[U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr-seed
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
sec_firmware reserves JR3 for it's own usage. Node for JR3 is removed from device-tree.
Signed-off-by: Ruchika Gupta ruchika.gupta@nxp.com --- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 73 +++++++++++++++++++++++++++++++ arch/arm/cpu/armv8/sec_firmware.c | 53 ++++++++++++++++++++++ arch/arm/include/asm/armv8/sec_firmware.h | 9 ++++ 3 files changed, 135 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 05c4577..d4ca129 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -345,6 +345,75 @@ static void fdt_fixup_msi(void *blob) } #endif
+ +int fdt_fixup_kaslr(void *fdt) +{ + int nodeoffset; + int err, ret = 0; + u8 rand[8]; + +#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) + /* Check if random seed generation is supported */ + if (sec_firmware_support_hwrng() == false) + return 0; + + ret = sec_firmware_get_random(rand, 8); + if (ret < 0) { + printf("WARNING: could not get random number to set", + "kaslr-seed\n"); + return 0; + } + + err = fdt_check_header(fdt); + if (err < 0) { + printf("fdt_chosen: %s\n", fdt_strerror(err)); + return 0; + } + + /* find or create "/chosen" node. */ + nodeoffset = fdt_find_or_add_subnode(fdt, 0, "chosen"); + if (nodeoffset < 0) + return 0; + + err = fdt_setprop(fdt, nodeoffset, "kaslr-seed", rand, + sizeof(rand)); + if (err < 0) { + printf("WARNING: could not set kaslr-seed %s.\n", + fdt_strerror(err)); + return 0; + } + ret = 1; +#endif + + return ret; +} + +/* Remove JR node used by SEC firmware */ +void fdt_fixup_remove_jr(void *blob) +{ + int jr_node, addr_cells, len; + int crypto_node = fdt_path_offset(blob, "crypto"); + u64 jr_offset, used_jr; + fdt32_t *reg; + + used_jr = sec_firmware_used_jobring_offset(); + of_bus_default_count_cells(blob, crypto_node, &addr_cells, NULL); + + jr_node = fdt_node_offset_by_compatible(blob, crypto_node, + "fsl,sec-v4.0-job-ring"); + + while (jr_node != -FDT_ERR_NOTFOUND) { + reg = (fdt32_t *)fdt_getprop(blob, jr_node, "reg", &len); + jr_offset = of_read_number(reg, addr_cells); + if (jr_offset == used_jr) { + fdt_del_node(blob, jr_node); + break; + } + jr_node = fdt_node_offset_by_compatible(blob, jr_node, + "fsl,sec-v4.0-job-ring"); + } +} + void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_FSL_LSCH2 @@ -358,6 +427,9 @@ void ft_cpu_setup(void *blob, bd_t *bd) else { ccsr_sec_t __iomem *sec;
+ if (fdt_fixup_kaslr(blob)) + fdt_fixup_remove_jr(blob); + sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); } @@ -396,4 +468,5 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_HAS_FEATURE_ENHANCED_MSI fdt_fixup_msi(blob); #endif + } diff --git a/arch/arm/cpu/armv8/sec_firmware.c b/arch/arm/cpu/armv8/sec_firmware.c index 4afa3ad..f460cca 100644 --- a/arch/arm/cpu/armv8/sec_firmware.c +++ b/arch/arm/cpu/armv8/sec_firmware.c @@ -232,6 +232,59 @@ unsigned int sec_firmware_support_psci_version(void) #endif
/* + * Check with sec_firmware if it supports random number generation + * via HW RNG + * + * The return value will be true if it is supported + */ +bool sec_firmware_support_hwrng(void) +{ + uint8_t rand[8]; + if (sec_firmware_addr & SEC_FIRMWARE_RUNNING) { + if (!sec_firmware_get_random(rand, 8)) + return true; + } + + return false; +} + +/* + * sec_firmware_get_random - Initialize the SEC Firmware + * @rand: random number buffer to be filled + * @bytes: Number of bytes of random number to be supported + * @eret: -1 in case of error, 0 for success + */ +int sec_firmware_get_random(uint8_t *rand, int bytes) +{ + unsigned long long num; + struct pt_regs regs; + int param1; + + if (!bytes || bytes > 8) { + printf("Max Random bytes genration supported is 8\n"); + return -1; + } +#define