[U-Boot] Improvements to Rock960
Hi,
Some improvements to the Rock960, tested locally on a v1.2 board. Most are self explanatory in the patches.
The usb3 enablement requires the dwc3 patch series [1] that Mark posted to actually work but is completely indendent of it.
Peter
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=116911
Sync the dts files for the Rock960 boards from Linux to get the latest changes and fixes for the devices.
Signed-off-by: Peter Robinson pbrobinson@gmail.com --- arch/arm/dts/rk3399-ficus.dts | 92 ++++++++++++- arch/arm/dts/rk3399-rock960.dts | 91 +++++++++++- arch/arm/dts/rk3399-rock960.dtsi | 229 +++++++++++++++++++++++++------ 3 files changed, 366 insertions(+), 46 deletions(-)
diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts index 4b2dd82b67..6b059bd7a0 100644 --- a/arch/arm/dts/rk3399-ficus.dts +++ b/arch/arm/dts/rk3399-ficus.dts @@ -23,6 +23,52 @@ clock-output-names = "clkin_gmac"; #clock-cells = <0>; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>, + <&user_led4>, <&wlan_led>, <&bt_led>; + + user_led1 { + label = "red:user1"; + gpios = <&gpio4 25 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "red:user2"; + gpios = <&gpio4 26 0>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "red:user3"; + gpios = <&gpio4 30 0>; + linux,default-trigger = "mmc1"; + }; + + user_led4 { + label = "red:user4"; + gpios = <&gpio1 0 0>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan_active_led { + label = "red:wlan"; + gpios = <&gpio1 1 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "red:bt"; + gpios = <&gpio1 4 0>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; };
&gmac { @@ -49,23 +95,63 @@ gmac { rgmii_sleep_pins: rgmii-sleep-pins { rockchip,pins = - <3 15 RK_FUNC_GPIO &pcfg_output_low>; + <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; }; };
pcie { pcie_drv: pcie-drv { rockchip,pins = - <1 24 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; };
usb2 { host_vbus_drv: host-vbus-drv { rockchip,pins = - <4 27 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + leds { + user_led1: user_led1 { + rockchip,pins = + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led2: user_led2 { + rockchip,pins = + <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led3: user_led3 { + rockchip,pins = + <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led4: user_led4 { + rockchip,pins = + <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_led: wlan_led { + rockchip,pins = + <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_led: bt_led { + rockchip,pins = + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; };
&vcc3v3_pcie { diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts index 7e06bc97e5..12285c51cc 100644 --- a/arch/arm/dts/rk3399-rock960.dts +++ b/arch/arm/dts/rk3399-rock960.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (C) 2018 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org + * Copyright (c) 2018 Linaro Ltd. */
/dts-v1/; @@ -13,6 +13,53 @@ chosen { stdout-path = "serial2:1500000n8"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>, + <&user_led4>, <&wlan_led>, <&bt_led>; + + user_led1 { + label = "green:user1"; + gpios = <&gpio4 RK_PC2 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "green:user2"; + gpios = <&gpio4 RK_PC6 0>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "green:user3"; + gpios = <&gpio4 RK_PD0 0>; + linux,default-trigger = "mmc1"; + }; + + user_led4 { + label = "green:user4"; + gpios = <&gpio4 RK_PD4 0>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&gpio4 RK_PD5 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "blue:bt"; + gpios = <&gpio4 RK_PD6 0>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + };
&pcie0 { @@ -20,6 +67,38 @@ };
&pinctrl { + leds { + user_led1: user_led1 { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led2: user_led2 { + rockchip,pins = + <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led3: user_led3 { + rockchip,pins = + <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led4: user_led4 { + rockchip,pins = + <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_led: wlan_led { + rockchip,pins = + <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_led: bt_led { + rockchip,pins = + <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_drv: pcie-drv { rockchip,pins = @@ -35,6 +114,14 @@ }; };
+&usbdrd_dwc3_0 { + dr_mode = "otg"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + &vcc3v3_pcie { gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi index 51644d6d02..c7d48d41e1 100644 --- a/arch/arm/dts/rk3399-rock960.dtsi +++ b/arch/arm/dts/rk3399-rock960.dtsi @@ -1,13 +1,32 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd. * Copyright (c) 2018 Linaro Ltd. */
-#include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/pinctrl/rockchip.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi"
/ { + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + vcc1v8_s0: vcc1v8-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s0"; @@ -16,12 +35,13 @@ regulator-always-on; };
- vcc_sys: vcc-sys { + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; + regulator-name = "vcc5v0_sys"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; + vin-supply = <&vcc12v_dcin>; };
vcc3v3_sys: vcc3v3-sys { @@ -30,7 +50,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; };
vcc3v3_pcie: vcc3v3-pcie-regulator { @@ -54,20 +74,8 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 0>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; }; - };
&cpu_l0 { @@ -98,7 +106,19 @@ status = "okay"; };
+&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { status = "okay"; };
@@ -118,7 +138,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; status = "okay";
regulator-state-mem { @@ -136,7 +156,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; }; @@ -154,16 +174,16 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2";
- vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; vcc12-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_1v8>;
@@ -344,6 +364,10 @@ status = "okay"; };
+&i2s2 { + status = "okay"; +}; + &io_domains { bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ @@ -370,45 +394,92 @@ };
&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>; + <4 RK_PB0 1 &pcfg_pull_up_8ma>; };
sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>; + <4 RK_PB0 1 &pcfg_pull_up_8ma>, + <4 RK_PB1 1 &pcfg_pull_up_8ma>, + <4 RK_PB2 1 &pcfg_pull_up_8ma>, + <4 RK_PB3 1 &pcfg_pull_up_8ma>; };
sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>; + <4 RK_PB4 1 &pcfg_pull_none_18ma>; };
sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>; + <4 RK_PB5 1 &pcfg_pull_up_8ma>; + }; + }; + + sdio0 { + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + <2 RK_PC4 1 &pcfg_pull_up_20ma>, + <2 RK_PC5 1 &pcfg_pull_up_20ma>, + <2 RK_PC6 1 &pcfg_pull_up_20ma>, + <2 RK_PC7 1 &pcfg_pull_up_20ma>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = + <2 RK_PD0 1 &pcfg_pull_up_20ma>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = + <2 RK_PD1 1 &pcfg_pull_none_20ma>; }; };
pmic { pmic_int_l: pmic-int-l { rockchip,pins = - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; };
vsel1_gpio: vsel1-gpio { rockchip,pins = - <1 17 RK_FUNC_GPIO &pcfg_pull_down>; + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; };
vsel2_gpio: vsel2-gpio { rockchip,pins = - <1 14 RK_FUNC_GPIO &pcfg_pull_down>; + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; @@ -421,6 +492,32 @@ status = "okay"; };
+&sdio0 { + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdhci { bus-width = <8>; mmc-hs400-1_8v; @@ -445,16 +542,42 @@ status = "okay"; };
+&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + rockchip,hw-tshut-temp = <110000>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; };
&uart2 { status = "okay"; };
+&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + &u2phy0 { status = "okay"; }; @@ -497,10 +620,34 @@ status = "okay"; };
+&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; +}; + &vopb { status = "okay"; };
+&vopb_mmu { + status = "okay"; +}; + &vopl { status = "okay"; }; + +&vopl_mmu { + status = "okay"; +};
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
Sync the dts files for the Rock960 boards from Linux to get the latest changes and fixes for the devices.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
arch/arm/dts/rk3399-ficus.dts | 92 ++++++++++++- arch/arm/dts/rk3399-rock960.dts | 91 +++++++++++- arch/arm/dts/rk3399-rock960.dtsi | 229 +++++++++++++++++++++++++------ 3 files changed, 366 insertions(+), 46 deletions(-)
diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts index 4b2dd82b67..6b059bd7a0 100644 --- a/arch/arm/dts/rk3399-ficus.dts +++ b/arch/arm/dts/rk3399-ficus.dts @@ -23,6 +23,52 @@ clock-output-names = "clkin_gmac"; #clock-cells = <0>; };
- leds {
compatible = "gpio-leds";pinctrl-names = "default";pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,<&user_led4>, <&wlan_led>, <&bt_led>;user_led1 {label = "red:user1";gpios = <&gpio4 25 0>;linux,default-trigger = "heartbeat";};user_led2 {label = "red:user2";gpios = <&gpio4 26 0>;linux,default-trigger = "mmc0";};user_led3 {label = "red:user3";gpios = <&gpio4 30 0>;linux,default-trigger = "mmc1";};user_led4 {label = "red:user4";gpios = <&gpio1 0 0>;panic-indicator;linux,default-trigger = "none";};wlan_active_led {label = "red:wlan";gpios = <&gpio1 1 0>;linux,default-trigger = "phy0tx";default-state = "off";};bt_active_led {label = "red:bt";gpios = <&gpio1 4 0>;linux,default-trigger = "hci0-power";default-state = "off";};- };
};
&gmac { @@ -49,23 +95,63 @@ gmac { rgmii_sleep_pins: rgmii-sleep-pins { rockchip,pins =
<3 15 RK_FUNC_GPIO &pcfg_output_low>;
<3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;}; };
pcie { pcie_drv: pcie-drv { rockchip,pins =
<1 24 RK_FUNC_GPIO &pcfg_pull_none>;
<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; };};
usb2 { host_vbus_drv: host-vbus-drv { rockchip,pins =
<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
<4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;- leds {
user_led1: user_led1 {rockchip,pins =<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;};user_led2: user_led2 {rockchip,pins =<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;};user_led3: user_led3 {rockchip,pins =<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;};user_led4: user_led4 {rockchip,pins =<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;};wlan_led: wlan_led {rockchip,pins =<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;};bt_led: bt_led {rockchip,pins =<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;};- };
+};
+&usbdrd_dwc3_0 {
- dr_mode = "host";
+};
+&usbdrd_dwc3_1 {
- dr_mode = "host";
};
&vcc3v3_pcie { diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts index 7e06bc97e5..12285c51cc 100644 --- a/arch/arm/dts/rk3399-rock960.dts +++ b/arch/arm/dts/rk3399-rock960.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /*
- Copyright (C) 2018 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
*/
- Copyright (c) 2018 Linaro Ltd.
/dts-v1/; @@ -13,6 +13,53 @@ chosen { stdout-path = "serial2:1500000n8"; };
- leds {
compatible = "gpio-leds";pinctrl-names = "default";pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,<&user_led4>, <&wlan_led>, <&bt_led>;user_led1 {label = "green:user1";gpios = <&gpio4 RK_PC2 0>;linux,default-trigger = "heartbeat";};user_led2 {label = "green:user2";gpios = <&gpio4 RK_PC6 0>;linux,default-trigger = "mmc0";};user_led3 {label = "green:user3";gpios = <&gpio4 RK_PD0 0>;linux,default-trigger = "mmc1";};user_led4 {label = "green:user4";gpios = <&gpio4 RK_PD4 0>;panic-indicator;linux,default-trigger = "none";};wlan_active_led {label = "yellow:wlan";gpios = <&gpio4 RK_PD5 0>;linux,default-trigger = "phy0tx";default-state = "off";};bt_active_led {label = "blue:bt";gpios = <&gpio4 RK_PD6 0>;linux,default-trigger = "hci0-power";default-state = "off";};- };
};
&pcie0 { @@ -20,6 +67,38 @@ };
&pinctrl {
- leds {
user_led1: user_led1 {rockchip,pins =<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;};user_led2: user_led2 {rockchip,pins =<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;};user_led3: user_led3 {rockchip,pins =<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;};user_led4: user_led4 {rockchip,pins =<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;};wlan_led: wlan_led {rockchip,pins =<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;};bt_led: bt_led {rockchip,pins =<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- pcie { pcie_drv: pcie-drv { rockchip,pins =
@@ -35,6 +114,14 @@ }; };
+&usbdrd_dwc3_0 {
- dr_mode = "otg";
+};
+&usbdrd_dwc3_1 {
- dr_mode = "host";
+};
&vcc3v3_pcie { gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi index 51644d6d02..c7d48d41e1 100644 --- a/arch/arm/dts/rk3399-rock960.dtsi +++ b/arch/arm/dts/rk3399-rock960.dtsi @@ -1,13 +1,32 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /*
- Copyright (c) 2018 Collabora Ltd.
*/
- Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
- Copyright (c) 2018 Linaro Ltd.
