[U-Boot] [PATCH 1/2] [V2] AT91: Makes AT91SAM9261(9G10) SoC build correctly against u-boot-atmel/master
Rework for AT91SAM9261(9G10) SoC, makes it build again. Based on the work for AT91SAM9260-EK.
Signed-off-by: Hong Xu hong.xu@atmel.com --- arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 45 +++++------- arch/arm/include/asm/arch-at91/at91_spi.h | 2 +- arch/arm/include/asm/arch-at91/at91sam9261.h | 1 + .../arm/include/asm/arch-at91/at91sam9261_matrix.h | 77 +++++++++----------- 4 files changed, 56 insertions(+), 69 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c index b4353ef..3db2b20 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c @@ -26,74 +26,65 @@ #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> +#include <asm/io.h>
void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */ - writel(1 << AT91SAM9261_ID_US0, &pmc->pcer); + writel(1 << ATMEL_ID_USART0, &pmc->pcer); }
void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */ at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */ - writel(1 << AT91SAM9261_ID_US1, &pmc->pcer); + writel(1 << ATMEL_ID_USART1, &pmc->pcer); }
void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */ at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */ - writel(1 << AT91SAM9261_ID_US2, &pmc->pcer); + writel(1 << ATMEL_ID_USART2, &pmc->pcer); }
void at91_serial3_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ - writel(1 << AT91_ID_SYS, &pmc->pcer); + writel(1 << ATMEL_ID_SYS, &pmc->pcer); }
-void at91_serial_hw_init(void) +void at91_seriald_hw_init(void) { -#ifdef CONFIG_USART0 - at91_serial0_hw_init(); -#endif + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
-#ifdef CONFIG_USART1 - at91_serial1_hw_init(); -#endif + at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */
-#ifdef CONFIG_USART2 - at91_serial2_hw_init(); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_serial3_hw_init(); -#endif + writel(1 << ATMEL_ID_SYS, &pmc->pcer); }
#ifdef CONFIG_HAS_DATAFLASH void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */
/* Enable clock */ - writel(1 << AT91SAM9261_ID_SPI0, &pmc->pcer); + writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTA, 3, 1); @@ -123,14 +114,14 @@ void at91_spi0_hw_init(unsigned long cs_mask)
void at91_spi1_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* SPI1_MISO */ at91_set_a_periph(AT91_PIO_PORTB, 31, 0); /* SPI1_MOSI */ at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* SPI1_SPCK */
/* Enable clock */ - writel(1 << AT91SAM9261_ID_SPI1, &pmc->pcer); + writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTB, 28, 1); diff --git a/arch/arm/include/asm/arch-at91/at91_spi.h b/arch/arm/include/asm/arch-at91/at91_spi.h index c520e89..afe724d 100644 --- a/arch/arm/include/asm/arch-at91/at91_spi.h +++ b/arch/arm/include/asm/arch-at91/at91_spi.h @@ -33,7 +33,7 @@ typedef struct at91_spi { at91_pdc_t pdc; } at91_spi_t;
-#ifdef CONFIG_AT91_LEGACY +#ifdef CONFIG_ATMEL_LEGACY
#define AT91_SPI_CR 0x00 /* Control Register */ #define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ diff --git a/arch/arm/include/asm/arch-at91/at91sam9261.h b/arch/arm/include/asm/arch-at91/at91sam9261.h index c85fd29..afd7bd9 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9261.h +++ b/arch/arm/include/asm/arch-at91/at91sam9261.h @@ -126,6 +126,7 @@ */ #define ATMEL_PIO_PORTS 3 /* theese SoCs have 3 PIO */ #define ATMEL_BASE_PIO ATMEL_BASE_PIOA +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
/* * SoC specific defines diff --git a/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h index e2bfc4b..913b4d7 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h @@ -15,50 +15,45 @@ #ifndef AT91SAM9261_MATRIX_H #define AT91SAM9261_MATRIX_H
-#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#ifndef __ASSEMBLY__
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ +struct at91_matrix { + u32 mcfg; /* Master Configuration Registers */ + u32 scfg[5]; /* Slave Configuration Registers */ + u32 filler[6]; + u32 ebicsa; /* EBI Chip Select Assignment Register */ +}; +#endif /* __ASSEMBLY__ */
-#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18 +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */ -#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ +#define AT91_MATRIX_M0PR_SHIFT 0 +#define AT91_MATRIX_M1PR_SHIFT 4 +#define AT91_MATRIX_M2PR_SHIFT 8 +#define AT91_MATRIX_M3PR_SHIFT 12 +#define AT91_MATRIX_M4PR_SHIFT 16 +#define AT91_MATRIX_M5PR_SHIFT 20 + +#define AT91_MATRIX_RCB0 (1 << 0) +#define AT91_MATRIX_RCB1 (1 << 1) + +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) +#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif
Rework for AT91SAM9261(9G10)-EK, makes it build again. Based on the work for AT91SAM9260-EK.
