[PATCH 1/3 v3] riscv: Remove OF_PRIOR_STAGE from RISC-V boards
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boot loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics.
On RISC-V some of the platforms pick up the DTB from a1 and copy it in their private gd_t. Apart from that they copy it to prior_stage_fdt_address, if the Kconfig option is selected, which is unnecessary.
So let's switch the config option for those boards to OF_BOARD and define the required board_fdt_blob_setup() for them.
Signed-off-by: Ilias Apalodimas ilias.apalodimas@linaro.org Reviewed-by: Simon Glass sjg@chromium.org --- Changes since v2: - Adjusted board_fdt_blob_setup() for ax25-ae350 to cover OF_BOARD cases Changes since v1: - Remove the sifive unleashed/unmatched changes, since they'll be handled arch/riscv/cpu/cpu.c | 3 --- arch/riscv/cpu/start.S | 5 ----- arch/riscv/dts/binman.dtsi | 6 +++--- board/AndesTech/ax25-ae350/ax25-ae350.c | 7 ++++++- board/emulation/qemu-riscv/qemu-riscv.c | 9 +++++++++ configs/ae350_rv32_defconfig | 2 +- configs/ae350_rv32_spl_defconfig | 2 +- configs/ae350_rv64_defconfig | 2 +- configs/ae350_rv64_spl_defconfig | 2 +- configs/qemu-riscv32_defconfig | 2 +- configs/qemu-riscv32_smode_defconfig | 2 +- configs/qemu-riscv32_spl_defconfig | 2 +- configs/qemu-riscv64_defconfig | 2 +- configs/qemu-riscv64_smode_defconfig | 2 +- configs/qemu-riscv64_spl_defconfig | 2 +- dts/Kconfig | 2 +- 16 files changed, 29 insertions(+), 23 deletions(-)
diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c index c894ac10b536..e16f1df30254 100644 --- a/arch/riscv/cpu/cpu.c +++ b/arch/riscv/cpu/cpu.c @@ -16,9 +16,6 @@ * The variables here must be stored in the data section since they are used * before the bss section is available. */ -#ifdef CONFIG_OF_PRIOR_STAGE -phys_addr_t prior_stage_fdt_address __section(".data"); -#endif #ifndef CONFIG_XIP u32 hart_lottery __section(".data") = 0;
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index 308b0a97a58f..76850ec9be2c 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -142,11 +142,6 @@ call_harts_early_init: bnez tp, secondary_hart_loop #endif
-#ifdef CONFIG_OF_PRIOR_STAGE - la t0, prior_stage_fdt_address - SREG s1, 0(t0) -#endif - jal board_init_f_init_reserve
SREG s1, GD_FIRMWARE_FDT_ADDR(gp) diff --git a/arch/riscv/dts/binman.dtsi b/arch/riscv/dts/binman.dtsi index d26cfdb78a9e..5757ef65ea4b 100644 --- a/arch/riscv/dts/binman.dtsi +++ b/arch/riscv/dts/binman.dtsi @@ -48,7 +48,7 @@ }; };
-#ifndef CONFIG_OF_PRIOR_STAGE +#ifndef CONFIG_OF_BOARD @fdt-SEQ { description = "NAME"; type = "flat_dt"; @@ -60,7 +60,7 @@ configurations { default = "conf-1";
-#ifndef CONFIG_OF_PRIOR_STAGE +#ifndef CONFIG_OF_BOARD @conf-SEQ { #else conf-1 { @@ -68,7 +68,7 @@ description = "NAME"; firmware = "opensbi"; loadables = "uboot"; -#ifndef CONFIG_OF_PRIOR_STAGE +#ifndef CONFIG_OF_BOARD fdt = "fdt-SEQ"; #endif }; diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c b/board/AndesTech/ax25-ae350/ax25-ae350.c index 81b0ee992372..6de91208258f 100644 --- a/board/AndesTech/ax25-ae350/ax25-ae350.c +++ b/board/AndesTech/ax25-ae350/ax25-ae350.c @@ -21,7 +21,6 @@
DECLARE_GLOBAL_DATA_PTR;
-extern phys_addr_t prior_stage_fdt_address; /* * Miscellaneous platform dependent initializations */ @@ -57,7 +56,13 @@ ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
void *board_fdt_blob_setup(void) { +#if CONFIG_IS_ENABLED(OF_BOARD) + return (void *)gd->arch.firmware_fdt_addr; +#elif CONFIG_IS_ENABLED(OF_SEPARATE) return (void *)CONFIG_SYS_FDT_BASE; +#else + return NULL; +#endif }