SIP_RNG_64 0xC200FF11 + regs.regs[0] = SIP_RNG_64; + + if (bytes <= 4) + param1 = 0; + else + param1 = 1; + regs.regs[1] = param1; + + smc_call(®s); + + if (regs.regs[0]) + return -1; + + num = regs.regs[1]; + memcpy(rand, &num, bytes); + + return 0; +} + +/* * sec_firmware_init - Initialize the SEC Firmware * @sec_firmware_img: the SEC Firmware image address * @eret_hold_l: the address to hold exception return address low diff --git a/arch/arm/include/asm/armv8/sec_firmware.h b/arch/arm/include/asm/armv8/sec_firmware.h index bc1d97d..1dc547a 100644 --- a/arch/arm/include/asm/armv8/sec_firmware.h +++ b/arch/arm/include/asm/armv8/sec_firmware.h @@ -8,10 +8,13 @@ #define __SEC_FIRMWARE_H_
#define PSCI_INVALID_VER 0xffffffff +#define SEC_JR3_OFFSET 0x40000
int sec_firmware_init(const void *, u32 *, u32 *); int _sec_firmware_entry(const void *, u32 *, u32 *); bool sec_firmware_is_valid(const void *); +bool sec_firmware_support_hwrng(void); +int sec_firmware_get_random(uint8_t *rand, int bytes); #ifdef CONFIG_SEC_FIRMWARE_ARMV8_PSCI unsigned int sec_firmware_support_psci_version(void); unsigned int _sec_firmware_support_psci_version(void); @@ -22,4 +25,10 @@ static inline unsigned int sec_firmware_support_psci_version(void) } #endif
+static inline unsigned int sec_firmware_used_jobring_offset(void) +{ + return SEC_JR3_OFFSET; +} + + #endif /* __SEC_FIRMWARE_H_ */
On Sat, May 13, 2017 at 05:37:05AM +0530, Ruchika Gupta wrote:
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
sec_firmware reserves JR3 for it's own usage. Node for JR3 is removed from device-tree.
Signed-off-by: Ruchika Gupta ruchika.gupta@nxp.com
[snip]
@@ -345,6 +345,75 @@ static void fdt_fixup_msi(void *blob) } #endif
+int fdt_fixup_kaslr(void *fdt)
There's a few places like this where you're adding extra whitespace, please fix.
-----Original Message----- From: U-Boot [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Ruchika Gupta Sent: Saturday, May 13, 2017 5:37 AM To: u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Cc: Ruchika Gupta ruchika.gupta@nxp.com Subject: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr-seed
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
sec_firmware reserves JR3 for it's own usage. Node for JR3 is removed from device-tree.
Signed-off-by: Ruchika Gupta ruchika.gupta@nxp.com --- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 73 +++++++++++++++++++++++++++++++ arch/arm/cpu/armv8/sec_firmware.c | 53 ++++++++++++++++++++++ arch/arm/include/asm/armv8/sec_firmware.h | 9 ++++ 3 files changed, 135 insertions(+)
Good to have some documentation of this feature in doc/README.XXX
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 05c4577..d4ca129 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -345,6 +345,75 @@ static void fdt_fixup_msi(void *blob) } #endif
+ +int fdt_fixup_kaslr(void *fdt) +{ + int nodeoffset; + int err, ret = 0; + u8 rand[8]; + +#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) + /* Check if random seed generation is supported */ + if (sec_firmware_support_hwrng() == false) + return 0; + + ret = sec_firmware_get_random(rand, 8); + if (ret < 0) { + printf("WARNING: could not get random number to set", + "kaslr-seed\n"); + return 0; + } + + err = fdt_check_header(fdt); + if (err < 0) { + printf("fdt_chosen: %s\n", fdt_strerror(err)); + return 0; + } + + /* find or create "/chosen" node. */ + nodeoffset = fdt_find_or_add_subnode(fdt, 0, "chosen"); + if (nodeoffset < 0) + return 0; + + err = fdt_setprop(fdt, nodeoffset, "kaslr-seed", rand, +
Are the device-tree bindings approved for " kaslr-seed" in Linux? just thinking, how this feature will work, in kexec type of usecases, in that case probably this logic should go in the kexec logic of the kernel.
