[U-Boot] video/mx3fb: fix clock divider
From: Stefano Babic sbabic@denx.de
Fix clock divider for COM57H5M10XRC display. The previous setting caused flicker.
Tested on Qong (EVBLite with COM57H5M10XRC).
Signed-off-by: Stefano Babic sbabic@denx.de
---
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 7f04b49..893ec04 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -85,7 +85,7 @@ void lcd_panel_disable(void) #define V_END_WIDTH (7 + 3) /* lower_margin + vsync_len */ #define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL) #define IF_CONF 0 -#define IF_CLK_DIV 0x175 +#define IF_CLK_DIV 0x55 #else
Best regards,
Wolfgang Denk
On 12/16/2010 12:41 PM, Wolfgang Denk wrote:
From: Stefano Babic sbabic@denx.de
Fix clock divider for COM57H5M10XRC display. The previous setting caused flicker.
Tested on Qong (EVBLite with COM57H5M10XRC).
Signed-off-by: Stefano Babic sbabic@denx.de
It seems I forget to submit this patch....thanks for doing !
Best regards, Stefano Babic
Dear Stefano & Anatolij,
In message 20101216114147.D4AF3BB0BA@gemini.denx.de I wrote:
From: Stefano Babic sbabic@denx.de
Fix clock divider for COM57H5M10XRC display. The previous setting caused flicker.
Tested on Qong (EVBLite with COM57H5M10XRC).
Signed-off-by: Stefano Babic sbabic@denx.de
If both of you ACK I could pull this directly.
Best regards,
Wolfgang Denk
Hello Wolfgang,
On Thu, 16 Dec 2010 14:31:20 +0100 Wolfgang Denk wd@denx.de wrote:
Dear Stefano & Anatolij,
In message 20101216114147.D4AF3BB0BA@gemini.denx.de I wrote:
From: Stefano Babic sbabic@denx.de
Fix clock divider for COM57H5M10XRC display. The previous setting caused flicker.
Tested on Qong (EVBLite with COM57H5M10XRC).
Signed-off-by: Stefano Babic sbabic@denx.de
If both of you ACK I could pull this directly.
Acked-by: Anatolij Gustschin agust@denx.de
Thanks, Anatolij
On 12/16/2010 12:41 PM, Wolfgang Denk wrote:
From: Stefano Babic sbabic@denx.de
Fix clock divider for COM57H5M10XRC display. The previous setting caused flicker.
Tested on Qong (EVBLite with COM57H5M10XRC).
Signed-off-by: Stefano Babic sbabic@denx.de
Acked-by: Stefano Babic sbabic@denx.de
Best regards, Stefano Babic
In message 20101216114147.D4AF3BB0BA@gemini.denx.de you wrote:
From: Stefano Babic sbabic@denx.de
Fix clock divider for COM57H5M10XRC display. The previous setting caused flicker.
Tested on Qong (EVBLite with COM57H5M10XRC).
Signed-off-by: Stefano Babic sbabic@denx.de
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
Applied, thanks.
Best regards,
Wolfgang Denk
participants (3)
-
Anatolij Gustschin -
Stefano Babic -
Wolfgang Denk