Signed-off-by: Hong Xu hong.xu@atmel.com --- Makefile | 23 ----- board/atmel/at91sam9261ek/at91sam9261ek.c | 136 +++++++++++++++-------------- board/atmel/at91sam9261ek/config.mk | 1 - board/atmel/at91sam9261ek/led.c | 7 +- boards.cfg | 6 ++ include/configs/at91sam9261ek.h | 81 ++++++++++-------- 6 files changed, 128 insertions(+), 126 deletions(-) delete mode 100644 board/atmel/at91sam9261ek/config.mk
diff --git a/Makefile b/Makefile index 1619c47..cd328b3 100644 --- a/Makefile +++ b/Makefile @@ -766,29 +766,6 @@ M5485HFE_config : unconfig ## ARM926EJ-S Systems #########################################################################
-at91sam9261ek_nandflash_config \ -at91sam9261ek_dataflash_cs0_config \ -at91sam9261ek_dataflash_cs3_config \ -at91sam9261ek_config \ -at91sam9g10ek_nandflash_config \ -at91sam9g10ek_dataflash_cs0_config \ -at91sam9g10ek_dataflash_cs3_config \ -at91sam9g10ek_config : unconfig - @mkdir -p $(obj)include - @if [ "$(findstring 9g10,$@)" ] ; then \ - echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ - else \ - echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ - fi; - @if [ "$(findstring _nandflash,$@)" ] ; then \ - echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ - echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ - else \ - echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - fi; - @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 - at91sam9263ek_norflash_config \ at91sam9263ek_norflash_boot_config \ at91sam9263ek_nandflash_config \ diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index de5cfae..b6c7d9e 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -23,6 +23,7 @@ */
#include <common.h> +#include <asm/io.h> #include <asm/arch/at91sam9261.h> #include <asm/arch/at91sam9261_matrix.h> #include <asm/arch/at91sam9_smc.h> @@ -31,7 +32,6 @@ #include <asm/arch/at91_rstc.h> #include <asm/arch/clk.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> #include <lcd.h> #include <atmel_lcdc.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000) @@ -49,44 +49,48 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_CMD_NAND static void at91sam9261ek_nand_hw_init(void) { + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; unsigned long csa;
/* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, - csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; + + writel(csa, &matrix->ebicsa);
/* Configure SMC CS3 for NAND/SmartMedia */ #ifdef CONFIG_AT91SAM9G10EK - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); + writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(7) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(7), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7), + &smc->cs[3].cycle); #else - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); #endif - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_DBW_16 | + AT91_SMC_MODE_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_DBW_8 | + AT91_SMC_MODE_DBW_8 | #endif - AT91_SMC_TDF_(2)); + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode);
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); + writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
/* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -102,35 +106,37 @@ static void at91sam9261ek_nand_hw_init(void) #ifdef CONFIG_DRIVER_DM9000 static void at91sam9261ek_dm9000_hw_init(void) { + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + /* Configure SMC CS2 for DM9000 */ #ifdef CONFIG_AT91SAM9G10EK - at91_sys_write(AT91_SMC_SETUP(2), - AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(2), - AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) | - AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8)); - at91_sys_write(AT91_SMC_CYCLE(2), - AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20)); - at91_sys_write(AT91_SMC_MODE(2), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | - AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | - AT91_SMC_TDF_(1)); + writel(AT91_SMC_SETUP_NWE(3) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(3) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[2].setup); + writel(AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(8) | + AT91_SMC_PULSE_NRD(6) | AT91_SMC_PULSE_NCS_RD(8), + &smc->cs[2].pulse); + writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20), + &smc->cs[2].