[U-Boot] ls1021atwr: Convert to use driver model TSEC driver
Hi York,
There was a patch [1] previously done by me to convert to use driver model TSEC driver on LS1021ATWR. It was never accepted given at that time the PCI driver for LS1021A has not been converted to use driver model yet, and DM PCI is unfortunately bundled to DM ETH.
Now that we have converted to use DM PCI, would it possible for NXP guys to pick up this work and do the DM ETH conversion for LS1021ATWR? Thanks!
[1] http://patchwork.ozlabs.org/patch/566347/
Regards, Bin
Alison and Prabhakar,
Please take a look at the mentioned patch.
York
On 05/29/2018 07:24 PM, Bin Meng wrote:
Hi York,
There was a patch [1] previously done by me to convert to use driver model TSEC driver on LS1021ATWR. It was never accepted given at that time the PCI driver for LS1021A has not been converted to use driver model yet, and DM PCI is unfortunately bundled to DM ETH.
Now that we have converted to use DM PCI, would it possible for NXP guys to pick up this work and do the DM ETH conversion for LS1021ATWR? Thanks!
[1] https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatchwork....
Regards, Bin
Hi,
On Wed, May 30, 2018 at 11:06 AM, York Sun york.sun@nxp.com wrote:
Alison and Prabhakar,
Please take a look at the mentioned patch.
Would you please take the patch and update all LS1021A boards? thanks!
Regards, Bin
On May 31, 2018, at 20:58, Bin Meng bmeng.cn@gmail.com wrote:
Hi,
On Wed, May 30, 2018 at 11:06 AM, York Sun york.sun@nxp.com wrote: Alison and Prabhakar,
Please take a look at the mentioned patch.
Would you please take the patch and update all LS1021A boards? thanks!
Bin,
I expect LS1021A board maintainers to chime in.
York
Hi Alison, Prabhakar,
On Fri, Jun 1, 2018 at 12:06 PM, York Sun york.sun@nxp.com wrote:
On May 31, 2018, at 20:58, Bin Meng bmeng.cn@gmail.com wrote:
Hi,
On Wed, May 30, 2018 at 11:06 AM, York Sun york.sun@nxp.com wrote: Alison and Prabhakar,
Please take a look at the mentioned patch.
Would you please take the patch and update all LS1021A boards? thanks!
Bin,
I expect LS1021A board maintainers to chime in.
Would you please comment on this? Thanks!
Regards, Bin
On Tue, Jun 5, 2018 at 9:28 AM, Bin Meng bmeng.cn@gmail.com wrote:
Hi Alison, Prabhakar,
On Fri, Jun 1, 2018 at 12:06 PM, York Sun york.sun@nxp.com wrote:
On May 31, 2018, at 20:58, Bin Meng bmeng.cn@gmail.com wrote:
Hi,
On Wed, May 30, 2018 at 11:06 AM, York Sun york.sun@nxp.com wrote: Alison and Prabhakar,
Please take a look at the mentioned patch.
Would you please take the patch and update all LS1021A boards? thanks!
Bin,
I expect LS1021A board maintainers to chime in.
Would you please comment on this? Thanks!
Ping ...
On 06/10/2018 10:37 PM, Bin Meng wrote:
On Tue, Jun 5, 2018 at 9:28 AM, Bin Meng bmeng.cn@gmail.com wrote:
Hi Alison, Prabhakar,
On Fri, Jun 1, 2018 at 12:06 PM, York Sun york.sun@nxp.com wrote:
On May 31, 2018, at 20:58, Bin Meng bmeng.cn@gmail.com wrote:
Hi,
On Wed, May 30, 2018 at 11:06 AM, York Sun york.sun@nxp.com wrote: Alison and Prabhakar,
Please take a look at the mentioned patch.
Would you please take the patch and update all LS1021A boards? thanks!
Bin,
I expect LS1021A board maintainers to chime in.
Would you please comment on this? Thanks!
Ping ...
Bin,
Our TSEC driver owner Claudiu Manoil (CC'ed) plans to work on the driver a while later.
York
Hi Claudiu,
On Mon, Jun 11, 2018 at 10:28 PM, York Sun york.sun@nxp.com wrote:
On 06/10/2018 10:37 PM, Bin Meng wrote:
On Tue, Jun 5, 2018 at 9:28 AM, Bin Meng bmeng.cn@gmail.com wrote:
Hi Alison, Prabhakar,
On Fri, Jun 1, 2018 at 12:06 PM, York Sun york.sun@nxp.com wrote:
On May 31, 2018, at 20:58, Bin Meng bmeng.cn@gmail.com wrote:
Hi,
On Wed, May 30, 2018 at 11:06 AM, York Sun york.sun@nxp.com wrote: Alison and Prabhakar,
Please take a look at the mentioned patch.
Would you please take the patch and update all LS1021A boards? thanks!
Bin,
I expect LS1021A board maintainers to chime in.
