W90P1 board support NAND and NOR Flash, IDE interface, optional LED for visualization. Changed makefile in /examples folder for support W90P710 SoC. --- MAINTAINERS | 13 ++- MAKEALL | 1 + Makefile | 3 + board/w90p1/Makefile | 53 ++++++++++ board/w90p1/config.mk | 24 +++++ board/w90p1/ide.c | 120 +++++++++++++++++++++ board/w90p1/led.c | 61 +++++++++++ board/w90p1/lowlevel_init.S | 124 ++++++++++++++++++++++ board/w90p1/nand.c | 106 +++++++++++++++++++ board/w90p1/u-boot.lds | 69 ++++++++++++ board/w90p1/w90p1.c | 95 +++++++++++++++++ examples/Makefile | 8 +- include/configs/W90P1.h | 240 +++++++++++++++++++++++++++++++++++++++++++ 13 files changed, 908 insertions(+), 9 deletions(-) create mode 100644 board/w90p1/Makefile create mode 100644 board/w90p1/config.mk create mode 100644 board/w90p1/ide.c create mode 100644 board/w90p1/led.c create mode 100644 board/w90p1/lowlevel_init.S create mode 100644 board/w90p1/nand.c create mode 100644 board/w90p1/u-boot.lds create mode 100644 board/w90p1/w90p1.c create mode 100644 include/configs/W90P1.h

diff --git a/MAINTAINERS b/MAINTAINERS index 38feac8..95b59dc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -62,7 +62,7 @@ Joe D'Abbraccio ljd015@freescale.com

MPC837xERDB MPC837x

-K?ri Dav??sson kd@flaga.is +K???ri Dav??????sson kd@flaga.is

FLAGADM MPC823

@@ -516,7 +516,7 @@ Peter Figuli peposh@etc.sk

wepep250 xscale

-Marius Gr?ger mag@sysgo.de +Marius Gr???ger mag@sysgo.de

impa7 ARM720T (EP7211) ep7312 ARM720T (EP7312) @@ -566,7 +566,7 @@ Nishanth Menon nm@ti.com

omap3_zoom1 ARM CORTEX-A8 (OMAP3xx SoC)

-David M?ller d.mueller@elsoft.ch +David M???ller d.mueller@elsoft.ch

smdk2410 ARM920T VCMA9 ARM920T @@ -646,7 +646,7 @@ Richard Woodruff r-woodruff2@ti.com

omap2420h4 ARM1136EJS

-Alex Z?pke azu@sysgo.de +Alex Z???pke azu@sysgo.de

lart SA1100 dnp1110 SA1110 @@ -655,6 +655,9 @@ Sergey Lapin slapin@ossfans.org

afeb9260 ARM926EJS (AT91SAM9260 SoC)

+Konstantin Vovk ksl@kslemb.com + w90p1 ARM720T (W90P710 SoC) + -------------------------------------------------------------------------

Unknown / orphaned boards: @@ -671,7 +674,7 @@ Unknown / orphaned boards: # Board CPU # #########################################################################

-Daniel Engstr?m daniel@omicron.se +Daniel Engstr???m daniel@omicron.se

sc520_cdp x86

diff --git a/MAKEALL b/MAKEALL index cf05133..02b8595 100755 --- a/MAKEALL +++ b/MAKEALL @@ -481,6 +481,7 @@ LIST_ARM7=" \ lpc2292sodimm \ modnet50 \ SMN42 \ + w90p1 \ "

######################################################################### diff --git a/Makefile b/Makefile index 787c5f2..bbc62bb 100644 --- a/Makefile +++ b/Makefile @@ -2916,6 +2916,9 @@ lpc2292sodimm_config: unconfig SMN42_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292

