[U-Boot] [PATCH] mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so fix this by moving it to Kconfig.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com --- configs/mx7ulp_evk_defconfig | 1 + include/configs/mx7ulp_evk.h | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig index d630113..0470fbd 100644 --- a/configs/mx7ulp_evk_defconfig +++ b/configs/mx7ulp_evk_defconfig @@ -4,6 +4,7 @@ CONFIG_TARGET_MX7ULP_EVK=y CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg" CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index a7992ea..56d74e9 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -90,7 +90,6 @@ #define PHYS_SDRAM_SIZE SZ_1G #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_CMD_BOOTZ
#define CONFIG_LOADADDR 0x60800000
-----Original Message----- From: Fabio Estevam [mailto:fabio.estevam@nxp.com] Sent: Thursday, September 28, 2017 2:01 AM To: sbabic@denx.de Cc: Peng Fan peng.fan@nxp.com; u-boot@lists.denx.de; Fabio Estevam fabio.estevam@nxp.com Subject: [PATCH] mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so fix this by moving it to Kconfig.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com
Reviewed-by: Peng Fan peng.fan@nxp.com
configs/mx7ulp_evk_defconfig | 1 + include/configs/mx7ulp_evk.h | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig index d630113..0470fbd 100644 --- a/configs/mx7ulp_evk_defconfig +++ b/configs/mx7ulp_evk_defconfig @@ -4,6 +4,7 @@ CONFIG_TARGET_MX7ULP_EVK=y CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/i mximage.cfg" CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index a7992ea..56d74e9 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -90,7 +90,6 @@ #define PHYS_SDRAM_SIZE SZ_1G #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_CMD_BOOTZ
#define CONFIG_LOADADDR 0x60800000
-- 2.7.4
On 27/09/2017 20:00, Fabio Estevam wrote:
CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so fix this by moving it to Kconfig.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com
configs/mx7ulp_evk_defconfig | 1 + include/configs/mx7ulp_evk.h | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig index d630113..0470fbd 100644 --- a/configs/mx7ulp_evk_defconfig +++ b/configs/mx7ulp_evk_defconfig @@ -4,6 +4,7 @@ CONFIG_TARGET_MX7ULP_EVK=y CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg" CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index a7992ea..56d74e9 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -90,7 +90,6 @@ #define PHYS_SDRAM_SIZE SZ_1G #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_CMD_BOOTZ
#define CONFIG_LOADADDR 0x60800000
Applied to u-boot-imx, -master, thanks !
Best regards, Stefano Babic
participants (3)
-
Fabio Estevam -
Peng Fan -
Stefano Babic