Would you please comment on this? Thanks!
Ping ...
Bin,
Our TSEC driver owner Claudiu Manoil (CC'ed) plans to work on the driver a while later.
Do you have ETA of the DM ETH conversion for LS1021ATWR board?
Regards, Bin
-----Original Message----- From: Bin Meng [mailto:bmeng.cn@gmail.com] Sent: Tuesday, July 10, 2018 5:43 AM To: York Sun york.sun@nxp.com Cc: Alison Wang alison.wang@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com; U-Boot Mailing List u-boot@lists.denx.de; Claudiu Manoil claudiu.manoil@nxp.com Subject: Re: ls1021atwr: Convert to use driver model TSEC driver
Hi Claudiu,
On Mon, Jun 11, 2018 at 10:28 PM, York Sun york.sun@nxp.com wrote:
On 06/10/2018 10:37 PM, Bin Meng wrote:
On Tue, Jun 5, 2018 at 9:28 AM, Bin Meng bmeng.cn@gmail.com wrote:
Hi Alison, Prabhakar,
On Fri, Jun 1, 2018 at 12:06 PM, York Sun york.sun@nxp.com wrote:
On May 31, 2018, at 20:58, Bin Meng bmeng.cn@gmail.com wrote:
Hi,
> On Wed, May 30, 2018 at 11:06 AM, York Sun york.sun@nxp.com
wrote:
> Alison and Prabhakar, > > Please take a look at the mentioned patch. >
Would you please take the patch and update all LS1021A boards? thanks!
Bin,
I expect LS1021A board maintainers to chime in.
Would you please comment on this? Thanks!
Ping ...
Bin,
Our TSEC driver owner Claudiu Manoil (CC'ed) plans to work on the driver a while later.
Do you have ETA of the DM ETH conversion for LS1021ATWR board?
Hi, No ETA right now. There's not only the LS1021ATRW board, there are also a lot of legacy PowerPC platforms that would have to be converted too. All the platforms featuring the TSEC h/w will have to be verified as well. Converting the TSEC driver to work only for the ls1 twr board will break the other platforms. Is there a urgent need to move to the new DM ETH model? Ensuring backward compatibility, not breaking legacy platforms is the most important part here and I don't have the bandwidth to do that right now.
Thanks, Claudiu
Hi Claudiu,
On Tue, Jul 17, 2018 at 4:54 PM, Claudiu Manoil claudiu.manoil@nxp.com wrote:
-----Original Message----- From: Bin Meng [mailto:bmeng.cn@gmail.com] Sent: Tuesday, July 10, 2018 5:43 AM To: York Sun york.sun@nxp.com Cc: Alison Wang alison.wang@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com; U-Boot Mailing List u-boot@lists.denx.de; Claudiu Manoil claudiu.manoil@nxp.com Subject: Re: ls1021atwr: Convert to use driver model TSEC driver
Hi Claudiu,
On Mon, Jun 11, 2018 at 10:28 PM, York Sun york.sun@nxp.com wrote:
On 06/10/2018 10:37 PM, Bin Meng wrote:
On Tue, Jun 5, 2018 at 9:28 AM, Bin Meng bmeng.cn@gmail.com wrote:
Hi Alison, Prabhakar,
On Fri, Jun 1, 2018 at 12:06 PM, York Sun york.sun@nxp.com wrote:
On May 31, 2018, at 20:58, Bin Meng bmeng.cn@gmail.com wrote: > > Hi, > >> On Wed, May 30, 2018 at 11:06 AM, York Sun york.sun@nxp.com
wrote:
>> Alison and Prabhakar, >> >> Please take a look at the mentioned patch. >> > > Would you please take the patch and update all LS1021A boards? thanks!
Bin,
I expect LS1021A board maintainers to chime in.
Would you please comment on this? Thanks!
Ping ...
Bin,
Our TSEC driver owner Claudiu Manoil (CC'ed) plans to work on the driver a while later.
Do you have ETA of the DM ETH conversion for LS1021ATWR board?
Hi, No ETA right now. There's not only the LS1021ATRW board, there are also a lot of legacy PowerPC platforms that would have to be converted too. All the platforms featuring the TSEC h/w will have to be verified as well. Converting the TSEC driver to work only for the ls1 twr board will break the other platforms. Is there a urgent need to move to the new DM ETH model? Ensuring backward compatibility, not breaking legacy platforms is the most important part here and I don't have the bandwidth to do that right now.
There might be some misunderstanding here. The TSEC driver has already been converted to DM ETH. The driver supports both non-DM and DM. The remaining work is to update LS1021ATWR board codes (ie: board device tree file) to support DM ETH TSEC driver. These won't break the legacy PowerPC platform. PowerPC conversion to DM ETH TSEC driver can be done later.
Regards, Bin
participants (3)
-
Bin Meng -
Claudiu Manoil -
York Sun