sizeof(rand)); + if (err < 0) { + printf("WARNING: could not set kaslr-seed %s.\n", + fdt_strerror(err)); + return 0; + } + ret = 1; +#endif + + return ret; +} + +/* Remove JR node used by SEC firmware */ void fdt_fixup_remove_jr(void +*blob) { + int jr_node, addr_cells, len; + int crypto_node = fdt_path_offset(blob, "crypto"); + u64 jr_offset, used_jr; + fdt32_t *reg; + + used_jr = sec_firmware_used_jobring_offset(); + of_bus_default_count_cells(blob, crypto_node, &addr_cells, NULL); + + jr_node = fdt_node_offset_by_compatible(blob, crypto_node, + "fsl,sec-v4.0-job-ring"); + + while (jr_node != -FDT_ERR_NOTFOUND) { + reg = (fdt32_t *)fdt_getprop(blob, jr_node, "reg", &len); + jr_offset = of_read_number(reg, addr_cells); + if (jr_offset == used_jr) { + fdt_del_node(blob, jr_node); + break; + } + jr_node = fdt_node_offset_by_compatible(blob, jr_node, + "fsl,sec-v4.0-job-ring"); + } +} + void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_FSL_LSCH2 @@ -358,6 +427,9 @@ void ft_cpu_setup(void *blob, bd_t *bd) else { ccsr_sec_t __iomem *sec;
+ if (fdt_fixup_kaslr(blob)) + fdt_fixup_remove_jr(blob); + sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); } @@ -396,4 +468,5 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_HAS_FEATURE_ENHANCED_MSI fdt_fixup_msi(blob); #endif + } diff --git a/arch/arm/cpu/armv8/sec_firmware.c b/arch/arm/cpu/armv8/sec_firmware.c index 4afa3ad..f460cca 100644 --- a/arch/arm/cpu/armv8/sec_firmware.c +++ b/arch/arm/cpu/armv8/sec_firmware.c @@ -232,6 +232,59 @@ unsigned int sec_firmware_support_psci_version(void) #endif
/* + * Check with sec_firmware if it supports random number generation + * via HW RNG + * + * The return value will be true if it is supported */ bool +sec_firmware_support_hwrng(void) { + uint8_t rand[8]; + if (sec_firmware_addr & SEC_FIRMWARE_RUNNING) { + if (!sec_firmware_get_random(rand, 8)) + return true; + } + + return false; +} + +/* + * sec_firmware_get_random - Initialize the SEC Firmware + * @rand: random number buffer to be filled + * @bytes: Number of bytes of random number to be supported + * @eret: -1 in case of error, 0 for success + */ +int sec_firmware_get_random(uint8_t *rand, int bytes) { + unsigned long long num; + struct pt_regs regs; + int param1; + + if (!bytes || bytes > 8) { + printf("Max Random bytes genration supported is 8\n"); + return -1; + } +#define SIP_RNG_64 0xC200FF11 + regs.regs[0] = SIP_RNG_64; + + if (bytes <= 4) + param1 = 0; + else + param1 = 1; + regs.regs[1] = param1; + + smc_call(®s); + + if (regs.regs[0]) + return -1; + + num = regs.regs[1]; + memcpy(rand, &num, bytes); + + return 0; +} + +/* * sec_firmware_init - Initialize the SEC Firmware * @sec_firmware_img: the SEC Firmware image address * @eret_hold_l: the address to hold exception return address low diff --git a/arch/arm/include/asm/armv8/sec_firmware.h b/arch/arm/include/asm/armv8/sec_firmware.h index bc1d97d..1dc547a 100644 --- a/arch/arm/include/asm/armv8/sec_firmware.h +++ b/arch/arm/include/asm/armv8/sec_firmware.h @@ -8,10 +8,13 @@ #define __SEC_FIRMWARE_H_
#define PSCI_INVALID_VER 0xffffffff +#define SEC_JR3_OFFSET 0x40000
int sec_firmware_init(const void *, u32 *, u32 *); int _sec_firmware_entry(const void *, u32 *, u32 *); bool sec_firmware_is_valid(const void *); +bool sec_firmware_support_hwrng(void); +int sec_firmware_get_random(uint8_t *rand, int bytes); #ifdef CONFIG_SEC_FIRMWARE_ARMV8_PSCI unsigned int sec_firmware_support_psci_version(void); unsigned int _sec_firmware_support_psci_version(void); @@ -22,4 +25,10 @@ static inline unsigned int sec_firmware_support_psci_version(void) } #endif
+static inline unsigned int sec_firmware_used_jobring_offset(void) +{ + return SEC_JR3_OFFSET; +} + + #endif /* __SEC_FIRMWARE_H_ */ -- 2.7.4
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
-----Original Message----- From: Poonam Aggrwal Sent: Monday, May 15, 2017 9:27 AM To: Ruchika Gupta ruchika.gupta@nxp.com; u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Cc: Ruchika Gupta ruchika.gupta@nxp.com Subject: RE: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr- seed
-----Original Message----- From: U-Boot [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Ruchika Gupta Sent: Saturday, May 13, 2017 5:37 AM To: u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Cc: Ruchika Gupta ruchika.gupta@nxp.com Subject: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr-seed
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
sec_firmware reserves JR3 for it's own usage. Node for JR3 is removed from device-tree.