-#include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/pinctrl/rockchip.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi"
/ {
- sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";clocks = <&rk808 1>;clock-names = "ext_clock";pinctrl-names = "default";pinctrl-0 = <&wifi_enable_h>;reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;- };
- vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";regulator-name = "vcc12v_dcin";regulator-min-microvolt = <12000000>;regulator-max-microvolt = <12000000>;regulator-always-on;regulator-boot-on;- };
- vcc1v8_s0: vcc1v8-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s0";
@@ -16,12 +35,13 @@ regulator-always-on; };
- vcc_sys: vcc-sys {
- vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-name = "vcc5v0_sys";regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on;
vin-supply = <&vcc12v_dcin>;};
vcc3v3_sys: vcc3v3-sys {
@@ -30,7 +50,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on;
vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;};
vcc3v3_pcie: vcc3v3-pcie-regulator {
@@ -54,20 +74,8 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on;
vin-supply = <&vcc_sys>;- };
- vdd_log: vdd-log {
compatible = "pwm-regulator";pwms = <&pwm2 0 25000 0>;regulator-name = "vdd_log";regulator-min-microvolt = <800000>;regulator-max-microvolt = <1400000>;regulator-always-on;regulator-boot-on;vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;
};
&cpu_l0 { @@ -98,7 +106,19 @@ status = "okay"; };
+&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
+};
&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
+};
+&hdmi_sound { status = "okay"; };
@@ -118,7 +138,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on;
vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;status = "okay";
regulator-state-mem {
@@ -136,7 +156,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on;
vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;@@ -154,16 +174,16 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2";
vcc1-supply = <&vcc_sys>;vcc2-supply = <&vcc_sys>;vcc3-supply = <&vcc_sys>;vcc4-supply = <&vcc_sys>;vcc6-supply = <&vcc_sys>;vcc7-supply = <&vcc_sys>;
vcc1-supply = <&vcc5v0_sys>;vcc2-supply = <&vcc5v0_sys>;vcc3-supply = <&vcc5v0_sys>;vcc4-supply = <&vcc5v0_sys>;vcc6-supply = <&vcc5v0_sys>;vcc7-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc_sys>;vcc10-supply = <&vcc_sys>;vcc11-supply = <&vcc_sys>;
vcc9-supply = <&vcc5v0_sys>;vcc10-supply = <&vcc5v0_sys>;vcc11-supply = <&vcc5v0_sys>;@@ -344,6 +364,10 @@ status = "okay"; };
+&i2s2 {
status = "okay";+};
&io_domains { bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ @@ -370,45 +394,92 @@ };
&pinctrl {
- bt {
bt_enable_h: bt-enable-h {rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;};bt_host_wake_l: bt-host-wake-l {rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;};bt_wake_l: bt-wake-l {rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins =
<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
<4 RK_PB0 1 &pcfg_pull_up_8ma>;};
sdmmc_bus4: sdmmc-bus4 { rockchip,pins =
<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,<4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,<4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,<4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
<4 RK_PB0 1 &pcfg_pull_up_8ma>,<4 RK_PB1 1 &pcfg_pull_up_8ma>,<4 RK_PB2 1 &pcfg_pull_up_8ma>,<4 RK_PB3 1 &pcfg_pull_up_8ma>;};
sdmmc_clk: sdmmc-clk { rockchip,pins =
<4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
<4 RK_PB4 1 &pcfg_pull_none_18ma>;};
sdmmc_cmd: sdmmc-cmd { rockchip,pins =
<4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
<4 RK_PB5 1 &pcfg_pull_up_8ma>;};};
sdio0 {
sdio0_bus4: sdio0-bus4 {rockchip,pins =<2 RK_PC4 1 &pcfg_pull_up_20ma>,<2 RK_PC5 1 &pcfg_pull_up_20ma>,<2 RK_PC6 1 &pcfg_pull_up_20ma>,<2 RK_PC7 1 &pcfg_pull_up_20ma>;};sdio0_cmd: sdio0-cmd {rockchip,pins =<2 RK_PD0 1 &pcfg_pull_up_20ma>;};sdio0_clk: sdio0-clk {rockchip,pins =<2 RK_PD1 1 &pcfg_pull_none_20ma>;}; };
pmic { pmic_int_l: pmic-int-l { rockchip,pins =
<1 21 RK_FUNC_GPIO &pcfg_pull_up>;
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;};
vsel1_gpio: vsel1-gpio { rockchip,pins =
<1 17 RK_FUNC_GPIO &pcfg_pull_down>;
<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;};
vsel2_gpio: vsel2-gpio { rockchip,pins =
<1 14 RK_FUNC_GPIO &pcfg_pull_down>;
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;};- };
- sdio-pwrseq {
wifi_enable_h: wifi-enable-h {rockchip,pins =<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- wifi {
wifi_host_wake_l: wifi-host-wake-l {rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;}; @@ -421,6 +492,32 @@ status = "okay"; };
+&sdio0 {
- bus-width = <4>;
- clock-frequency = <50000000>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
- brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";reg = <1>;interrupt-parent = <&gpio0>;interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;interrupt-names = "host-wake";pinctrl-names = "default";pinctrl-0 = <&wifi_host_wake_l>;- };
+};
&sdhci { bus-width = <8>; mmc-hs400-1_8v; @@ -445,16 +542,42 @@ status = "okay"; };
+&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- rockchip,hw-tshut-temp = <110000>;
- status = "okay";
+};
&uart0 { pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "okay";
- bluetooth {
compatible = "brcm,bcm43438-bt";clocks = <&rk808 1>;clock-names = "ext_clock";device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;- };
};
&uart2 { status = "okay"; };
+&tcphy0 {
- status = "okay";
+};
+&tcphy1 {
- status = "okay";
+};
&u2phy0 { status = "okay"; }; @@ -497,10 +620,34 @@ status = "okay"; };
+&usbdrd3_0 {
- status = "okay";
+};
+&usbdrd_dwc3_0 {
- status = "okay";
+};
+&usbdrd3_1 {
- status = "okay";
+};
+&usbdrd_dwc3_1 {
- status = "okay";
+};
&vopb { status = "okay"; };
+&vopb_mmu {
- status = "okay";
+};
&vopl { status = "okay"; };
+&vopl_mmu {
- status = "okay";
+};
On 2019/7/2 上午10:06, Kever Yang wrote:
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
Sync the dts files for the Rock960 boards from Linux to get the latest changes and fixes for the devices.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Applied to u-boot-rockchip.