+W90P1_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm720t w90p1 + ######################################################################### ## ARM CORTEX Systems ######################################################################### diff --git a/board/w90p1/Makefile b/board/w90p1/Makefile new file mode 100644 index 0000000..d4d1cba --- /dev/null +++ b/board/w90p1/Makefile @@ -0,0 +1,53 @@ + +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_CMD_NAND) += nand.o +COBJS-$(CONFIG_CMD_IDE) += ide.o +COBJS-$(CONFIG_STATUS_LED) += led.o + +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend +######################################################################### diff --git a/board/w90p1/config.mk b/board/w90p1/config.mk new file mode 100644 index 0000000..34f8978 --- /dev/null +++ b/board/w90p1/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x01FC0000 diff --git a/board/w90p1/ide.c b/board/w90p1/ide.c new file mode 100644 index 0000000..0c370b5 --- /dev/null +++ b/board/w90p1/ide.c @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2008 + * KSL Embedded Development Team <www.kslemb.com> + * Konstantin Vovk ksl@kslemb.com + * + * IDE interface for Winbond W90P710 ARM7 SoC + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <asm/hardware.h> + +#if defined(CONFIG_CMD_IDE) +#include <ata.h> +#include <ide.h> + +/* + * Define the start address of the IDE_CS0 region (0x73000000 but we wr/rd to + * the 0xF3000000 for disable internal cache memory MSB=1) + * Start Address for IDE CS0 - mapped to the EBI ECS1 + */ +#define EXT1_BASE 0xF3000000 +/* Define the start address of the IDE_CS1 region (0x74000000 but we wr/rd to + * the 0xF4000000 for disable internal cache memory MSB=1) + * Start Address for IDE CS1 - mapped to the EBI ECS2 + */ +#define EXT2_BASE 0xF4000000 + +/* Config bits for ECS1 and ECS2 */ + +#define SIZE_256k (0 << 16) /* Memory size is 256K */ +#define SIZE_512k (1 << 16) /* Memory size is 512K */ +#define SIZE_1M (2 << 16) /* Memory size is 1M */ +#define SIZE_16M (6 << 16) /* Memory size is 16M */ +#define SIZE_32M (7 << 16) /* Memory size is 32M */ + +#define ADRS (1 << 15) +#define tACC (15 << 11) /* Access cycles of external I/O bank */ +#define tCOH (7 << 8) /* Chip selection hold time */ +#define tACS (7 << 5) /* Address set-up before nECS */ +#define tCOS (7 << 2) /* Chip selection setup time */ + +#define BUS16 (2) /* 16-bit bus width for IDE */ +#define BUS08 (1) /* 8-bit bus width for IDE */ + +#define BUS_SETTINGS (SIZE_256k | ADRS | tACC | tCOH | tACS | tCOS) +#define BUS_16BIT (BUS_SETTINGS | BUS16) +#define BUS_8BIT (BUS_SETTINGS | BUS08) + +/* IDE_CS0 with 16bit data bus */ +#define ENABLE16() PUT_REG(REG_EXT1CON, ((EXT1_BASE << 1) | BUS_16BIT)) +/* IDE_CS0 with 8bit data bus */ +#define DISABLE16() PUT_REG(REG_EXT1CON, ((EXT1_BASE << 1) | BUS_8BIT)) + +void outb (unsigned char val, volatile unsigned char *addr) +{ + *(addr) = val; +} + +unsigned char inb (volatile unsigned char *addr) +{ + volatile unsigned char c; + + c = *(addr); + return c; +} + +/* IDE work with Data Port via 16-bit BUS that's why we must first of all + * enable 16-bit bus on ECS1, read/write data to the Data Port, and finaly + * disable 16-bit wide data bus + */ +void insw (unsigned short *addr, unsigned short *sect_buf, int words) +{ + int i; + + ENABLE16 (); + for (i = 0; i < words; i++) + *(sect_buf + i) = *(addr); + DISABLE16 (); +} + +void outsw (unsigned short *addr, unsigned short *sect_buf, int words) +{ + int i; + + ENABLE16 (); + for (i = 0; i < words; i++) + *(addr) = *(sect_buf + i); + DISABLE16 (); +} + +int ide_preinit (void) +{ + /* Init IDE_CS0 with 8bit data bus */ + PUT_REG (REG_EXT1CON, ((EXT1_BASE << 1) | BUS_8BIT)); + /* Init IDE_CS1 with 8bit data