int smc_init(void) diff --git a/board/emulation/qemu-riscv/qemu-riscv.c b/board/emulation/qemu-riscv/qemu-riscv.c index dcfd3f20bee6..aa91ca91325c 100644 --- a/board/emulation/qemu-riscv/qemu-riscv.c +++ b/board/emulation/qemu-riscv/qemu-riscv.c @@ -14,6 +14,8 @@ #include <virtio_types.h> #include <virtio.h>
+DECLARE_GLOBAL_DATA_PTR; + int board_init(void) { /* @@ -69,3 +71,10 @@ int board_fit_config_name_match(const char *name) return 0; } #endif + +void *board_fdt_blob_setup(void) +{ + /* Stored the DTB address there during our init */ + return (void *)gd->arch.firmware_fdt_addr; +} + diff --git a/configs/ae350_rv32_defconfig b/configs/ae350_rv32_defconfig index 4e7a1686a64d..8b6c0b8a4a0a 100644 --- a/configs/ae350_rv32_defconfig +++ b/configs/ae350_rv32_defconfig @@ -15,7 +15,7 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/ae350_rv32_spl_defconfig b/configs/ae350_rv32_spl_defconfig index 34c6af6e7e17..a0fe9b9a71df 100644 --- a/configs/ae350_rv32_spl_defconfig +++ b/configs/ae350_rv32_spl_defconfig @@ -19,7 +19,7 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTP_SEND_HOSTNAME=y diff --git a/configs/ae350_rv64_defconfig b/configs/ae350_rv64_defconfig index 05eee371ac2f..cb23cbd3d95e 100644 --- a/configs/ae350_rv64_defconfig +++ b/configs/ae350_rv64_defconfig @@ -16,7 +16,7 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/ae350_rv64_spl_defconfig b/configs/ae350_rv64_spl_defconfig index 9cd7848c92eb..9ad312505db3 100644 --- a/configs/ae350_rv64_spl_defconfig +++ b/configs/ae350_rv64_spl_defconfig @@ -20,7 +20,7 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTP_SEND_HOSTNAME=y diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig index 8ac16cf4186e..6fe133c268d7 100644 --- a/configs/qemu-riscv32_defconfig +++ b/configs/qemu-riscv32_defconfig @@ -9,6 +9,6 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/configs/qemu-riscv32_smode_defconfig b/configs/qemu-riscv32_smode_defconfig index 05eda439618f..c67e8206d1ab 100644 --- a/configs/qemu-riscv32_smode_defconfig +++ b/configs/qemu-riscv32_smode_defconfig @@ -10,6 +10,6 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig index ee81e552724d..77e81fac3af7 100644 --- a/configs/qemu-riscv32_spl_defconfig +++ b/configs/qemu-riscv32_spl_defconfig @@ -12,6 +12,6 @@ CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_SBI=y # CONFIG_CMD_MII is not set -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig index daf5d655d01f..90e87672aab0 100644 --- a/configs/qemu-riscv64_defconfig +++ b/configs/qemu-riscv64_defconfig @@ -10,6 +10,6 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig index 4a6416e2540b..0a8393903368 100644 --- a/configs/qemu-riscv64_smode_defconfig +++ b/configs/qemu-riscv64_smode_defconfig @@ -13,6 +13,6 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig index 429d4d814e65..a15e82dd3ee1 100644 --- a/configs/qemu-riscv64_spl_defconfig +++ b/configs/qemu-riscv64_spl_defconfig @@ -13,6 +13,6 @@ CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_SBI=y # CONFIG_CMD_MII is not set -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/dts/Kconfig b/dts/Kconfig index dabe0080c1ef..39270b47f9f0 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -107,7 +107,7 @@ config OF_EMBED Boards in the mainline U-Boot tree should not use it.
config OF_BOARD - bool "Provided by the board at runtime" + bool "Provided by the board (e.g a previous loader) at runtime" depends on !SANDBOX help If this option is enabled, the device tree will be provided by
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics.