Signed-off-by: Ruchika Gupta ruchika.gupta@nxp.com
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 73 +++++++++++++++++++++++++++++++ arch/arm/cpu/armv8/sec_firmware.c | 53 ++++++++++++++++++++++ arch/arm/include/asm/armv8/sec_firmware.h | 9 ++++ 3 files changed, 135 insertions(+)
Good to have some documentation of this feature in doc/README.XXX
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 05c4577..d4ca129 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -345,6 +345,75 @@ static void fdt_fixup_msi(void *blob) } #endif
+int fdt_fixup_kaslr(void *fdt) +{
- int nodeoffset;
- int err, ret = 0;
- u8 rand[8];
+#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT)
- /* Check if random seed generation is supported */
- if (sec_firmware_support_hwrng() == false)
return 0;- ret = sec_firmware_get_random(rand, 8);
- if (ret < 0) {
printf("WARNING: could not get random number to set","kaslr-seed\n");return 0;- }
- err = fdt_check_header(fdt);
- if (err < 0) {
printf("fdt_chosen: %s\n", fdt_strerror(err));return 0;- }
- /* find or create "/chosen" node. */
- nodeoffset = fdt_find_or_add_subnode(fdt, 0, "chosen");
- if (nodeoffset < 0)
return 0;- err = fdt_setprop(fdt, nodeoffset, "kaslr-seed", rand,
Are the device-tree bindings approved for " kaslr-seed" in Linux? just thinking, how this feature will work, in kexec type of usecases, in that
case probably this logic should go in the kexec logic of the kernel.
Linux - arch/arm64/Kconfig --> config_option RANDOMIZE_BASE requires the bootloader to pass random u64 value via chosen/kaslr-seed
Ruchika
On Sat, May 13, 2017 at 1:07 AM, Ruchika Gupta ruchika.gupta@nxp.com wrote:
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
Is that functionality generic that it can be consumed by other devices?
sec_firmware reserves JR3 for it's own usage. Node for JR3 is removed from device-tree.
Signed-off-by: Ruchika Gupta ruchika.gupta@nxp.com
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 73 +++++++++++++++++++++++++++++++ arch/arm/cpu/armv8/sec_firmware.c | 53 ++++++++++++++++++++++ arch/arm/include/asm/armv8/sec_firmware.h | 9 ++++ 3 files changed, 135 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 05c4577..d4ca129 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -345,6 +345,75 @@ static void fdt_fixup_msi(void *blob) } #endif
+int fdt_fixup_kaslr(void *fdt) +{
int nodeoffset;int err, ret = 0;u8 rand[8];+#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT)
/* Check if random seed generation is supported */if (sec_firmware_support_hwrng() == false)return 0;ret = sec_firmware_get_random(rand, 8);if (ret < 0) {printf("WARNING: could not get random number to set","kaslr-seed\n");return 0;}err = fdt_check_header(fdt);if (err < 0) {printf("fdt_chosen: %s\n", fdt_strerror(err));return 0;}/* find or create "/chosen" node. */nodeoffset = fdt_find_or_add_subnode(fdt, 0, "chosen");if (nodeoffset < 0)return 0;err = fdt_setprop(fdt, nodeoffset, "kaslr-seed", rand,sizeof(rand));if (err < 0) {printf("WARNING: could not set kaslr-seed %s.\n",fdt_strerror(err));return 0;}ret = 1;+#endif
return ret;+}
+/* Remove JR node used by SEC firmware */ +void fdt_fixup_remove_jr(void *blob) +{
int jr_node, addr_cells, len;int crypto_node = fdt_path_offset(blob, "crypto");u64 jr_offset, used_jr;fdt32_t *reg;used_jr = sec_firmware_used_jobring_offset();of_bus_default_count_cells(blob, crypto_node, &addr_cells, NULL);jr_node = fdt_node_offset_by_compatible(blob, crypto_node,"fsl,sec-v4.0-job-ring");while (jr_node != -FDT_ERR_NOTFOUND) {reg = (fdt32_t *)fdt_getprop(blob, jr_node, "reg", &len);jr_offset = of_read_number(reg, addr_cells);if (jr_offset == used_jr) {fdt_del_node(blob, jr_node);break;}jr_node = fdt_node_offset_by_compatible(blob, jr_node,"fsl,sec-v4.0-job-ring");}+}