bus */ + PUT_REG (REG_EXT2CON, ((EXT2_BASE << 1) | BUS_8BIT)); + /* Enable nWE as a write strob for ECS1 and ECS2 */ + PUT_REG (REG_EBICON, GET_REG(REG_EBICON) | (1 << 25) | (1 << 26)); + + return 0; +} +#endif diff --git a/board/w90p1/led.c b/board/w90p1/led.c new file mode 100644 index 0000000..ee6cb21 --- /dev/null +++ b/board/w90p1/led.c @@ -0,0 +1,61 @@ +/*********************************************************************** + * (C) Copyright 2008 + * KSL Embedded Development Team <www.kslemb.com> + * Konstantin Vovk ksl@kslemb.com + * + * Defines helper functions for toggeling LEDs + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ***********************************************************************/ +#include <common.h> +#include <asm/hardware.h> + +#ifdef CONFIG_STATUS_LED +#include <status_led.h> + +void __led_init (led_id_t mask, int state) +{ + unsigned int *dir = (unsigned int *)STATUS_LED_DIR; + unsigned int *port = (unsigned int *)STATUS_LED_PORT; + + *dir = mask; + if (state == STATUS_LED_ON) + *port &= ~mask; + else + *port |= mask; +} + +void __led_toggle (led_id_t mask) +{ + unsigned int *port = (unsigned int *)STATUS_LED_PORT; + unsigned int val; + + val = *port; + val ^= mask; + *port = val; +} + +void __led_set (led_id_t mask, int state) +{ + unsigned int *port = (unsigned int *)STATUS_LED_PORT; + + if (state == STATUS_LED_ON) + *port &= ~mask; + else + *port |= mask; +} +#endif /* CONFIG_STATUS_LED */ diff --git a/board/w90p1/lowlevel_init.S b/board/w90p1/lowlevel_init.S new file mode 100644 index 0000000..83c40a3 --- /dev/null +++ b/board/w90p1/lowlevel_init.S @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2008 + * KSL Embedded Development Team <www.kslemb.com> + * Konstantin Vovk ksl@kslemb.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/hardware.h> + +/* + * Configure Memory Map + * + * This memory map allows us to relocate from FLASH to SRAM. After + * power-on reset the CPU only knows about the FLASH memory at address + * 0x00000000. After lowlevel_init completes the memory map will be: + * + * Memory Addr + * 0x00000000 to 0x02000000 - 32MB on board SDRAM via DD6 and DD7 + * 0x7F000000 to 0x7F200000 - 2MB(16Bit) on board Flash M29W320ET via DD8 + * + * Load all 6 memory registers with the STMIA instruction since + * memory access is disabled once these registers are written. + * The last register written re-enables memory access. + */ + +/* Clock Skew Control register */ +#define CKSKEW 0xFFF01F00 + +.globl lowlevel_init +lowlevel_init: + + /* Check version number of W90P710 to set the clock skew + * The clock skew of W90P710 ver A = 0x7A + * The clock skew of W90P710 ver B = 0x39 + */ + LDR r0, =REG_PDID + LDR r0, [r0] + LDR r1, =0x0F000000 + ANDS r0,r0,r1 + BEQ ver0 + LDR r1, =0x01000000 + CMP r0, r1 + BEQ ver1 + B unknow_version +ver0: + LDR r0, =0x0FF007A + B skew_update +ver1: + LDR r0, =0x0FF0039 +skew_update: + LDR r1, =CKSKEW + STR r0,[r1] +unknow_version: + /* Nothing to do */ + + /* preserve the temp register (r12 AKA ip) and remap it. */ + LDR r1, =SRAM_BASE+0xC + ADD r0, r12, #CONFIG_SYS_FLASH_BASE + STR r0, [r1] + + /* remap the link register for when we return */ + ADD lr, lr, #CONFIG_SYS_FLASH_BASE + + /* store a short program in the on chip SRAM, which is + * unaffected when remapping memory. Note the cache must be + * disabled for the on chip SRAM to be available. + */ + LDR r1, =SRAM_BASE + LDR r0, =0xe880007e /* stmia r0, {r1-r6} */ + STR r0, [r1] /* write init values to EBICON...SDTIME1 */ + ADD r1, r1, #4 + LDR r0, =0xe59fc000 /* ldr r12, [pc, #0] - restore remaped ip */ + STR r0, [r1] + ADD r1, r1, #4 + LDR r0, =0xe1a0f00e /* mov pc, lr - return from branch */ + STR r0, [r1] + + ADR r0, InitData /* Load start address of