The clk driver for the RK3368 picked the wrong data structure's size for its auto-alloc size: the size was calculated on the structure representing the CRU hardware block instead of the priv structure. As the CRU's register file is much larger than the driver's priv, this did not cause any pain (except wasting memory).

Fix this by using the correct data structure's size.

Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com ---

drivers/clk/rockchip/clk_rk3368.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c index b16c075..18ae287 100644 --- a/drivers/clk/rockchip/clk_rk3368.c +++ b/drivers/clk/rockchip/clk_rk3368.c @@ -434,7 +434,7 @@ U_BOOT_DRIVER(rockchip_rk3368_cru) = { .name = "rockchip_rk3368_cru", .id = UCLASS_CLK, .of_match = rk3368_clk_ids, - .priv_auto_alloc_size = sizeof(struct rk3368_cru), + .priv_auto_alloc_size = sizeof(struct rk3368_clk_priv), #if CONFIG_IS_ENABLED(OF_PLATDATA) .platdata_auto_alloc_size = sizeof(struct rk3368_clk_plat), #endif