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 | + AT91_SMC_MODE_TDF_CYCLE(1), + &smc->cs[2].mode); #else - at91_sys_write(AT91_SMC_SETUP(2), - AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(2), - AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | - AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8)); - at91_sys_write(AT91_SMC_CYCLE(2), - AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); - at91_sys_write(AT91_SMC_MODE(2), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | - AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | - AT91_SMC_TDF_(1)); + writel(AT91_SMC_SETUP_NWE(3) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[2].setup); + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(8) | + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(8), + &smc->cs[2].pulse); + writel(AT91_SMC_CYCLE_NWE(16) | AT91_SMC_CYCLE_NRD(16), + &smc->cs[2].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 | + AT91_SMC_MODE_TDF_CYCLE(1), + &smc->cs[2].mode); #endif
/* Configure Reset signal as output */ @@ -156,7 +162,7 @@ vidinfo_t panel_info = { vl_vsync_len: 1, vl_upper_margin:1, vl_lower_margin:0, - mmio: AT91SAM9261_LCDC_BASE, + mmio: ATMEL_BASE_LCDC, };
void lcd_enable(void) @@ -171,6 +177,8 @@ void lcd_disable(void)
static void at91sam9261ek_lcd_hw_init(void) { + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ @@ -194,12 +202,11 @@ static void at91sam9261ek_lcd_hw_init(void) at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
- at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1); + writel(AT91_PMC_HCK1, &pmc->scer);
-#ifdef CONFIG_AT91SAM9G10EK - gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE; -#else - gd->fb_base = AT91SAM9261_SRAM_BASE; + /* For 9G10EK, let U-Boot allocate the framebuffer in SDRAM */ +#ifdef CONFIG_AT91SAM9261EK + gd->fb_base = ATMEL_BASE_SRAM; #endif }
@@ -217,7 +224,7 @@ void lcd_show_board_info(void) lcd_printf ("(C) 2008 ATMEL Corp\n"); lcd_printf ("at91support@atmel.com\n"); lcd_printf ("%s CPU at %s MHz\n", - CONFIG_SYS_AT91_CPU_NAME, + ATMEL_CPU_NAME, strmhz(temp, get_cpu_clk_rate()));
dram_size = 0; @@ -246,9 +253,9 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK; #endif /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_serial_hw_init(); + at91_seriald_hw_init(); #ifdef CONFIG_CMD_NAND at91sam9261ek_nand_hw_init(); #endif @@ -273,8 +280,9 @@ int board_eth_init(bd_t *bis)
int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; }
diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk deleted file mode 100644 index e554a45..0000000 --- a/board/atmel/at91sam9261ek/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x23f00000 diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c index 5d1c5f2..0c2f522 100644 --- a/board/atmel/at91sam9261ek/led.c +++ b/board/atmel/at91sam9261ek/led.c @@ -26,12 +26,15 @@ #include <asm/arch/at91sam9261.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> +#include <asm/arch/at91_pio.h> +#include <asm/io.h>
void coloured_LED_init(void) { + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA); + writel(ATMEL_ID_PIOA, &pmc->pcer);
at91_set_gpio_output(CONFIG_RED_LED, 1); at91_set_gpio_output(CONFIG_GREEN_LED, 1); diff --git a/boards.cfg b/boards.cfg index ac20c81..c91d6f5 100644 --- a/boards.cfg +++ b/boards.cfg @@ -83,6 +83,12 @@ at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0 at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1 +at91sam9261ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_NANDFLASH +at91sam9261ek_dataflash_cs0 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS0 +at91sam9261ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS3 +at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH +at91sam9g10ek_dataflash_cs0 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS0 +at91sam9g10ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS3 snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260 snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20 cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 401478b..9d4f8f3 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -27,36 +27,47 @@ #ifndef __CONFIG_H #define __CONFIG_H
-#define CONFIG_AT91_LEGACY - /* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ 1000
