st 18. 5. 2022 v 12:58 odesílatel Michal Simek monstr@monstr.eu napsal:

Setup default values for debug console, base address and frequency.

Signed-off-by: Michal Simek michal.simek@amd.com

drivers/serial/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 26fa498bbbb7..f9db7860750b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -502,6 +502,8 @@ config DEBUG_UART_BASE depends on DEBUG_UART default 0 if DEBUG_SBI_CONSOLE default 0 if DEBUG_UART_SANDBOX

•   default 0xff000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQMP
  

•   default 0xe0000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQ
    help
      This is the base address of your UART for memory-mapped UARTs.
  
  

@@ -514,6 +516,8 @@ config DEBUG_UART_CLOCK default 0 if DEBUG_SBI_CONSOLE default 0 if DEBUG_UART_SANDBOX default 0 if DEBUG_MVEBU_A3700_UART

•   default 100000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQMP
  

•   default 50000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQ
    help
      The UART input clock determines the speed of the internal UART
      circuitry. The baud rate is derived from this by dividing the input
  

-- 2.36.0

Applied. M