[U-Boot-Users] u-boot and 2.4.18 kernel problem
I am using u-boot-1.0 and 2.4.18 with my 855T custom board. u-boot loads the kernel from flash. Sometimes, u-boot says "uncomressing image .. OK" and then nothing happens. I have to reset the power to the board to get it working.
My board runs at 49.152 MHz and has 16MB flash and 32 MB SDRAM. I have checked my SDRAM UPMA settings and cannot find anything wrong with it.
Any help?
Lokesh Kumar Wireless Matrix USA Inc. 703-262-4032
In message 294FD9D3403A0340BDAC38E48DCEFFDC9355A2@RES-EXCH you wrote:
My board runs at 49.152 MHz and has 16MB flash and 32 MB SDRAM. I have checked my SDRAM UPMA settings and cannot find anything wrong with it.
Then check the rest of the SDRAM initialization sequence, which is much more important that the UPM settings. Yes, this is a FAQ.
Best regards,
Wolfgang Denk
participants (2)
-
Lokesh Kumar -
Wolfgang Denk