Thanks, - Kever
Thanks,
- Kever
arch/arm/dts/rk3399-ficus.dts | 92 ++++++++++++- arch/arm/dts/rk3399-rock960.dts | 91 +++++++++++- arch/arm/dts/rk3399-rock960.dtsi | 229 +++++++++++++++++++++++++------ 3 files changed, 366 insertions(+), 46 deletions(-)
diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts index 4b2dd82b67..6b059bd7a0 100644 --- a/arch/arm/dts/rk3399-ficus.dts +++ b/arch/arm/dts/rk3399-ficus.dts @@ -23,6 +23,52 @@ clock-output-names = "clkin_gmac"; #clock-cells = <0>; };
leds {
compatible = "gpio-leds";pinctrl-names = "default";pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,<&user_led4>, <&wlan_led>, <&bt_led>;user_led1 {label = "red:user1";gpios = <&gpio4 25 0>;linux,default-trigger = "heartbeat";};user_led2 {label = "red:user2";gpios = <&gpio4 26 0>;linux,default-trigger = "mmc0";};user_led3 {label = "red:user3";gpios = <&gpio4 30 0>;linux,default-trigger = "mmc1";};user_led4 {label = "red:user4";gpios = <&gpio1 0 0>;panic-indicator;linux,default-trigger = "none";};wlan_active_led {label = "red:wlan";gpios = <&gpio1 1 0>;linux,default-trigger = "phy0tx";default-state = "off";};bt_active_led {label = "red:bt";gpios = <&gpio1 4 0>;linux,default-trigger = "hci0-power";default-state = "off";};}; };
&gmac {
@@ -49,23 +95,63 @@ gmac { rgmii_sleep_pins: rgmii-sleep-pins { rockchip,pins =
<3 15 RK_FUNC_GPIO &pcfg_output_low>;
<3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;}; };
pcie { pcie_drv: pcie-drv { rockchip,pins =
<1 24 RK_FUNC_GPIO &pcfg_pull_none>;
<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; };};
usb2 { host_vbus_drv: host-vbus-drv { rockchip,pins =
<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
<4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;- leds {
user_led1: user_led1 {rockchip,pins =<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;};user_led2: user_led2 {rockchip,pins =<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;};user_led3: user_led3 {rockchip,pins =<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;};user_led4: user_led4 {rockchip,pins =<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;};wlan_led: wlan_led {rockchip,pins =<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;};bt_led: bt_led {rockchip,pins =<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;};- };
+};
+&usbdrd_dwc3_0 {
- dr_mode = "host";
+};
+&usbdrd_dwc3_1 {
dr_mode = "host"; };
&vcc3v3_pcie {
diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts index 7e06bc97e5..12285c51cc 100644 --- a/arch/arm/dts/rk3399-rock960.dts +++ b/arch/arm/dts/rk3399-rock960.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /*
- Copyright (C) 2018 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
- Copyright (c) 2018 Linaro Ltd.
*/
/dts-v1/;
@@ -13,6 +13,53 @@ chosen { stdout-path = "serial2:1500000n8"; };
leds {
compatible = "gpio-leds";pinctrl-names = "default";pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,<&user_led4>, <&wlan_led>, <&bt_led>;user_led1 {label = "green:user1";gpios = <&gpio4 RK_PC2 0>;linux,default-trigger = "heartbeat";};user_led2 {label = "green:user2";gpios = <&gpio4 RK_PC6 0>;linux,default-trigger = "mmc0";};user_led3 {label = "green:user3";gpios = <&gpio4 RK_PD0 0>;linux,default-trigger = "mmc1";};user_led4 {label = "green:user4";gpios = <&gpio4 RK_PD4 0>;panic-indicator;linux,default-trigger = "none";};wlan_active_led {label = "yellow:wlan";gpios = <&gpio4 RK_PD5 0>;linux,default-trigger = "phy0tx";default-state = "off";};bt_active_led {label = "blue:bt";gpios = <&gpio4 RK_PD6 0>;linux,default-trigger = "hci0-power";default-state = "off";};};
};
&pcie0 {
@@ -20,6 +67,38 @@ };
&pinctrl {
- leds {
user_led1: user_led1 {rockchip,pins =<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;};user_led2: user_led2 {rockchip,pins =<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;};user_led3: user_led3 {rockchip,pins =<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;};user_led4: user_led4 {rockchip,pins =<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;};wlan_led: wlan_led {rockchip,pins =<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;};bt_led: bt_led {rockchip,pins =<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- pcie { pcie_drv: pcie-drv { rockchip,pins =
@@ -35,6 +114,14 @@ }; };
+&usbdrd_dwc3_0 {
- dr_mode = "otg";
+};
+&usbdrd_dwc3_1 {
- dr_mode = "host";
+};
- &vcc3v3_pcie { gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; };
diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi index 51644d6d02..c7d48d41e1 100644 --- a/arch/arm/dts/rk3399-rock960.dtsi +++ b/arch/arm/dts/rk3399-rock960.dtsi @@ -1,13 +1,32 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /*
- Copyright (c) 2018 Collabora Ltd.
*/
- Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
- Copyright (c) 2018 Linaro Ltd.