So let's remove the option in an effort to simplify U-Boot's config and DTB management, and use OF_BOARD instead.
Signed-off-by: Ilias Apalodimas ilias.apalodimas@linaro.org Reviewed-by: Simon Glass sjg@chromium.org --- Changes since v1, v2: - none arch/arm/Kconfig | 1 - board/broadcom/bcmstb/bcmstb.c | 6 ++++++ configs/bcm7260_defconfig | 2 +- configs/bcm7445_defconfig | 2 +- 4 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b5bd3284cd1c..8bc4391fcb27 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -620,7 +620,6 @@ config ARCH_BCMSTB select DM select GPIO_EXTRA_HEADER select OF_CONTROL - select OF_PRIOR_STAGE imply CMD_DM help This enables support for Broadcom ARM-based set-top box diff --git a/board/broadcom/bcmstb/bcmstb.c b/board/broadcom/bcmstb/bcmstb.c index 076ac9414418..40d9def24b7b 100644 --- a/board/broadcom/bcmstb/bcmstb.c +++ b/board/broadcom/bcmstb/bcmstb.c @@ -135,3 +135,9 @@ int board_late_init(void)
return 0; } + +void *board_fdt_blob_setup(void) +{ + /* Stored the DTB address there during our init */ + return (void *)prior_stage_fdt_address; +} diff --git a/configs/bcm7260_defconfig b/configs/bcm7260_defconfig index a42a6acb06d5..be0c945dc811 100644 --- a/configs/bcm7260_defconfig +++ b/configs/bcm7260_defconfig @@ -22,7 +22,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FS_GENERIC=y -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y diff --git a/configs/bcm7445_defconfig b/configs/bcm7445_defconfig index 96e8da0748ae..9ab72dcf37c7 100644 --- a/configs/bcm7445_defconfig +++ b/configs/bcm7445_defconfig @@ -23,7 +23,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FS_GENERIC=y -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
The previous patches removed OF_PRIOR_STAGE from the last consumers of the Kconfig option. Cleanup any references to it in documentation, code and configuration options.
Signed-off-by: Ilias Apalodimas ilias.apalodimas@linaro.org Reviewed-by: Simon Glass sjg@chromium.org --- Changes since v1, v2: - none dts/Kconfig | 11 ++--------- include/fdtdec.h | 4 ---- lib/fdtdec.c | 2 -- tools/binman/binman.rst | 16 ++++++---------- 4 files changed, 8 insertions(+), 25 deletions(-)
diff --git a/dts/Kconfig b/dts/Kconfig index 39270b47f9f0..100769017e12 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -22,7 +22,7 @@ config BINMAN config BINMAN_STANDALONE_FDT bool depends on BINMAN - default y if OF_BOARD || OF_PRIOR_STAGE + default y if OF_BOARD help This option tells U-Boot build system that a standalone device tree source is explicitly required when using binman to package U-Boot. @@ -32,7 +32,7 @@ config BINMAN_STANDALONE_FDT directory for a specific board. Such device tree sources are built for OF_SEPARATE or OF_EMBED. However for a scenario like the board device tree blob is not provided in the U-Boot build tree, but fed to U-Boot - in the runtime, e.g.: in the OF_PRIOR_STAGE case that it is passed by + in the runtime, e.g.: in the OF_BOARD case that it is passed by a prior stage bootloader. For such scenario, a standalone device tree blob containing binman node to describe how to package U-Boot should be provided explicitly. @@ -122,13 +122,6 @@ config OF_HOSTFILE This is only useful for Sandbox. Use the -d flag to U-Boot to specify the file to read.
