Until now this defined to be 512KB and the total binary size actually was on the edge of this limit. Most of the powerpc boards have thus moved to 768KB.

Since on the current kmp204x boards there is 1MB reserved for u-boot on the SPI boot flash, there is no problem to set the limit to 768KB as well to be on line with the other powerpc boards and to eventually configure in some additional features (and binary size) to u-boot.

Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com ---

include/configs/km/kmp204x-common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index a0f9d29..c5c9dfc 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -11,7 +11,7 @@ #define CONFIG_PHYS_64BIT #define CONFIG_PPC_P2041

-#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#define CONFIG_SYS_TEXT_BASE 0xfff40000

#define CONFIG_KM_DEF_NETDEV "netdev=eth0\0"

@@ -235,7 +235,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)

/* Serial Port - controlled on board with jumper J8