-#include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/pinctrl/rockchip.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi"
/ {
- sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";clocks = <&rk808 1>;clock-names = "ext_clock";pinctrl-names = "default";pinctrl-0 = <&wifi_enable_h>;reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;- };
- vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";regulator-name = "vcc12v_dcin";regulator-min-microvolt = <12000000>;regulator-max-microvolt = <12000000>;regulator-always-on;regulator-boot-on;- };
- vcc1v8_s0: vcc1v8-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s0";
@@ -16,12 +35,13 @@ regulator-always-on; };
- vcc_sys: vcc-sys {
- vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-name = "vcc5v0_sys";regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on;
vin-supply = <&vcc12v_dcin>;};
vcc3v3_sys: vcc3v3-sys {
@@ -30,7 +50,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on;
vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;};
vcc3v3_pcie: vcc3v3-pcie-regulator {
@@ -54,20 +74,8 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on;
vin-supply = <&vcc_sys>;- };
- vdd_log: vdd-log {
compatible = "pwm-regulator";pwms = <&pwm2 0 25000 0>;regulator-name = "vdd_log";regulator-min-microvolt = <800000>;regulator-max-microvolt = <1400000>;regulator-always-on;regulator-boot-on;vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;
};
&cpu_l0 {
@@ -98,7 +106,19 @@ status = "okay"; };
+&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
+};
- &hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
+};
+&hdmi_sound { status = "okay"; };
@@ -118,7 +138,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on;
vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;status = "okay";
regulator-state-mem {
@@ -136,7 +156,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on;
vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;@@ -154,16 +174,16 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2";
vcc1-supply = <&vcc_sys>;vcc2-supply = <&vcc_sys>;vcc3-supply = <&vcc_sys>;vcc4-supply = <&vcc_sys>;vcc6-supply = <&vcc_sys>;vcc7-supply = <&vcc_sys>;
vcc1-supply = <&vcc5v0_sys>;vcc2-supply = <&vcc5v0_sys>;vcc3-supply = <&vcc5v0_sys>;vcc4-supply = <&vcc5v0_sys>;vcc6-supply = <&vcc5v0_sys>;vcc7-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc_sys>;vcc10-supply = <&vcc_sys>;vcc11-supply = <&vcc_sys>;
vcc9-supply = <&vcc5v0_sys>;vcc10-supply = <&vcc5v0_sys>;vcc11-supply = <&vcc5v0_sys>;@@ -344,6 +364,10 @@ status = "okay"; };
+&i2s2 {
status = "okay";+};
- &io_domains { bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
@@ -370,45 +394,92 @@ };
&pinctrl {
- bt {
bt_enable_h: bt-enable-h {rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;};bt_host_wake_l: bt-host-wake-l {rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;};bt_wake_l: bt-wake-l {rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins =
<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
<4 RK_PB0 1 &pcfg_pull_up_8ma>;};
sdmmc_bus4: sdmmc-bus4 { rockchip,pins =
<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,<4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,<4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,<4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
<4 RK_PB0 1 &pcfg_pull_up_8ma>,<4 RK_PB1 1 &pcfg_pull_up_8ma>,<4 RK_PB2 1 &pcfg_pull_up_8ma>,<4 RK_PB3 1 &pcfg_pull_up_8ma>;};
sdmmc_clk: sdmmc-clk { rockchip,pins =
<4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
<4 RK_PB4 1 &pcfg_pull_none_18ma>;};
sdmmc_cmd: sdmmc-cmd { rockchip,pins =
<4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
<4 RK_PB5 1 &pcfg_pull_up_8ma>;};};
sdio0 {
sdio0_bus4: sdio0-bus4 {rockchip,pins =<2 RK_PC4 1 &pcfg_pull_up_20ma>,<2 RK_PC5 1 &pcfg_pull_up_20ma>,<2 RK_PC6 1 &pcfg_pull_up_20ma>,<2 RK_PC7 1 &pcfg_pull_up_20ma>;};sdio0_cmd: sdio0-cmd {rockchip,pins =<2 RK_PD0 1 &pcfg_pull_up_20ma>;};sdio0_clk: sdio0-clk {rockchip,pins =<2 RK_PD1 1 &pcfg_pull_none_20ma>;}; };
pmic { pmic_int_l: pmic-int-l { rockchip,pins =
<1 21 RK_FUNC_GPIO &pcfg_pull_up>;
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;};
vsel1_gpio: vsel1-gpio { rockchip,pins =
<1 17 RK_FUNC_GPIO &pcfg_pull_down>;
<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;};
vsel2_gpio: vsel2-gpio { rockchip,pins =
<1 14 RK_FUNC_GPIO &pcfg_pull_down>;
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;};- };
- sdio-pwrseq {
wifi_enable_h: wifi-enable-h {rockchip,pins =<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- wifi {
wifi_host_wake_l: wifi-host-wake-l {rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;@@ -421,6 +492,32 @@ status = "okay"; };
+&sdio0 {
- bus-width = <4>;
- clock-frequency = <50000000>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
- brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";reg = <1>;interrupt-parent = <&gpio0>;interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;interrupt-names = "host-wake";pinctrl-names = "default";pinctrl-0 = <&wifi_host_wake_l>;- };
+};
- &sdhci { bus-width = <8>; mmc-hs400-1_8v;
@@ -445,16 +542,42 @@ status = "okay"; };
+&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- rockchip,hw-tshut-temp = <110000>;
- status = "okay";
+};
- &uart0 { pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";clocks = <&rk808 1>;clock-names = "ext_clock";device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;}; };
&uart2 { status = "okay"; };
+&tcphy0 {
- status = "okay";
+};
+&tcphy1 {
- status = "okay";
+};
- &u2phy0 { status = "okay"; };
@@ -497,10 +620,34 @@ status = "okay"; };
+&usbdrd3_0 {
- status = "okay";
+};
+&usbdrd_dwc3_0 {
- status = "okay";
+};
+&usbdrd3_1 {
- status = "okay";
+};
+&usbdrd_dwc3_1 {
- status = "okay";
+};
- &vopb { status = "okay"; };
+&vopb_mmu {
- status = "okay";
+};
- &vopl { status = "okay"; };
+&vopl_mmu {
- status = "okay";
+};
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
On 1 July 2019 9:35:49 PM IST, Peter Robinson pbrobinson@gmail.com wrote:
Sync the dts files for the Rock960 boards from Linux to get the latest changes and fixes for the devices.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
Thanks, Mani
arch/arm/dts/rk3399-ficus.dts | 92 ++++++++++++- arch/arm/dts/rk3399-rock960.dts | 91 +++++++++++- arch/arm/dts/rk3399-rock960.dtsi | 229 +++++++++++++++++++++++++------ 3 files changed, 366 insertions(+), 46 deletions(-)
diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts index 4b2dd82b67..6b059bd7a0 100644 --- a/arch/arm/dts/rk3399-ficus.dts +++ b/arch/arm/dts/rk3399-ficus.dts @@ -23,6 +23,52 @@ clock-output-names = "clkin_gmac"; #clock-cells = <0>; };
- leds {
compatible = "gpio-leds";pinctrl-names = "default";pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,<&user_led4>, <&wlan_led>, <&bt_led>;user_led1 {label = "red:user1";gpios = <&gpio4 25 0>;linux,default-trigger = "heartbeat";};user_led2 {label = "red:user2";gpios = <&gpio4 26 0>;linux,default-trigger = "mmc0";};user_led3 {label = "red:user3";gpios = <&gpio4 30 0>;linux,default-trigger = "mmc1";};user_led4 {label = "red:user4";gpios = <&gpio1 0 0>;panic-indicator;linux,default-trigger = "none";};wlan_active_led {label = "red:wlan";gpios = <&gpio1 1 0>;linux,default-trigger = "phy0tx";default-state = "off";};bt_active_led {label = "red:bt";gpios = <&gpio1 4 0>;linux,default-trigger = "hci0-power";default-state = "off";};- };
};
&gmac { @@ -49,23 +95,63 @@ gmac { rgmii_sleep_pins: rgmii-sleep-pins { rockchip,pins =
<3 15 RK_FUNC_GPIO &pcfg_output_low>;
<3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;}; };
pcie { pcie_drv: pcie-drv { rockchip,pins =
<1 24 RK_FUNC_GPIO &pcfg_pull_none>;
<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; };};
usb2 { host_vbus_drv: host-vbus-drv { rockchip,pins =
<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
<4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;- leds {
user_led1: user_led1 {rockchip,pins =<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;};user_led2: user_led2 {rockchip,pins =<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;};user_led3: user_led3 {rockchip,pins =<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;};user_led4: user_led4 {rockchip,pins =<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;};wlan_led: wlan_led {rockchip,pins =<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;};bt_led: bt_led {rockchip,pins =<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;};- };
+};
+&usbdrd_dwc3_0 {
- dr_mode = "host";
+};
+&usbdrd_dwc3_1 {
- dr_mode = "host";
};
&vcc3v3_pcie { diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts index 7e06bc97e5..12285c51cc 100644 --- a/arch/arm/dts/rk3399-rock960.dts +++ b/arch/arm/dts/rk3399-rock960.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /*
- Copyright (C) 2018 Manivannan Sadhasivam
manivannan.sadhasivam@linaro.org
- Copyright (c) 2018 Linaro Ltd.
*/
/dts-v1/; @@ -13,6 +13,53 @@ chosen { stdout-path = "serial2:1500000n8"; };
- leds {
compatible = "gpio-leds";pinctrl-names = "default";pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,<&user_led4>, <&wlan_led>, <&bt_led>;user_led1 {label = "green:user1";gpios = <&gpio4 RK_PC2 0>;linux,default-trigger = "heartbeat";};user_led2 {label = "green:user2";gpios = <&gpio4 RK_PC6 0>;linux,default-trigger = "mmc0";};user_led3 {label = "green:user3";gpios = <&gpio4 RK_PD0 0>;linux,default-trigger = "mmc1";};user_led4 {label = "green:user4";gpios = <&gpio4 RK_PD4 0>;panic-indicator;linux,default-trigger = "none";};wlan_active_led {label = "yellow:wlan";gpios = <&gpio4 RK_PD5 0>;linux,default-trigger = "phy0tx";default-state = "off";};bt_active_led {label = "blue:bt";gpios = <&gpio4 RK_PD6 0>;linux,default-trigger = "hci0-power";default-state = "off";};- };
};
&pcie0 { @@ -20,6 +67,38 @@ };
&pinctrl {
- leds {
user_led1: user_led1 {rockchip,pins =<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;};user_led2: user_led2 {rockchip,pins =<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;};user_led3: user_led3 {rockchip,pins =<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;};user_led4: user_led4 {rockchip,pins =<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;};wlan_led: wlan_led {rockchip,pins =<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;};bt_led: bt_led {rockchip,pins =<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- pcie { pcie_drv: pcie-drv { rockchip,pins =
@@ -35,6 +114,14 @@ }; };
+&usbdrd_dwc3_0 {
- dr_mode = "otg";
+};
+&usbdrd_dwc3_1 {
- dr_mode = "host";
+};
&vcc3v3_pcie { gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi index 51644d6d02..c7d48d41e1 100644 --- a/arch/arm/dts/rk3399-rock960.dtsi +++ b/arch/arm/dts/rk3399-rock960.dtsi @@ -1,13 +1,32 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /*
- Copyright (c) 2018 Collabora Ltd.
- Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
- Copyright (c) 2018 Linaro Ltd.
*/
-#include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/pinctrl/rockchip.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi"
/ {
- sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";clocks = <&rk808 1>;clock-names = "ext_clock";pinctrl-names = "default";pinctrl-0 = <&wifi_enable_h>;reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;- };
- vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";regulator-name = "vcc12v_dcin";regulator-min-microvolt = <12000000>;regulator-max-microvolt = <12000000>;regulator-always-on;regulator-boot-on;- };
- vcc1v8_s0: vcc1v8-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s0";
@@ -16,12 +35,13 @@ regulator-always-on; };
- vcc_sys: vcc-sys {
- vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-name = "vcc5v0_sys";regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on;
vin-supply = <&vcc12v_dcin>;};
vcc3v3_sys: vcc3v3-sys {
@@ -30,7 +50,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on;
vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;};
vcc3v3_pcie: vcc3v3-pcie-regulator {
@@ -54,20 +74,8 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on;
vin-supply = <&vcc_sys>;- };
- vdd_log: vdd-log {
compatible = "pwm-regulator";pwms = <&pwm2 0 25000 0>;regulator-name = "vdd_log";regulator-min-microvolt = <800000>;regulator-max-microvolt = <1400000>;regulator-always-on;regulator-boot-on;vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;
};
&cpu_l0 { @@ -98,7 +106,19 @@ status = "okay"; };
+&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
+};
&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
+};
+&hdmi_sound { status = "okay"; };
@@ -118,7 +138,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on;
vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;status = "okay";
regulator-state-mem {
@@ -136,7 +156,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on;
vin-supply = <&vcc_sys>;
vin-supply = <&vcc5v0_sys>;@@ -154,16 +174,16 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2";
vcc1-supply = <&vcc_sys>;vcc2-supply = <&vcc_sys>;vcc3-supply = <&vcc_sys>;vcc4-supply = <&vcc_sys>;vcc6-supply = <&vcc_sys>;vcc7-supply = <&vcc_sys>;