-config OF_PRIOR_STAGE - bool "Prior stage bootloader DTB for DT control" - help - If this option is enabled, the device tree used for DT - control will be read from a device tree binary, at a memory - location passed to U-Boot by the prior stage bootloader. - endchoice
config DEFAULT_DEVICE_TREE diff --git a/include/fdtdec.h b/include/fdtdec.h index 8ac20c9a64f7..d0e13fc18313 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -55,10 +55,6 @@ struct bd_info; #define SPL_BUILD 0 #endif
-#ifdef CONFIG_OF_PRIOR_STAGE -extern phys_addr_t prior_stage_fdt_address; -#endif - /* * Information about a resource. start is the first address of the resource * and end is the last address (inclusive). The length of the resource will diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 7358cb6dd168..7b379564600d 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1580,8 +1580,6 @@ int fdtdec_setup(void) puts("Failed to read control FDT\n"); return -1; } -# elif defined(CONFIG_OF_PRIOR_STAGE) - gd->fdt_blob = (void *)(uintptr_t)prior_stage_fdt_address; # endif # ifndef CONFIG_SPL_BUILD /* Allow the early environment to override the fdt address */ diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst index 09e7b5719825..614df541c5ac 100644 --- a/tools/binman/binman.rst +++ b/tools/binman/binman.rst @@ -232,18 +232,18 @@ You can use other, more specific CONFIG options - see 'Automatic .dtsi inclusion' below.
-Using binman with OF_BOARD or OF_PRIOR_STAGE +Using binman with OF_BOARD --------------------------------------------
Normally binman is used with a board configured with OF_SEPARATE or OF_EMBED. This is a typical scenario where a device tree source that contains the binman node is provided in the arch/<arch>/dts directory for a specific board.
-However for a board configured with OF_BOARD or OF_PRIOR_STAGE, no device tree -blob is provided in the U-Boot build phase hence the binman node information -is not available. In order to support such use case, a new Kconfig option -BINMAN_STANDALONE_FDT is introduced, to tell the build system that a standalone -device tree blob containing binman node is explicitly required. +However for a board configured with OF_BOARD, no device tree blob is provided +in the U-Boot build phase hence the binman node information is not available. +In order to support such use case, a new Kconfig option BINMAN_STANDALONE_FDT +is introduced, to tell the build system that a standalone device tree blob +containing binman node is explicitly required.
Note there is a Kconfig option BINMAN_FDT which enables U-Boot run time to access information about binman entries, stored in the device tree in a binman @@ -252,10 +252,6 @@ For the other OF_CONTROL methods, it's quite possible binman node is not available as binman is invoked during the build phase, thus this option is not turned on by default for these OF_CONTROL methods.
-See qemu-riscv64_spl_defconfig for an example of how binman is used with -OF_PRIOR_STAGE to generate u-boot.itb image. - - Access to binman entry offsets at run time (symbols) ----------------------------------------------------
Hi Ilias,
On Thu, 30 Sept 2021 at 01:18, Ilias Apalodimas ilias.apalodimas@linaro.org wrote:
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boot loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics.
On RISC-V some of the platforms pick up the DTB from a1 and copy it in their private gd_t. Apart from that they copy it to prior_stage_fdt_address, if the Kconfig option is selected, which is unnecessary.
So let's switch the config option for those boards to OF_BOARD and define the required board_fdt_blob_setup() for them.
Signed-off-by: Ilias Apalodimas ilias.apalodimas@linaro.org Reviewed-by: Simon Glass sjg@chromium.org
Changes since v2:
- Adjusted board_fdt_blob_setup() for ax25-ae350 to cover OF_BOARD cases
Changes since v1:
- Remove the sifive unleashed/unmatched changes, since they'll be handled
arch/riscv/cpu/cpu.c | 3 --- arch/riscv/cpu/start.S | 5 ----- arch/riscv/dts/binman.dtsi | 6 +++--- board/AndesTech/ax25-ae350/ax25-ae350.c | 7 ++++++- board/emulation/qemu-riscv/qemu-riscv.c | 9 +++++++++ configs/ae350_rv32_defconfig | 2 +- configs/ae350_rv32_spl_defconfig | 2 +- configs/ae350_rv64_defconfig | 2 +- configs/ae350_rv64_spl_defconfig | 2 +- configs/qemu-riscv32_defconfig | 2 +- configs/qemu-riscv32_smode_defconfig | 2 +- configs/qemu-riscv32_spl_defconfig | 2 +- configs/qemu-riscv64_defconfig | 2 +- configs/qemu-riscv64_smode_defconfig | 2 +- configs/qemu-riscv64_spl_defconfig | 2 +- dts/Kconfig | 2 +- 16 files changed, 29 insertions(+), 23 deletions(-)
Reviewed-by: Simon Glass sjg@chromium.org
But please drop the extra blank line at the end of qemu-riscv.c and wrap the commit message to 75 chars. Do you use patman to check/send patches?