void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_FSL_LSCH2 @@ -358,6 +427,9 @@ void ft_cpu_setup(void *blob, bd_t *bd) else { ccsr_sec_t __iomem *sec;
if (fdt_fixup_kaslr(blob))fdt_fixup_remove_jr(blob);sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); }@@ -396,4 +468,5 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_HAS_FEATURE_ENHANCED_MSI fdt_fixup_msi(blob); #endif
} diff --git a/arch/arm/cpu/armv8/sec_firmware.c b/arch/arm/cpu/armv8/sec_firmware.c index 4afa3ad..f460cca 100644 --- a/arch/arm/cpu/armv8/sec_firmware.c +++ b/arch/arm/cpu/armv8/sec_firmware.c @@ -232,6 +232,59 @@ unsigned int sec_firmware_support_psci_version(void) #endif
/*
- Check with sec_firmware if it supports random number generation
- via HW RNG
- The return value will be true if it is supported
- */
+bool sec_firmware_support_hwrng(void) +{
uint8_t rand[8];if (sec_firmware_addr & SEC_FIRMWARE_RUNNING) {if (!sec_firmware_get_random(rand, 8))return true;}return false;+}
+/*
- sec_firmware_get_random - Initialize the SEC Firmware
- @rand: random number buffer to be filled
- @bytes: Number of bytes of random number to be supported
- @eret: -1 in case of error, 0 for success
- */
+int sec_firmware_get_random(uint8_t *rand, int bytes) +{
unsigned long long num;struct pt_regs regs;int param1;if (!bytes || bytes > 8) {printf("Max Random bytes genration supported is 8\n");return -1;}+#define SIP_RNG_64 0xC200FF11
regs.regs[0] = SIP_RNG_64;if (bytes <= 4)param1 = 0;elseparam1 = 1;regs.regs[1] = param1;smc_call(®s);if (regs.regs[0])return -1;num = regs.regs[1];memcpy(rand, &num, bytes);return 0;+}
+/*
- sec_firmware_init - Initialize the SEC Firmware
- @sec_firmware_img: the SEC Firmware image address
- @eret_hold_l: the address to hold exception return address low
diff --git a/arch/arm/include/asm/armv8/sec_firmware.h b/arch/arm/include/asm/armv8/sec_firmware.h index bc1d97d..1dc547a 100644 --- a/arch/arm/include/asm/armv8/sec_firmware.h +++ b/arch/arm/include/asm/armv8/sec_firmware.h @@ -8,10 +8,13 @@ #define __SEC_FIRMWARE_H_
#define PSCI_INVALID_VER 0xffffffff +#define SEC_JR3_OFFSET 0x40000
int sec_firmware_init(const void *, u32 *, u32 *); int _sec_firmware_entry(const void *, u32 *, u32 *); bool sec_firmware_is_valid(const void *); +bool sec_firmware_support_hwrng(void); +int sec_firmware_get_random(uint8_t *rand, int bytes); #ifdef CONFIG_SEC_FIRMWARE_ARMV8_PSCI unsigned int sec_firmware_support_psci_version(void); unsigned int _sec_firmware_support_psci_version(void); @@ -22,4 +25,10 @@ static inline unsigned int sec_firmware_support_psci_version(void) } #endif
+static inline unsigned int sec_firmware_used_jobring_offset(void) +{
return SEC_JR3_OFFSET;+}
#endif /* __SEC_FIRMWARE_H_ */
2.7.4
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
-----Original Message----- From: Peter Robinson [mailto:pbrobinson@gmail.com] Sent: Monday, May 15, 2017 6:18 PM To: Ruchika Gupta ruchika.gupta@nxp.com Cc: u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Subject: Re: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr- seed
On Sat, May 13, 2017 at 1:07 AM, Ruchika Gupta ruchika.gupta@nxp.com wrote:
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
Is that functionality generic that it can be consumed by other devices?
Sec firmware is proprietary firmware which provides this random seed using HW engine on NXP devices. Other devices would need to generate their own random seed to be passed as this property.