vcc1-supply = <&vcc5v0_sys>;vcc2-supply = <&vcc5v0_sys>;vcc3-supply = <&vcc5v0_sys>;vcc4-supply = <&vcc5v0_sys>;vcc6-supply = <&vcc5v0_sys>;vcc7-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc_sys>;vcc10-supply = <&vcc_sys>;vcc11-supply = <&vcc_sys>;
vcc9-supply = <&vcc5v0_sys>;vcc10-supply = <&vcc5v0_sys>;vcc11-supply = <&vcc5v0_sys>;@@ -344,6 +364,10 @@ status = "okay"; };
+&i2s2 {
status = "okay";+};
&io_domains { bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ @@ -370,45 +394,92 @@ };
&pinctrl {
- bt {
bt_enable_h: bt-enable-h {rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;};bt_host_wake_l: bt-host-wake-l {rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;};bt_wake_l: bt-wake-l {rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins =
<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
<4 RK_PB0 1 &pcfg_pull_up_8ma>;};
sdmmc_bus4: sdmmc-bus4 { rockchip,pins =
<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,<4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,<4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,<4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
<4 RK_PB0 1 &pcfg_pull_up_8ma>,<4 RK_PB1 1 &pcfg_pull_up_8ma>,<4 RK_PB2 1 &pcfg_pull_up_8ma>,<4 RK_PB3 1 &pcfg_pull_up_8ma>;};
sdmmc_clk: sdmmc-clk { rockchip,pins =
<4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
<4 RK_PB4 1 &pcfg_pull_none_18ma>;};
sdmmc_cmd: sdmmc-cmd { rockchip,pins =
<4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
<4 RK_PB5 1 &pcfg_pull_up_8ma>;};};
sdio0 {
sdio0_bus4: sdio0-bus4 {rockchip,pins =<2 RK_PC4 1 &pcfg_pull_up_20ma>,<2 RK_PC5 1 &pcfg_pull_up_20ma>,<2 RK_PC6 1 &pcfg_pull_up_20ma>,<2 RK_PC7 1 &pcfg_pull_up_20ma>;};sdio0_cmd: sdio0-cmd {rockchip,pins =<2 RK_PD0 1 &pcfg_pull_up_20ma>;};sdio0_clk: sdio0-clk {rockchip,pins =<2 RK_PD1 1 &pcfg_pull_none_20ma>;}; };
pmic { pmic_int_l: pmic-int-l { rockchip,pins =
<1 21 RK_FUNC_GPIO &pcfg_pull_up>;
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;};
vsel1_gpio: vsel1-gpio { rockchip,pins =
<1 17 RK_FUNC_GPIO &pcfg_pull_down>;
<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;};
vsel2_gpio: vsel2-gpio { rockchip,pins =
<1 14 RK_FUNC_GPIO &pcfg_pull_down>;
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;};- };
- sdio-pwrseq {
wifi_enable_h: wifi-enable-h {rockchip,pins =<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- wifi {
wifi_host_wake_l: wifi-host-wake-l {rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;}; @@ -421,6 +492,32 @@ status = "okay"; };
+&sdio0 {
- bus-width = <4>;
- clock-frequency = <50000000>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
- brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";reg = <1>;interrupt-parent = <&gpio0>;interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;interrupt-names = "host-wake";pinctrl-names = "default";pinctrl-0 = <&wifi_host_wake_l>;- };
+};
&sdhci { bus-width = <8>; mmc-hs400-1_8v; @@ -445,16 +542,42 @@ status = "okay"; };
+&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- rockchip,hw-tshut-temp = <110000>;
- status = "okay";
+};
&uart0 { pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "okay";
- bluetooth {
compatible = "brcm,bcm43438-bt";clocks = <&rk808 1>;clock-names = "ext_clock";device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;- };
};
&uart2 { status = "okay"; };
+&tcphy0 {
- status = "okay";
+};
+&tcphy1 {
- status = "okay";
+};
&u2phy0 { status = "okay"; }; @@ -497,10 +620,34 @@ status = "okay"; };
+&usbdrd3_0 {
- status = "okay";
+};
+&usbdrd_dwc3_0 {
- status = "okay";
+};
+&usbdrd3_1 {
- status = "okay";
+};
+&usbdrd_dwc3_1 {
- status = "okay";
+};
&vopb { status = "okay"; };
+&vopb_mmu {
- status = "okay";
+};
&vopl { status = "okay"; };
+&vopl_mmu {
- status = "okay";
+};
The Rock960 doesn't contain SPI flash so drop related config options.
Signed-off-by: Peter Robinson pbrobinson@gmail.com --- configs/rock960-rk3399_defconfig | 2 -- 1 file changed, 2 deletions(-)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 1958b7e190..1aa986e9cd 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -21,7 +21,6 @@ CONFIG_SYS_PROMPT="rock960 => " CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -35,7 +34,6 @@ CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ROCKCHIP=y -CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_RK8XX=y
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
The Rock960 doesn't contain SPI flash so drop related config options.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
configs/rock960-rk3399_defconfig | 2 -- 1 file changed, 2 deletions(-)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 1958b7e190..1aa986e9cd 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -21,7 +21,6 @@ CONFIG_SYS_PROMPT="rock960 => " CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -35,7 +34,6 @@ CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ROCKCHIP=y -CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_RK8XX=y
On 2019/7/2 上午10:07, Kever Yang wrote:
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
The Rock960 doesn't contain SPI flash so drop related config options.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Applied to u-boot-rockchip.
Thanks, - Kever
Thanks,
- Kever
configs/rock960-rk3399_defconfig | 2 -- 1 file changed, 2 deletions(-)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 1958b7e190..1aa986e9cd 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -21,7 +21,6 @@ CONFIG_SYS_PROMPT="rock960 => " CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -35,7 +34,6 @@ CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ROCKCHIP=y -CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_RK8XX=y
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
On 1 July 2019 9:35:50 PM IST, Peter Robinson pbrobinson@gmail.com wrote:
The Rock960 doesn't contain SPI flash so drop related config options.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
Thanks, Mani
configs/rock960-rk3399_defconfig | 2 -- 1 file changed, 2 deletions(-)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 1958b7e190..1aa986e9cd 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -21,7 +21,6 @@ CONFIG_SYS_PROMPT="rock960 => " CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -35,7 +34,6 @@ CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ROCKCHIP=y -CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_RK8XX=y
We have both PMIC and Regulator functionality so it's useful to be able to see output and debug with the commands enabled.
