From: Peter Chubb Peter.Chubb@data61.csiro.au

Only one of the two USB ports were enabled; this patch enables the one at the top of the board.

Signed-off-by: Peter Chubb peter.chubb@data61.csiro.au --- arch/arm/dts/tegra124-cei-tk1-som.dts | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/tegra124-cei-tk1-som.dts b/arch/arm/dts/tegra124-cei-tk1-som.dts index c4d4f9d89f..1680004c09 100644 --- a/arch/arm/dts/tegra124-cei-tk1-som.dts +++ b/arch/arm/dts/tegra124-cei-tk1-som.dts @@ -21,7 +21,8 @@ spi0 = "/spi@7000d400"; spi1 = "/spi@7000da00"; usb0 = "/usb@7d000000"; - usb1 = "/usb@7d008000"; + usb1 = "/usb@7d004000"; + usb2 = "/usb@7d008000"; };

memory { @@ -316,6 +317,14 @@ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; };

+ usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + }; + usb@7d008000 { status = "okay"; nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;