to match current use.
You have changed a Copyright entry that was attributed to me?
Who exactly gave you the right to do that?
We copied one of your Makefiles as template. There is still some generic board Makefile lines left ofcourse. Same as is used on every board.
The intention here was to give you the copyright to the changed file as it's more part of the build system than any board specifics. I presonally do not consider the board specific additions as copyrightable.
You want me to keep your old copyright from 2003 and add my own?
Or only keep your old copyright from 2003?
Regards Henrik
Dear Henrik Nordström,
In message 1353891927.6436.16.camel@home.hno.se you wrote:
You have changed a Copyright entry that was attributed to me?
Who exactly gave you the right to do that?
...
You want me to keep your old copyright from 2003 and add my own?
Correct. You must never meddle with sombody elses copyright entries. But, for any significant additions, you can add your own.
Best regards,
Wolfgang Denk
Dear Luka Perkov,
In message 20121125122328-24964@mutt-kz you wrote:
I have few comments bellow.
OK, but it is definitely NOT necessary to quote nearly 2000 lines of the original patch, right?
Please restrict quoting to the minimum needed to provide context.
Thanks.
Best regards,
Wolfgang Denk
Dear Henrik Nordström,
This adds support for the Allwinner A10/A13 SoC's. Additionally board support for the dev-boards sun4i/sun5i is added.
Signed-off-by: Tom Cubie tangliang@allwinnertech.com Signed-off-by: Henrik Nordström henrik@henriknordstrom.net Signed-off-by: Stefan Roese sr@denx.de
[..]
+Henrik Nordstrom henrik@henriknordstrom.net
- A13_OLINUXINO ARM V7 (Allwinner A13 SoC)
- A13_MID ARM V7 (Allwinner A13 SoC)
- CUBIEBOARD ARM V7 (Allwinner A10 SoC)
- CUBIEBOARD_512 ARM V7 (Allwinner A10 SoC)
- HACKBERRY ARM V7 (Allwinner A10 SoC)
- MELE_A1000 ARM V7 (Allwinner A10 SoC)
- MINI-X ARM V7 (Allwinner A10 SoC)
- SUN4I ARM V7 (Allwinner A10 SoC)
- SUN4I_SDCON ARM V7 (Allwinner A10 SoC)
- SUN5I ARM V7 (Allwinner A13 SoC)
- SUN5I_SDCON ARM V7 (Allwinner A13 SoC)
You're not adding these boards here yet ...
Kyle Moffett Kyle.D.Moffett@boeing.com
HWW1U1A P2020
[...]
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile new file mode 100644 index 0000000..cbe1015 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/Makefile
[...]
+include $(TOPDIR)/config.mk
+LIB = $(obj)lib$(SOC).o
+SOBJS += reset.o
+COBJS += timer.o +COBJS += dram.o +COBJS += board.o +COBJS += clock.o +COBJS += pinmux.o
COBJS = x.o y.o z.o works just fine
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
+all: $(obj).depend $(LIB)
+$(LIB): $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
[...]
+#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
Why don't you enable them both? What if someone fiddled with them prior to reset?
+} +#endif
[...]
- cfg = readl(&pio->cfg[0] + index);
- cfg &= ~(0xf << offset);
- cfg |= val << offset;
- writel(cfg, &pio->cfg[0] + index);
clrsetbits_le32()
- return 0;
+}
+int sunxi_gpio_get_cfgpin(u32 pin) +{
- u32 cfg;
- u32 bank = GPIO_BANK(pin);
- u32 index = GPIO_CFG_INDEX(pin);
- u32 offset = GPIO_CFG_OFFSET(pin);
- struct sunxi_gpio *pio =
&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank];- cfg = readl(&pio->cfg[0] + index);
- cfg >>= offset;
I think you want to put this into drivers/gpio, no?
- return cfg & 0xf;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/reset.S b/arch/arm/cpu/armv7/sunxi/reset.S new file mode 100644 index 0000000..36714e7 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/reset.S
[...]
+#include <asm/arch/cpu.h>
+#define SUNXI_WDOG_CTL 0x01C20C90 +#define SUNXI_WDOG_MODE 0x01C20C94
+.globl sunxi_reset +sunxi_reset:
- ldr r1, =SUNXI_WDOG_MODE
- mov r3, #0x3
- str r3, [r1]
- mov r0, r0
+_loop_forever:
- b _loop_forever
Put this into proper C code.
diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/cpu/armv7/sunxi/timer.c new file mode 100644 index 0000000..e19df09 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/timer.c @@ -0,0 +1,117 @@
[...]
+/* delay x useconds */
proper kerneldoc all around won't hurt.
+void __udelay(unsigned long usec) +{
- long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
- ulong now, last = READ_TIMER();
- while (tmo > 0) {
now = READ_TIMER();if (now > last) /* normal (non rollover) */tmo -= now - last;else /* rollover */tmo -= TIMER_LOAD_VAL - last + now;last = now;- }
+}
+/*
- This function is derived from PowerPC code (read timebase as long
long). + * On ARM it just returns the timer value.
- */
+unsigned long long get_ticks(void) +{
- return get_timer(0);
+}
[...]
sön 2012-11-25 klockan 19:06 +0100 skrev Marek Vasut:
+COBJS += timer.o +COBJS += dram.o +COBJS += board.o +COBJS += clock.o +COBJS += pinmux.o
COBJS = x.o y.o z.o works just fine
Does it matter?
+= is easier to deal with when adding/removing files.
+void enable_caches(void) +{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
Why don't you enable them both? What if someone fiddled with them prior to reset?