Signed-off-by: Peter Robinson pbrobinson@gmail.com --- configs/rock960-rk3399_defconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 1aa986e9cd..2381f0cd7e 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_PROMPT="rock960 => " CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
We have both PMIC and Regulator functionality so it's useful to be able to see output and debug with the commands enabled.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
configs/rock960-rk3399_defconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 1aa986e9cd..2381f0cd7e 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_PROMPT="rock960 => " CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y
On 2019/7/2 上午10:07, Kever Yang wrote:
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
We have both PMIC and Regulator functionality so it's useful to be able to see output and debug with the commands enabled.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Applied to u-boot-rockchip.
Thanks, - Kever
Thanks,
- Kever
configs/rock960-rk3399_defconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 1aa986e9cd..2381f0cd7e 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_PROMPT="rock960 => " CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
On 1 July 2019 9:35:51 PM IST, Peter Robinson pbrobinson@gmail.com wrote:
We have both PMIC and Regulator functionality so it's useful to be able to see output and debug with the commands enabled.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
Thanks, Mani
configs/rock960-rk3399_defconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 1aa986e9cd..2381f0cd7e 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_PROMPT="rock960 => " CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y
Enable the SDMA controller so the eMMC connected to the SDHCI controller (sdhci@fe330000) can make use of it.
Signed-off-by: Peter Robinson pbrobinson@gmail.com --- configs/rock960-rk3399_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 2381f0cd7e..20c9cdeda3 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -35,6 +35,7 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
Enable the SDMA controller so the eMMC connected to the SDHCI controller (sdhci@fe330000) can make use of it.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
configs/rock960-rk3399_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 2381f0cd7e..20c9cdeda3 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -35,6 +35,7 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y
On 2019/7/2 上午10:07, Kever Yang wrote:
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
Enable the SDMA controller so the eMMC connected to the SDHCI controller (sdhci@fe330000) can make use of it.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Applied to u-boot-rockchip.
Thanks, - Kever
Thanks,
- Kever
configs/rock960-rk3399_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 2381f0cd7e..20c9cdeda3 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -35,6 +35,7 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
On 1 July 2019 9:35:52 PM IST, Peter Robinson pbrobinson@gmail.com wrote:
Enable the SDMA controller so the eMMC connected to the SDHCI controller (sdhci@fe330000) can make use of it.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
Thanks, Mani
configs/rock960-rk3399_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 2381f0cd7e..20c9cdeda3 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -35,6 +35,7 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y
As the Rock960 doesn't have an onboard wired ethernet interface it's useful to have some common USB wired ethernet devices added to enable testing.
Signed-off-by: Peter Robinson pbrobinson@gmail.com --- configs/rock960-rk3399_defconfig | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 20c9cdeda3..90115e903b 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -48,5 +48,12 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_ROCKCHIP_USB2_PHY=y +CONFIG_DM_ETH=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
As the Rock960 doesn't have an onboard wired ethernet interface it's useful to have some common USB wired ethernet devices added to enable testing.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
configs/rock960-rk3399_defconfig | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 20c9cdeda3..90115e903b 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -48,5 +48,12 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_ROCKCHIP_USB2_PHY=y +CONFIG_DM_ETH=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y
On 2019/7/2 上午10:07, Kever Yang wrote:
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
As the Rock960 doesn't have an onboard wired ethernet interface it's useful to have some common USB wired ethernet devices added to enable testing.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Applied to u-boot-rockchip.
Thanks, - Kever
Thanks,
- Kever
configs/rock960-rk3399_defconfig | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 20c9cdeda3..90115e903b 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -48,5 +48,12 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_ROCKCHIP_USB2_PHY=y +CONFIG_DM_ETH=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
On 1 July 2019 9:35:53 PM IST, Peter Robinson pbrobinson@gmail.com wrote:
As the Rock960 doesn't have an onboard wired ethernet interface it's useful to have some common USB wired ethernet devices added to enable testing.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
Thanks, Mani
configs/rock960-rk3399_defconfig | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 20c9cdeda3..90115e903b 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -48,5 +48,12 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_ROCKCHIP_USB2_PHY=y +CONFIG_DM_ETH=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y
Enable USB3 support via the dwc3 XHCI driver.
Signed-off-by: Peter Robinson pbrobinson@gmail.com --- configs/rock960-rk3399_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 90115e903b..5be36383e1 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -55,5 +55,8 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +# CONFIG_USB_XHCI_ROCKCHIP is not set CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
Enable USB3 support via the dwc3 XHCI driver.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
configs/rock960-rk3399_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 90115e903b..5be36383e1 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -55,5 +55,8 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +# CONFIG_USB_XHCI_ROCKCHIP is not set CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y
On 2019/7/2 上午10:07, Kever Yang wrote:
Hi Peter,
On 07/02/2019 12:05 AM, Peter Robinson wrote:
Enable USB3 support via the dwc3 XHCI driver.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Applied to u-boot-rockchip.
Thanks, - Kever
Thanks,
- Kever
configs/rock960-rk3399_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 90115e903b..5be36383e1 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -55,5 +55,8 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +# CONFIG_USB_XHCI_ROCKCHIP is not set CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
On 1 July 2019 9:35:54 PM IST, Peter Robinson pbrobinson@gmail.com wrote:
Enable USB3 support via the dwc3 XHCI driver.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
Thanks, Mani
configs/rock960-rk3399_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 90115e903b..5be36383e1 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -55,5 +55,8 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +# CONFIG_USB_XHCI_ROCKCHIP is not set CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y
Hi Peter,
On 1 July 2019 9:35:48 PM IST, Peter Robinson pbrobinson@gmail.com wrote:
Hi,
Some improvements to the Rock960, tested locally on a v1.2 board. Most are self explanatory in the patches.
Many thanks for your work!
The series looks good to me but I don't have time to test it on Rock960 until Friday. Hence, just added Reviewed-by tag for now.
Thanks, Mani
The usb3 enablement requires the dwc3 patch series [1] that Mark posted to actually work but is completely indendent of it.
Peter
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=116911
participants (3)
-
Kever Yang -
Mani -
Peter Robinson