[U-Boot] CONFIG_SERVERIP
Hi all, In the current git source, I have the serverip config set but tftp complains about serverip not being set. I didn't see any changes to the source here. Am I missing something?
printenv
baudrate=115200 ipaddr=192.168.0.200 serverip=192.168.0.100 gatewayip=192.168.0.1 netmask=255.255.255.0 hostname="Vincy" ethaddr=00:07:A6:00:6A:E6 bootdelay=5 bootargs= bootcmd= ethact=macb0
Environment size: 247/16380 bytes OmniTouch> tftp link up, 100Mbps full-duplex (lpa: 0x41e1) *** ERROR: `serverip' not set
E Robertson wrote:
Hi all, In the current git source, I have the serverip config set but tftp complains about serverip not being set. I didn't see any changes to the source here. Am I missing something?
printenv
baudrate=115200 ipaddr=192.168.0.200 serverip=192.168.0.100 gatewayip=192.168.0.1 netmask=255.255.255.0 hostname="Vincy" ethaddr=00:07:A6:00:6A:E6 bootdelay=5 bootargs= bootcmd= ethact=macb0
Environment size: 247/16380 bytes OmniTouch> tftp link up, 100Mbps full-duplex (lpa: 0x41e1) *** ERROR: `serverip' not set
What is "serverip" set *after* running "tftp"? Is the "tftp" command trashing serverip? Is "tftp" doing a DHCP/BOOTP operation to your DHCP server and getting an invalid server IP?
Disclaimer: I don't know off-hand if tftpboot does a DHCP operation. I get confused by the bootp, dhcp, and tftpboot commands - they are all the same but different.
Best regards, gvb
Dear E Robertson,
In message 3972542e0903250820w31586c26ke97d793083c5e8a2@mail.gmail.com you wrote:
In the current git source, I have the serverip config set but tftp complains about serverip not being set. I didn't see any changes to the source here. Am I missing something?
You have some serious misconfigurations in your default environment. I recommend only to add things there when you really know what you are doing.
printenv
baudrate=115200 ipaddr=192.168.0.200 serverip=192.168.0.100 gatewayip=192.168.0.1 netmask=255.255.255.0 hostname="Vincy"
There should not be any apostrophes in the value.
ethaddr=00:07:A6:00:6A:E6 bootdelay=5 bootargs= bootcmd=
Here you have created a strange problem which most probably confuses U-Boot. Make sure to fix these "empty" values.
Best regards,
Wolfgang Denk
On Wed, Mar 25, 2009 at 2:11 PM, Wolfgang Denk wd@denx.de wrote:
Dear E Robertson,
In message 3972542e0903250820w31586c26ke97d793083c5e8a2@mail.gmail.com you wrote:
In the current git source, I have the serverip config set but tftp complains about serverip not being set. I didn't see any changes to the source here. Am I missing something?
You have some serious misconfigurations in your default environment. I recommend only to add things there when you really know what you are doing.
printenv
baudrate=115200 ipaddr=192.168.0.200 serverip=192.168.0.100 gatewayip=192.168.0.1 netmask=255.255.255.0 hostname="Vincy"
There should not be any apostrophes in the value.
That seemed to be the problem. Don't know where that came from.
Thanks.
participants (3)
-
E Robertson -
Jerry Van Baren -
Wolfgang Denk