From: Michael Trimarchi michael@amarulasolutions.com

SPL on Engicam i.Core M6 boards enabled DM, so it would require some malloc() pool before relocation in order to load U-Boot proper properly.

So, enable SPL malloc() pool of 0x2000 size similarly like what we have used for icore mmc defconfigs.

Reviewed-by: Jagan Teki jagan@amarulasolutions.com Tested-by: Shyam Saini shyam.saini@amarulasolutions.com Signed-off-by: Michael Trimarchi michael@amarulasolutions.com --- Changelogs: V2: improve commit message

V3: include Changelogs cc Stefano Babic and Fabio Estevam --- configs/imx6dl_icore_nand_defconfig | 1 + configs/imx6q_icore_nand_defconfig | 1 + 2 files changed, 2 insertions(+)

diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig index c34c515080e9..69c45b948b3a 100644 --- a/configs/imx6dl_icore_nand_defconfig +++ b/configs/imx6dl_icore_nand_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_MX6Q_ENGICAM=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig index cf149d615b32..b53a5010e5dd 100644 --- a/configs/imx6q_icore_nand_defconfig +++ b/configs/imx6q_icore_nand_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_MX6Q_ENGICAM=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y