the Init data */ + LDMIA r0, {r1-r6} /* Load six bytes of the Init data to r1...r6*/ + + LDR r0, =REG_EBICON /* Load the address of the EBICON register */ + LDR pc, =SRAM_BASE /* execute relocation programm */ + +.globl reset_cpu +reset_cpu: + + LDR r1, =REG_CLKSEL /* Set RESET bit in CLKSEL register */ + LDR r0, =0x01 + STR r0, [r1] + +wait_loop: + b wait_loop /* never return */ + + /* + * Below are six 32-bit values for the six memory registers of + * the system manager, starting with register EBICON + */ + InitData: + /* Default configuration */ + .long 0x000530C0 /* EBICON */ + .long 0xFE040080 /* ROMCON(Flash) - M29W320ET */ + .long 0x000090ED /* SDCONF0(SDRAM) - 32M(16Mx16x2) */ + .long 0x00000000 /* SDCONF1 - We don't use second bank */ + .long 0x0000014B /* SDTIME0 */ + .long 0x0000014B /* SDTIME1 */ diff --git a/board/w90p1/nand.c b/board/w90p1/nand.c new file mode 100644 index 0000000..ea36123 --- /dev/null +++ b/board/w90p1/nand.c @@ -0,0 +1,106 @@ +/* + * (C) Copyright 2008 + * KSL Embedded Development Team <www.kslemb.com> + * Konstantin Vovk ksl@kslemb.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + + Date Version Description + 16.01.2009 v1.1 Updated w90p710_nand_hwcontrol function. + for support new U-Boot 2009 + */ +#include <asm/io.h> +#include <common.h> +#include <asm/hardware.h> + +#if defined(CONFIG_CMD_NAND) +#include <nand.h> + +/* W90P710 EBI Config bits */ +#define SIZE_256k (0 << 16) /* Memory size is 256K */ +#define SIZE_512k (1 << 16) /* Memory size is 512K */ +#define SIZE_1M (2 << 16) /* Memory size is 1M */ +#define SIZE_16M (6 << 16) /* Memory size is 16M */ +#define SIZE_32M (7 << 16) /* Memory size is 32M */ + +#define ADRS (1 << 15) /* Bus alignment to the byte address */ +#define tACC (7 << 11) /* Access cycles of external I/O bank */ +#define tCOH (7 << 8) /* Chip selection hold time */ +#define tACS (7 << 5) /* Address set-up before nECS */ +#define tCOS (7 << 2) /* Chip selection setup time */ +#define BUS08 (1) /* Bus is 8 bit wide */ + +#define BUS_SETTINGS (SIZE_16M | ADRS | tACC | tCOH | tACS | tCOS | BUS08) +/* + * Define the start address of the CS0 region (0x72000000 but we wr/rd to the + * 0xF2000000 for disable internal cache memory) + */ +#define EXT0_BASE 0xF2000000 + +/* Hardware specific access to control-lines */ +void w90p710_nand_hwcontrol (struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + ulong base = (ulong) this->IO_ADDR_W; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + base = (base | W90P710_NAND_CLE); + else + base = (base & ~W90P710_NAND_CLE); + if (ctrl & NAND_ALE) + base = (base | W90P710_NAND_ALE); + else + base = (base & ~W90P710_NAND_ALE); + + this->IO_ADDR_W = (void __iomem *) ( base ); + } + + this->IO_ADDR_R = this->IO_ADDR_W; + + if (cmd != NAND_CMD_NONE) + writeb (cmd, this->IO_ADDR_W); +} + +/* We use nWait pin that's why we don't think abot ready */ +int w90p710_nand_ready(struct mtd_info *mtd) +{ + return (1); +} + +/* + * Board-specific NAND initialization. + */ +int board_nand_init (struct nand_chip *nand) +{ + /* + * Init CS0 with 8bit data bus 16M bank space + * (we use A21 for ALE and A20 CLE) + */ + PUT_REG (REG_EXT0CON, ((EXT0_BASE << 1) | BUS_SETTINGS)); + /* Enable nWE as a write strob for CS0 */ + PUT_REG (REG_EBICON, GET_REG(REG_EBICON) | (1 << 24)); + + nand->cmd_ctrl = w90p710_nand_hwcontrol; + nand->ecc.mode = NAND_ECC_SOFT; + nand->dev_ready = w90p710_nand_ready; + nand->chip_delay = 30; + return 0; +} +#endif diff --git a/board/w90p1/u-boot.lds b/board/w90p1/u-boot.lds new file mode 100644 index 0000000..cafe841 --- /dev/null +++ b/board/w90p1/u-boot.lds @@ -0,0 +1,69 @@ +/* + * (C) Copyright 2000-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm720t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss (NOLOAD) : { *(.bss) } + _end = .; + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/board/w90p1/w90p1.c b/board/w90p1/w90p1.c new file mode 100644 index 0000000..81d7ad8 --- /dev/null +++ b/board/w90p1/w90p1.c @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2008 + * KSL Embedded Development Team <www.kslemb.com> + * Konstantin Vovk ksl@kslemb.