IDCODE0 are required to find the bank addr read/write commands, as these commands are specific to manufacture id hence moved manu id code macros to CONFIG_SPI_FLASH_BAR.

Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com --- drivers/mtd/spi/spi_flash_internal.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h index af1afa9..20eed7c 100644 --- a/drivers/mtd/spi/spi_flash_internal.h +++ b/drivers/mtd/spi/spi_flash_internal.h @@ -31,12 +31,12 @@

#define SPI_FLASH_16MB_BOUN 0x1000000

+#ifdef CONFIG_SPI_FLASH_BAR /* Manufacture ID's */ -#define SPI_FLASH_SPANSION_IDCODE0 0x01 -#define SPI_FLASH_STMICRO_IDCODE0 0x20 -#define SPI_FLASH_WINBOND_IDCODE0 0xef +# define SPI_FLASH_SPANSION_IDCODE0 0x01 +# define SPI_FLASH_STMICRO_IDCODE0 0x20 +# define SPI_FLASH_WINBOND_IDCODE0 0xef

-#ifdef CONFIG_SPI_FLASH_BAR /* Bank addr access commands */ # define CMD_BANKADDR_BRWR 0x17 # define CMD_BANKADDR_BRRD 0x16