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#ifdef CONFIG_AT91SAM9G10EK -#define CONFIG_AT91SAM9G10 1 /* It's an Atmel AT91SAM9G10 SoC*/ +#ifdef CONFIG_AT91SAM9G10 +#define CONFIG_AT91SAM9G10EK 1 /* It's an Atmel AT91SAM9G10 EK*/ #else -#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ +#define CONFIG_AT91SAM9261EK 1 /* It's an Atmel AT91SAM9261 EK*/ #endif + +#include <asm/hardware.h> + #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1
#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_ATMEL_LEGACY +#define CONFIG_SYS_TEXT_BASE 0x21f00000 + /* * Hardware drivers */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* gpio */ +#define CONFIG_AT91_GPIO 1 +#define CONFIG_AT91_GPIO_PULLUP 1 + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200, 57600, 38400, 19200, 9600}
/* LCD */ #define CONFIG_LCD 1 @@ -65,14 +76,13 @@ #undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO 1 #define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_SYS_WHITE_ON_BLACK 1 +#define CONFIG_SYS_WHITE_ON_BLACK 1 #define CONFIG_ATMEL_LCD 1 #ifdef CONFIG_AT91SAM9261EK #define CONFIG_ATMEL_LCD_BGR555 1 -#else -#define CONFIG_AT91SAM9G10_LCD_BASE 0x23E00000 /* LCD is no more in SRAM */ #endif -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
/* LED */ #define CONFIG_AT91_LED @@ -108,8 +118,10 @@
/* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x04000000 +#define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
/* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI @@ -118,9 +130,9 @@ #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ -#define AT91_SPI_CLK 15000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24)
/* NAND flash */ #ifdef CONFIG_CMD_NAND @@ -153,8 +165,8 @@
/* USB */ #define CONFIG_USB_ATMEL -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */ #ifdef CONFIG_AT91SAM9G10EK @@ -163,12 +175,12 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" #endif #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_CMD_FAT 1
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x23e00000
#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 @@ -202,7 +214,7 @@ #else /* CONFIG_SYS_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_OFFSET 0x60000 #define CONFIG_ENV_OFFSET_REDUND 0x80000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ @@ -216,22 +228,19 @@
#endif
-#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } - #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_CMDLINE_EDITING 1
/* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */ +#define CONFIG_STACKSIZE (32*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ #error CONFIG_USE_IRQ not supported
Dear Hong Xu,
Rework for AT91SAM9261(9G10)-EK, makes it build again. Based on the work for AT91SAM9260-EK.
Signed-off-by: Hong Xu hong.xu@atmel.com
Makefile | 23 ----- board/atmel/at91sam9261ek/at91sam9261ek.c | 136 +++++++++++++++-------------- board/atmel/at91sam9261ek/config.mk | 1 - board/atmel/at91sam9261ek/led.c | 7 +- boards.cfg | 6 ++ include/configs/at91sam9261ek.h | 81 ++++++++++-------- 6 files changed, 128 insertions(+), 126 deletions(-) delete mode 100644 board/atmel/at91sam9261ek/config.mk
Applied to u-boot-atmel/master, Thanks, Reinhard
Dear Hong Xu,
Rework for AT91SAM9261(9G10) SoC, makes it build again. Based on the work for AT91SAM9260-EK.
Signed-off-by: Hong Xu hong.xu@atmel.com
arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 45 +++++------- arch/arm/include/asm/arch-at91/at91_spi.h | 2 +- arch/arm/include/asm/arch-at91/at91sam9261.h | 1 + .../arm/include/asm/arch-at91/at91sam9261_matrix.h | 77 +++++++++----------- 4 files changed, 56 insertions(+), 69 deletions(-)
diff --git a/arch/arm/include/asm/arch-at91/at91_spi.h b/arch/arm/include/asm/arch-at91/at91_spi.h index c520e89..afe724d 100644 --- a/arch/arm/include/asm/arch-at91/at91_spi.h +++ b/arch/arm/include/asm/arch-at91/at91_spi.h @@ -33,7 +33,7 @@ typedef struct at91_spi { at91_pdc_t pdc; } at91_spi_t;
-#ifdef CONFIG_AT91_LEGACY +#ifdef CONFIG_ATMEL_LEGACY
This was already fixed by another patch. But the endif statement was not...
#define AT91_SPI_CR 0x00 /* Control Register */ #define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
After fixing at91_spi.h applied to u-boot-atmel/master
Best Regards, Reinhard
participants (2)
-
Hong Xu -
Reinhard Meyer