[PATCH 1/1] riscv: starfive: MMC card detect
The VisionFive 2 board uses GPIO 41 as card detect as documented in https://doc-en.rvspace.org/VisionFive2/PDF/SCH_RV002_V1.2A_20221216.pdf.
Signed-off-by: Heinrich Schuchardt heinrich.schuchardt@canonical.com --- arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi index f2c6bec9298..e11babc1cde 100644 --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi @@ -298,7 +298,7 @@ pinctrl-0 = <&mmc1_pins>; no-sdio; no-mmc; - broken-cd; + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; cap-sd-highspeed; post-power-on-delay-ms = <200>; status = "okay";
The VisionFive 2 board uses GPIO 41 as card detect as documented in https://doc-en.rvspace.org/VisionFive2/PDF/SCH_RV002_V1.2A_20221216.pdf.
Signed-off-by: Heinrich Schuchardt heinrich.schuchardt@canonical.com
arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi index f2c6bec9298..e11babc1cde 100644 --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi @@ -298,7 +298,7 @@ pinctrl-0 = <&mmc1_pins>; no-sdio; no-mmc;
- broken-cd;
- cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; cap-sd-highspeed; post-power-on-delay-ms = <200>; status = "okay";
-- 2.43.0
Acked-by: Minda Chen minda.chen@starfivetech.com
participants (2)
-
Heinrich Schuchardt -
Minda Chen