Because as the comment says, u-boot already enables I-cache in armv7 start.S.
+} +#endif
[...]
- cfg = readl(&pio->cfg[0] + index);
- cfg &= ~(0xf << offset);
- cfg |= val << offset;
- writel(cfg, &pio->cfg[0] + index);
clrsetbits_le32()
Yes. Need to fix those in many places. Will do a full review.
- return 0;
+}
+int sunxi_gpio_get_cfgpin(u32 pin) +{
- u32 cfg;
- u32 bank = GPIO_BANK(pin);
- u32 index = GPIO_CFG_INDEX(pin);
- u32 offset = GPIO_CFG_OFFSET(pin);
- struct sunxi_gpio *pio =
&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank];- cfg = readl(&pio->cfg[0] + index);
- cfg >>= offset;
I think you want to put this into drivers/gpio, no?
Why? It is accessing the pinmux setting of the pin, not GPIO value.
May want to rename the whole family of functions to _pinmux_
+++ b/arch/arm/cpu/armv7/sunxi/reset.S
Put this into proper C code.
Agreed. Inherited it as asm but there is no need for asm here. Will replace by parts from the watchdog code, which also sets the register proper.
diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/cpu/armv7/sunxi/timer.c new file mode 100644 index 0000000..e19df09 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/timer.c @@ -0,0 +1,117 @@
[...]
+/* delay x useconds */
proper kerneldoc all around won't hurt.
+void __udelay(unsigned long usec)
It's the same level of documentation or better as used pretty much everywhere else. Most don't have a comment at all here.
Any example of the level of documentation you'd like to see?
Regards Henrik
Dear Henrik Nordström,
[...]
+/* delay x useconds */
proper kerneldoc all around won't hurt.
+void __udelay(unsigned long usec)
It's the same level of documentation or better as used pretty much everywhere else. Most don't have a comment at all here.
Any example of the level of documentation you'd like to see?
See here http://www.denx.de/wiki/U-Boot/CodingStyle
Best regards, Marek Vasut
Dear Henrik Nordström,
In message 1353889294.28559.103.camel@home.hno.se you wrote:
sön 2012-11-25 klockan 19:06 +0100 skrev Marek Vasut:
+COBJS += timer.o +COBJS += dram.o +COBJS += board.o +COBJS += clock.o +COBJS += pinmux.o
COBJS = x.o y.o z.o works just fine
Does it matter?
+= is easier to deal with when adding/removing files.
Please always sort such lists.
Best regards,
Wolfgang Denk
Dear Henrik Nordström,
In message 1353843450.17518.13.camel@home.hno.se you wrote:
This adds support for the Allwinner A10/A13 SoC's. Additionally board support for the dev-boards sun4i/sun5i is added.
Signed-off-by: Tom Cubie tangliang@allwinnertech.com Signed-off-by: Henrik Nordström henrik@henriknordstrom.net Signed-off-by: Stefan Roese sr@denx.de
Where exactly is Stefan's SoB coming from? I don't think I have seen this here on the list before?
Best regards,
Wolfgang Denk
sön 2012-11-25 klockan 20:33 +0100 skrev Wolfgang Denk:
Dear Henrik Nordström,
In message 1353843450.17518.13.camel@home.hno.se you wrote:
This adds support for the Allwinner A10/A13 SoC's. Additionally board support for the dev-boards sun4i/sun5i is added.
Signed-off-by: Tom Cubie tangliang@allwinnertech.com Signed-off-by: Henrik Nordström henrik@henriknordstrom.net Signed-off-by: Stefan Roese sr@denx.de
Where exactly is Stefan's SoB coming from? I don't think I have seen this here on the list before?
He has been helping off-list to clean up the worst things and adding ethernet support and adding Signed-off-by in the process.
Regards Henrik
On 11/26/2012 12:53 AM, Henrik Nordström wrote:
sön 2012-11-25 klockan 20:33 +0100 skrev Wolfgang Denk:
Dear Henrik Nordström,
In message 1353843450.17518.13.camel@home.hno.se you wrote:
This adds support for the Allwinner A10/A13 SoC's. Additionally board support for the dev-boards sun4i/sun5i is added.
Signed-off-by: Tom Cubie tangliang@allwinnertech.com Signed-off-by: Henrik Nordström henrik@henriknordstrom.net Signed-off-by: Stefan Roese sr@denx.de
Where exactly is Stefan's SoB coming from? I don't think I have seen this here on the list before?
He has been helping off-list to clean up the worst things and adding ethernet support and adding Signed-off-by in the process.
Yes. But I would have liked to have a "final" review before submission to this list. Sorry, I have missed saying this explicitly.
Thanks, Stefan
Dear Henrik Nordström,
In message 1353843450.17518.13.camel@home.hno.se you wrote:
This adds support for the Allwinner A10/A13 SoC's. Additionally board support for the dev-boards sun4i/sun5i is added.
...
+/* Return PLL5 frequency in Hz
- Note: Assumes PLL5 reference is 24MHz clock
- */
Incorrect multiline comment style. Please fix globally.
diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h new file mode 100644 index 0000000..513f618
...
+#define CONFIG_MACH_TYPE 4104
NAK.
Please use value from mach-types.h ; if needed, ask for an update.
diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h new file mode 100644 index 0000000..dc84aba
...
+#define CONFIG_MACH_TYPE 4138
Ditto.
Best regards,
Wolfgang Denk
participants (5)
-
Henrik Nordström -
Luka Perkov -
Marek Vasut -
Stefan Roese -
Wolfgang Denk