Ruchika
-----Original Message----- From: Peter Robinson [mailto:pbrobinson@gmail.com] Sent: Monday, May 15, 2017 6:18 PM To: Ruchika Gupta ruchika.gupta@nxp.com Cc: u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Subject: Re: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr- seed
On Sat, May 13, 2017 at 1:07 AM, Ruchika Gupta ruchika.gupta@nxp.com wrote:
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
Is that functionality generic that it can be consumed by other devices?
Sec firmware is proprietary firmware which provides this random seed using HW engine on NXP devices. Other devices would need to generate their own random seed to be passed as this property.
yes, my point was more shouldn't there be a generic framework for this as the functionality isn't unique to the HW engine on the NXP devices, even if the HW is, and kASLR is a pretty generic requirement.
I know Tom, Alexander, myself and others discussed such a thing at ELC in Portland in February and if memory serves providing that seed via the uefi boot services (I may have that terminology wrong) for ARMv8. Tom/Alexander do you remember the details of that conversation, know if anyone was working on it?
Peter
On 17.05.17 10:17, Peter Robinson wrote:
-----Original Message----- From: Peter Robinson [mailto:pbrobinson@gmail.com] Sent: Monday, May 15, 2017 6:18 PM To: Ruchika Gupta ruchika.gupta@nxp.com Cc: u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Subject: Re: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr- seed
On Sat, May 13, 2017 at 1:07 AM, Ruchika Gupta ruchika.gupta@nxp.com wrote:
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
Is that functionality generic that it can be consumed by other devices?
Sec firmware is proprietary firmware which provides this random seed using HW engine on NXP devices. Other devices would need to generate their own random seed to be passed as this property.
yes, my point was more shouldn't there be a generic framework for this as the functionality isn't unique to the HW engine on the NXP devices, even if the HW is, and kASLR is a pretty generic requirement.
I know Tom, Alexander, myself and others discussed such a thing at ELC in Portland in February and if memory serves providing that seed via the uefi boot services (I may have that terminology wrong) for ARMv8. Tom/Alexander do you remember the details of that conversation, know if anyone was working on it?
I think it's perfectly fine to have a proprietary implementation in EL3/EL1s that uses whatever hardware provides to fetch a random number. I'm surprised you provide that number to Linux using dt though.
So far, I was under the impression that the preferred path for kASLR is to use the EFI_RNG_PROTOCOL protocol from the EFI stub. You are obviously more than welcome to back that protocol implementation in an NXP proprietary fashion with home-grown smc calls.
Let me CC Ard to clarify.
Alex
On 17 May 2017 at 09:23, Alexander Graf agraf@suse.de wrote:
On 17.05.17 10:17, Peter Robinson wrote:
-----Original Message----- From: Peter Robinson [mailto:pbrobinson@gmail.com] Sent: Monday, May 15, 2017 6:18 PM To: Ruchika Gupta ruchika.gupta@nxp.com Cc: u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Subject: Re: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr- seed
On Sat, May 13, 2017 at 1:07 AM, Ruchika Gupta ruchika.gupta@nxp.com wrote:
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
Is that functionality generic that it can be consumed by other devices?
Sec firmware is proprietary firmware which provides this random seed using HW engine on NXP devices. Other devices would need to generate their own random seed to be passed as this property.
yes, my point was more shouldn't there be a generic framework for this as the functionality isn't unique to the HW engine on the NXP devices, even if the HW is, and kASLR is a pretty generic requirement.
I know Tom, Alexander, myself and others discussed such a thing at ELC in Portland in February and if memory serves providing that seed via the uefi boot services (I may have that terminology wrong) for ARMv8. Tom/Alexander do you remember the details of that conversation, know if anyone was working on it?
I think it's perfectly fine to have a proprietary implementation in EL3/EL1s that uses whatever hardware provides to fetch a random number. I'm surprised you provide that number to Linux using dt though.
So far, I was under the impression that the preferred path for kASLR is to use the EFI_RNG_PROTOCOL protocol from the EFI stub. You are obviously more than welcome to back that protocol implementation in an NXP proprietary fashion with home-grown smc calls.
Let me CC Ard to clarify.
/chosen/kaslr-seed is used by the EFI stub to communicate a KASLR specific random seed to the early boot code, which is difficult to do any other way. It is internal ABI, but given that the contents of /chosen are unregulated, there is nothing preventing you from putting a KASLR seed there if you are not booting via EFI.
