[U-Boot] [RFT] configs: arndale: Use appropriate driver for Asix AX88760
Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo. The appropriate driver for it is USB_ETHER_ASIX.
The mistake probably came from misinterpretation of commit e9954b867ce0 ("usb: eth: add ASIX AX88179 DRIVER") which was tested on RECS5250 COM module. This module indeed has Exynos5250 and some similarities with Arndale 5250 board but the USB/Ethernet chip used there is apparently different.
Fixes: f58ad98a621c ("usb: net: migrate USB Ethernet adapters to Kconfig") Signed-off-by: Krzysztof Kozlowski krzk@kernel.org
---
Not tested. --- configs/arndale_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 24422645cbac..b1f20b915889 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -41,4 +41,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_ASIX=y
On Thu, 21 Feb 2019 18:08:12 +0100 Krzysztof Kozlowski krzk@kernel.org wrote:
Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo. The appropriate driver for it is USB_ETHER_ASIX.
The mistake probably came from misinterpretation of commit e9954b867ce0 ("usb: eth: add ASIX AX88179 DRIVER") which was tested on RECS5250 COM module. This module indeed has Exynos5250 and some similarities with Arndale 5250 board but the USB/Ethernet chip used there is apparently different.
Fixes: f58ad98a621c ("usb: net: migrate USB Ethernet adapters to Kconfig") Signed-off-by: Krzysztof Kozlowski krzk@kernel.org
Not tested.
configs/arndale_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 24422645cbac..b1f20b915889 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -41,4 +41,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_ASIX=y
Reviewed-by: Lukasz Majewski lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
participants (2)
-
Krzysztof Kozlowski -
Lukasz Majewski