Thank you Yuli. Thank you very much :-)

Regards, Nishant

-----Original Message----- From: Yuli Barcohen yuli@arabellasw.com To: "Nishant Galange" nishant.subs@myrealbox.com Date: Tue, 23 Nov 2004 11:58:55 +0200 Subject: Re: [U-Boot-Users] start.S code snippet doubt

This code fixes incorrect BADDR configuration caused by wrong HRCW supplied by BCSR (FPGA) on some MPC8260ADS boards. It's configured as if there was L2 cache so that lower address lines are not functional (64-bit data bus). Without this code, such a board can't start from 32-bit flash SIMM. This code is for MPC8260ADS only so there should not be any problem.