However, /chosen/kaslr-seed is *not* the only random seed the EFI stub retrieves from the platform via the EFI_RNG_PROTOCOL. There is also: - the physical randomization seed, which affects where the EFI stub relocates the kernel in physical memory, - the LINUX_RNG EFI configuration table, which passes a seed to the /dev/random routines so we have some entropy before devices are probed, - randomization of the virtual placement of the UEFI runtime services code/data regions.
IOW, EFI_RNG_PROTOCOL is used in four different ways, and populating /chosen/kaslr-seed directly only gives you one of those. If you are not booting via EFI, there is no difference given that these other three applications are not active anyway, but for EFI(-compatible) boot, we should implement the EFI_RNG_PROTOCOL instead.
On Wed, May 17, 2017 at 02:14:28PM +0100, Ard Biesheuvel wrote:
On 17 May 2017 at 09:23, Alexander Graf agraf@suse.de wrote:
On 17.05.17 10:17, Peter Robinson wrote:
-----Original Message----- From: Peter Robinson [mailto:pbrobinson@gmail.com] Sent: Monday, May 15, 2017 6:18 PM To: Ruchika Gupta ruchika.gupta@nxp.com Cc: u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Subject: Re: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr- seed
On Sat, May 13, 2017 at 1:07 AM, Ruchika Gupta ruchika.gupta@nxp.com wrote:
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
Is that functionality generic that it can be consumed by other devices?
Sec firmware is proprietary firmware which provides this random seed using HW engine on NXP devices. Other devices would need to generate their own random seed to be passed as this property.
yes, my point was more shouldn't there be a generic framework for this as the functionality isn't unique to the HW engine on the NXP devices, even if the HW is, and kASLR is a pretty generic requirement.
I know Tom, Alexander, myself and others discussed such a thing at ELC in Portland in February and if memory serves providing that seed via the uefi boot services (I may have that terminology wrong) for ARMv8. Tom/Alexander do you remember the details of that conversation, know if anyone was working on it?
I think it's perfectly fine to have a proprietary implementation in EL3/EL1s that uses whatever hardware provides to fetch a random number. I'm surprised you provide that number to Linux using dt though.
So far, I was under the impression that the preferred path for kASLR is to use the EFI_RNG_PROTOCOL protocol from the EFI stub. You are obviously more than welcome to back that protocol implementation in an NXP proprietary fashion with home-grown smc calls.
Let me CC Ard to clarify.
/chosen/kaslr-seed is used by the EFI stub to communicate a KASLR specific random seed to the early boot code, which is difficult to do any other way. It is internal ABI, but given that the contents of /chosen are unregulated, there is nothing preventing you from putting a KASLR seed there if you are not booting via EFI.
However, /chosen/kaslr-seed is *not* the only random seed the EFI stub retrieves from the platform via the EFI_RNG_PROTOCOL. There is also:
- the physical randomization seed, which affects where the EFI stub
relocates the kernel in physical memory,
- the LINUX_RNG EFI configuration table, which passes a seed to the
/dev/random routines so we have some entropy before devices are probed,
- randomization of the virtual placement of the UEFI runtime services
code/data regions.
IOW, EFI_RNG_PROTOCOL is used in four different ways, and populating /chosen/kaslr-seed directly only gives you one of those. If you are not booting via EFI, there is no difference given that these other three applications are not active anyway, but for EFI(-compatible) boot, we should implement the EFI_RNG_PROTOCOL instead.
So it would be best, long term, to implement EFI_RNG_PROTOCOL so that anyone using bootefi (Linux, GRUB, OpenBSD, etc) can get what randomness they like, but it's not a problem for now to ad-hoc populate /chosen/kaslr-seed as possible. Yes? Thanks!
Date: Wed, 17 May 2017 17:57:04 -0400 From: Tom Rini trini@konsulko.com
On Wed, May 17, 2017 at 02:14:28PM +0100, Ard Biesheuvel wrote:
On 17 May 2017 at 09:23, Alexander Graf agraf@suse.de wrote:
On 17.05.17 10:17, Peter Robinson wrote:
-----Original Message----- From: Peter Robinson [mailto:pbrobinson@gmail.com] Sent: Monday, May 15, 2017 6:18 PM To: Ruchika Gupta ruchika.gupta@nxp.com Cc: u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Subject: Re: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kas=
lr-
seed
On Sat, May 13, 2017 at 1:07 AM, Ruchika Gupta <ruchika.gupta@nxp.co=
m>
wrote: > > kASLR support in kernel requires a random number to be passed via > chosen/kaslr-seed propert. sec_firmware generates this random seed > which can then be passed in the device tree node
Is that functionality generic that it can be consumed by other devic=
es?
