Hi,

https://community.nxp.com/thread/520887

https://forum.digikey.com/t/re-pico-pi-imx7-and-siging-in-um/2537/208 *(Please look at my last 10 posts.) *

I have these issues above. When I tried theses commands:

.*/imx_uart* /dev/ttyUSB0 mx7_usb_work.conf u-boot.imx & *imx_usb u-boot.imx* (of course, conform github, imx_usb wouldn’t work because the SOM is dead)

How can I put u-boot.imx in pico-imx7d SOM module/baseboard with new main chip (MCIMX7D7DVM10SC)