[..]
Regards, Simon
Hi Ilias,
On Thu, 30 Sept 2021 at 01:18, Ilias Apalodimas ilias.apalodimas@linaro.org wrote:
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boot loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics.
On RISC-V some of the platforms pick up the DTB from a1 and copy it in their private gd_t. Apart from that they copy it to prior_stage_fdt_address, if the Kconfig option is selected, which is unnecessary.
So let's switch the config option for those boards to OF_BOARD and define the required board_fdt_blob_setup() for them.
Signed-off-by: Ilias Apalodimas ilias.apalodimas@linaro.org Reviewed-by: Simon Glass sjg@chromium.org
Changes since v2:
- Adjusted board_fdt_blob_setup() for ax25-ae350 to cover OF_BOARD cases
Changes since v1:
- Remove the sifive unleashed/unmatched changes, since they'll be handled
arch/riscv/cpu/cpu.c | 3 --- arch/riscv/cpu/start.S | 5 ----- arch/riscv/dts/binman.dtsi | 6 +++--- board/AndesTech/ax25-ae350/ax25-ae350.c | 7 ++++++- board/emulation/qemu-riscv/qemu-riscv.c | 9 +++++++++ configs/ae350_rv32_defconfig | 2 +- configs/ae350_rv32_spl_defconfig | 2 +- configs/ae350_rv64_defconfig | 2 +- configs/ae350_rv64_spl_defconfig | 2 +- configs/qemu-riscv32_defconfig | 2 +- configs/qemu-riscv32_smode_defconfig | 2 +- configs/qemu-riscv32_spl_defconfig | 2 +- configs/qemu-riscv64_defconfig | 2 +- configs/qemu-riscv64_smode_defconfig | 2 +- configs/qemu-riscv64_spl_defconfig | 2 +- dts/Kconfig | 2 +- 16 files changed, 29 insertions(+), 23 deletions(-)
[..]
diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c b/board/AndesTech/ax25-ae350/ax25-ae350.c index 81b0ee992372..6de91208258f 100644 --- a/board/AndesTech/ax25-ae350/ax25-ae350.c +++ b/board/AndesTech/ax25-ae350/ax25-ae350.c @@ -21,7 +21,6 @@
DECLARE_GLOBAL_DATA_PTR;
-extern phys_addr_t prior_stage_fdt_address; /*
- Miscellaneous platform dependent initializations
*/ @@ -57,7 +56,13 @@ ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
void *board_fdt_blob_setup(void) { +#if CONFIG_IS_ENABLED(OF_BOARD)
return (void *)gd->arch.firmware_fdt_addr;
This cast produces a warning for me, with qemu-riscv32
+#elif CONFIG_IS_ENABLED(OF_SEPARATE) return (void *)CONFIG_SYS_FDT_BASE; +#else
return NULL;+#endif }
Regards, Simon
Hi Simon
[....]
diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c b/board/AndesTech/ax25-ae350/ax25-ae350.c index 81b0ee992372..6de91208258f 100644 --- a/board/AndesTech/ax25-ae350/ax25-ae350.c +++ b/board/AndesTech/ax25-ae350/ax25-ae350.c @@ -21,7 +21,6 @@
DECLARE_GLOBAL_DATA_PTR;
-extern phys_addr_t prior_stage_fdt_address; /*
- Miscellaneous platform dependent initializations
*/ @@ -57,7 +56,13 @@ ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
void *board_fdt_blob_setup(void) { +#if CONFIG_IS_ENABLED(OF_BOARD)
return (void *)gd->arch.firmware_fdt_addr;This cast produces a warning for me, with qemu-riscv32
Uhm? What kind of warning? This is got an AndesTech board. How is QEMU related?
Cheers /Ilias
+#elif CONFIG_IS_ENABLED(OF_SEPARATE) return (void *)CONFIG_SYS_FDT_BASE; +#else
return NULL;+#endif }
Regards, Simon
participants (2)
-
Ilias Apalodimas -
Simon Glass