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/hardware.h> +#include <command.h> + +#ifdef CONFIG_STATUS_LED +#include <status_led.h> +#endif + +#ifdef CONFIG_DRIVER_W90P710_ETH +#include <net.h> +#include <netdev.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; +#define MACH_W90X700 1861 +/* + * Miscelaneous platform dependent initialisations + */ +int board_init (void) +{ + /* arch number MACH_TYPE_W90P710 */ + gd->bd->bi_arch_number = MACH_W90X700; + + /* location of boot parameters */ + gd->bd->bi_boot_params = 0x00000800; + +#ifdef CONFIG_STATUS_LED + status_led_set (STATUS_LED_BOOT, STATUS_LED_ON); +#endif + return (0); +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + +#if CONFIG_NR_DRAM_BANKS == 2 + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +#endif + + return (0); +} + +#if defined(CONFIG_DRIVER_W90P710_ETH) +int board_eth_init (bd_t *bis) +{ + return W90P710_EMC_initialize (bis); +} +#endif + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ + PHY_Reset (); +} +#endif + +#ifdef CONFIG_MISC_INIT_R +/* miscellaneous platform dependent initialisations */ +int misc_init_r (void) +{ +#ifdef CONFIG_CMD_IDE + extern int ide_preinit (void); + /* Init ECS1 and ECS2 for working with memory mapped IDE */ + ide_preinit (); +#endif + return (0); +} +#endif diff --git a/examples/Makefile b/examples/Makefile index 927010d..86636b5 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -33,10 +33,10 @@ ifeq ($(ARCH),arm) ifeq ($(BOARD),omap2420h4) LOAD_ADDR = 0x80300000 else -ifeq ($(CPU),omap3) -LOAD_ADDR = 0x80300000 -else -LOAD_ADDR = 0xc100000 + ifeq ($(BOARD),w90p1) + LOAD_ADDR = 0x00001000 + else + LOAD_ADDR = 0xc100000 endif endif endif diff --git a/include/configs/W90P1.h b/include/configs/W90P1.h new file mode 100644 index 0000000..6e218ae --- /dev/null +++ b/include/configs/W90P1.h @@ -0,0 +1,240 @@ +/* + * (C) Copyright 2008 + * KSL Embedded Development Team <www.kslemb.com> + * Konstantin Vovk ksl@kslemb.com + * + * Configuation settings for W90P1 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start u-boot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + * + * #define CONFIG_SKIP_LOWLEVEL_INIT + */ + +/* + * High Level Configuration Options + * + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */ +#define CONFIG_W90P710 1 /* it's a W90P710 chip */ +#define CONFIG_W90P1 1 /* on an W90P1 Board */ + +#define CONFIG_IDENT_STRING "\nKSL uBoot port for W90P710 SoC v1.1" + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_W90P710_ETH 1 +#define CONFIG_DRIVER_W90P710_UART 1 +#define CONFIG_DRIVER_W90P710_FLASH 1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART0 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +/* + * BOOTP options + */ + +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +/* + * Board miscellaneous initializations: Init ECS1 and ECS2 for work with IDE bus + */ +#define CONFIG_MISC_INIT_R 1 + +/* Enable NAND Flash support */ +#define CONFIG_CMD_NAND 1 + +/* Enable IDE support */ +#define CONFIG_CMD_IDE 1 + +/* Enable status LED */ +#define CONFIG_STATUS_LED 1 + +/* If board support NAND flash */ +#if defined (CONFIG_CMD_NAND) + +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define W90P710_NAND_BASE 0xF2000000 +#define W90P710_NAND_CLE (1 << 20) /* CLE Address line */ +#define W90P710_NAND_ALE (1 << 21) /* ALE Address line */ +/* Base Address of the memory mapped NAND flash interface */ +#define CONFIG_SYS_NAND_BASE W90P710_NAND_BASE + +#endif /* CONFIG_CMD_NAND */ + +/* If board support IDE interface */ +#if defined (CONFIG_CMD_IDE) + +#define CONFIG_DOS_PARTITION 1 + +/* W90P710 memory mapped IDE/ATA stuff */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max is 1 IDE bus */ +/* max 1 drive per IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS * 1) + +/* W90P1 board implements work with Data and registers via ECS1*/ +#define CONFIG_SYS_ATA_BASE_ADDR 0xF3000000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ +/* CONFIG_SYS_ATA_ALT_OFFSET is used for work with Control Block [CBR] + * registers with A0...A2 = 0x6,0x7 + * uBoot used only 0x6 - Alter Status/Device Control register + * W90P1 board implements work with CBR via ECS2 + */ +/* Offset for alternate registers must be identical to (EXT2_BASE-EXT1_BASE) */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x01000000 + +#endif /* CONFIG_CMD_IDE */ + +/* If board support Status LED */ +#if defined (CONFIG_STATUS_LED) + +#define CONFIG_BOARD_SPECIFIC_LED 1 + +#define STATUS_LED_BIT 0x00000004 /* GPIO2 pin 60 */ +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4) /* 250ms */ +#define STATUS_LED_STATE STATUS_LED_BLINKING +#define STATUS_LED_ACTIVE 0 /* LED on for bit is '0' */ +#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ +#define STATUS_LED_DIR 0xFFF83004 /* GPIO Direction register */ +#define STATUS_LED_PORT 0xFFF83008 /* GPIO Data output register */ + +#endif /* CONFIG_STATUS_LED */ + +/* Enable Ping command */ +#define CONFIG_CMD_PING +/* Enable one or more MAC's support */ +#define CONFIG_NET_MULTI + +#define CONFIG_ETHADDR 00:40:95:36:35:33 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.0.84 +#define CONFIG_SERVERIP 192.168.0.4 + +/* Enable PHY Reset after MAC Init */ +/*#define CONFIG_RESET_PHY_R*/ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_BOOTDELAY 2 /* delay for automatic boot */ +/*#define CONFIG_SYS_AUTOLOAD "no"*/ /*rarpb, bootp or dhcp commands will perform only*/ + +#define CONFIG_LOADADDR 0x8000 /* default load address */ +#define CONFIG_BOOTCOMMAND "bootm 0x7F090000" /* Start uClinux from NOR Flash */ +/*#define CONFIG_BOOTCOMMAND "tftp 0x8000 uImage"*/ + +#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/hda1 rw" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "->" /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* allow passing of command line args to linux */ +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x01F00000 /* 31 MB in DRAM */ + + +#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* Linux kernel load address */ + +#define CONFIG_SYS_CLK_FREQ 80000000 /* CPU freq: 80 MHz */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 KHz */ + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +/* + * Physical Memory Map after relocation + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +/* U-Boot code can handle detection of the flash automatically */ +#define CONFIG_SYS_FLASH_CFI 1 /* FLASH is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */ +#define CONFIG_FLASH_CFI_AMD_RESET /* Reset command is F0 */ + +#define CONFIG_SYS_FLASH_BASE 0x7F000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 71 /* M29W320EB have 71 */ + +/* environment settings */ +#define CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_NOWHERE +/* Environment start address 256K used for uBoot*/ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) +/* Size of Environment Sector - 64K */ +#define CONFIG_ENV_SECT_SIZE 0x10000 + +#define CONFIG_ENV_SIZE 0x1000 /* Ssize for environment 4K */ +#define CONFIG_FLASH_SHOW_PROGRESS 15 /* Show Flash write progress */ + +#endif /* __CONFIG_H */