[U-Boot] [PATCH v1 1/3] OMAP3: add missing gpio clock init and fix NAND SPL for mcx board
Patch contains the same fixes as commit 4b9b2c300a23ca4a85811918dc92e822a9571a87 (missing CONFIG_OMAP3_GPIO_2) and commit f9095aac793aa8917ab9b915c5d449e6dc8d3d30 (missing CONFIG_SPL_NAND_SOFTECC). Same issues are relevant for the mcx board, too.
Signed-off-by: Stefano Babic sbabic@denx.de
---
include/configs/mcx.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/mcx.h b/include/configs/mcx.h index dcd29ce..209c2bb 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -98,6 +98,7 @@
/* EHCI */ #define CONFIG_USB_STORAGE +#define CONFIG_OMAP3_GPIO_2 #define CONFIG_OMAP3_GPIO_5 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP @@ -395,6 +396,7 @@ #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW +#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
New hardware version cannot recognize the SD-Card because the SYS_NRESWARM, set as GPIO, does not guarantee the required reset time. Change the pin function back to enable the SYS_NRESWARM signal driven by the SOC.
Signed-off-by: Stefano Babic sbabic@denx.de ---
board/htkw/mcx/mcx.h | 2 -- 1 file changed, 2 deletions(-)
diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h index 703dbec..17c122c 100644 --- a/board/htkw/mcx/mcx.h +++ b/board/htkw/mcx/mcx.h @@ -325,8 +325,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_32K), (IEN | PTD | EN | M4)) \ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(SYS_NIRQ), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(SYS_NRESWARM), (IEN | PTU | DIS | M4)) \ - /* SYS_nRESWARM */\ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) \ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) \ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) \
On Fri, Feb 14, 2014 at 12:51:26PM +0100, Stefano Babic wrote:
New hardware version cannot recognize the SD-Card because the SYS_NRESWARM, set as GPIO, does not guarantee the required reset time. Change the pin function back to enable the SYS_NRESWARM signal driven by the SOC.
Signed-off-by: Stefano Babic sbabic@denx.de
Applied to u-boot-ti/master, thanks!
Patch allows to load a script at the startup from MMC.
Signed-off-by: Stefano Babic sbabic@denx.de ---
include/configs/mcx.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 209c2bb..7c5c2f4 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -264,10 +264,9 @@ "${mtdparts} " \ "vram=6M omapfb.vram=1:2M,2:2M,3:2M " \ "omapdss.def_disp=lcd;" \ - "bootm 0x82000000 0x84000000\0" - -#define CONFIG_BOOTCOMMAND \ - "run nandboot" + "bootm 0x82000000 0x84000000\0" \ + "bootcmd=mmc rescan;if fatload mmc 0 82000000 loadbootscr.scr;" \ + "then source 82000000;else run nandboot;fi\0"
#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING
On Fri, Feb 14, 2014 at 12:51:27PM +0100, Stefano Babic wrote:
Patch allows to load a script at the startup from MMC.
Signed-off-by: Stefano Babic sbabic@denx.de
Applied to u-boot-ti/master, thanks!
On Fri, Feb 14, 2014 at 12:51:25PM +0100, Stefano Babic wrote:
Patch contains the same fixes as commit 4b9b2c300a23ca4a85811918dc92e822a9571a87 (missing CONFIG_OMAP3_GPIO_2) and commit f9095aac793aa8917ab9b915c5d449e6dc8d3d30 (missing CONFIG_SPL_NAND_SOFTECC). Same issues are relevant for the mcx board, too.
Signed-off-by: Stefano Babic sbabic@denx.de
Applied to u-boot-ti/master, thanks!
participants (2)
-
Stefano Babic -
Tom Rini