Sec firmware is proprietary firmware which provides this random seed using HW engine on NXP devices. Other devices would need to generate their own random seed to be pass=
ed
as this property.
yes, my point was more shouldn't there be a generic framework for this as the functionality isn't unique to the HW engine on the NXP devices, even if the HW is, and kASLR is a pretty generic requirement.
I know Tom, Alexander, myself and others discussed such a thing at ELC in Portland in February and if memory serves providing that seed via the uefi boot services (I may have that terminology wrong) for ARMv8. Tom/Alexander do you remember the details of that conversation, know if anyone was working on it?
I think it's perfectly fine to have a proprietary implementation in EL3=
/EL1s
that uses whatever hardware provides to fetch a random number. I'm surp=
rised
you provide that number to Linux using dt though.
So far, I was under the impression that the preferred path for kASLR is=
to
use the EFI_RNG_PROTOCOL protocol from the EFI stub. You are obviously =
more
than welcome to back that protocol implementation in an NXP proprietary fashion with home-grown smc calls.
Let me CC Ard to clarify.
=20 /chosen/kaslr-seed is used by the EFI stub to communicate a KASLR specific random seed to the early boot code, which is difficult to do any other way. It is internal ABI, but given that the contents of /chosen are unregulated, there is nothing preventing you from putting a KASLR seed there if you are not booting via EFI. =20 However, /chosen/kaslr-seed is *not* the only random seed the EFI stub retrieves from the platform via the EFI_RNG_PROTOCOL. There is also:
- the physical randomization seed, which affects where the EFI stub
relocates the kernel in physical memory,
- the LINUX_RNG EFI configuration table, which passes a seed to the
/dev/random routines so we have some entropy before devices are probed,
- randomization of the virtual placement of the UEFI runtime services
code/data regions. =20 IOW, EFI_RNG_PROTOCOL is used in four different ways, and populating /chosen/kaslr-seed directly only gives you one of those. If you are not booting via EFI, there is no difference given that these other three applications are not active anyway, but for EFI(-compatible) boot, we should implement the EFI_RNG_PROTOCOL instead.
So it would be best, long term, to implement EFI_RNG_PROTOCOL so that anyone using bootefi (Linux, GRUB, OpenBSD, etc) can get what randomness they like, but it's not a problem for now to ad-hoc populate /chosen/kaslr-seed as possible. Yes? Thanks!
Right; Perfect is the enemy of good enough ;)
Having driver code in the tree will help implementing EFI_RNG_PROTOCOL support. Since this is someting that is important to us, I actually might actually work on in the near future.
From: Peter Robinson pbrobinson@gmail.com Date: Wed, 17 May 2017 09:17:47 +0100
-----Original Message----- From: Peter Robinson [mailto:pbrobinson@gmail.com] Sent: Monday, May 15, 2017 6:18 PM To: Ruchika Gupta ruchika.gupta@nxp.com Cc: u-boot@lists.denx.de; sun.york@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Subject: Re: [U-Boot] [PATCH] ARMv8/sec_firmware : Update chosen/kaslr- seed
On Sat, May 13, 2017 at 1:07 AM, Ruchika Gupta ruchika.gupta@nxp.com wrote:
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node
Is that functionality generic that it can be consumed by other devices?
Sec firmware is proprietary firmware which provides this random seed using HW engine on NXP devices. Other devices would need to generate their own random seed to be passed as this property.
yes, my point was more shouldn't there be a generic framework for this as the functionality isn't unique to the HW engine on the NXP devices, even if the HW is, and kASLR is a pretty generic requirement.
I know Tom, Alexander, myself and others discussed such a thing at ELC in Portland in February and if memory serves providing that seed via the uefi boot services (I may have that terminology wrong) for ARMv8. Tom/Alexander do you remember the details of that conversation, know if anyone was working on it?
Having an implementation of EFI_RNG_PROTOCOL in U-Boot would be great. On OpenBSD we would defenitely use that to have our ARM bootloaders initialize the kernel .openbsd.randomdata[1] segment.
[1] https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/libexec/ld.so/SPECS.randomdata...
participants (7)
-
Alexander Graf -
Ard Biesheuvel -
Mark Kettenis -
Peter Robinson -
Poonam Aggrwal -
Ruchika Gupta -
Tom Rini