[U-Boot] [PATCH] sh_spi: Add 4 chip select signals supporting
The module has 4 chip select signals. This patch supports it.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com --- drivers/spi/sh_spi.c | 19 ++++++++++++++++--- drivers/spi/sh_spi.h | 4 +++- 2 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/sh_spi.c b/drivers/spi/sh_spi.c index 78c7f1a..e944b23 100644 --- a/drivers/spi/sh_spi.c +++ b/drivers/spi/sh_spi.c @@ -1,7 +1,7 @@ /* * SH SPI driver * - * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011-2012 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -82,6 +82,19 @@ void spi_init(void) { }
+static void sh_spi_set_cs(struct sh_spi *ss, unsigned int cs) +{ + unsigned long val = 0; + + if (cs & 0x01) + val |= SH_SPI_SSS0; + if (cs & 0x02) + val |= SH_SPI_SSS1; + + sh_spi_clear_bit(SH_SPI_SSS0 | SH_SPI_SSS1, &ss->regs->cr4); + sh_spi_set_bit(val, &ss->regs->cr4); +} + struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { @@ -104,6 +117,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, sh_spi_write(0x00, &ss->regs->cr1); /* CR3 init */ sh_spi_write(0x00, &ss->regs->cr3); + sh_spi_set_cs(ss, cs);
clear_fifo(ss);
@@ -242,8 +256,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
int spi_cs_is_valid(unsigned int bus, unsigned int cs) { - /* This driver supports "bus = 0" and "cs = 0" only. */ - if (!bus && !cs) + if (!bus && cs < SH_SPI_NUM_CS) return 1; else return 0; diff --git a/drivers/spi/sh_spi.h b/drivers/spi/sh_spi.h index dd8f937..96b4b68 100644 --- a/drivers/spi/sh_spi.h +++ b/drivers/spi/sh_spi.h @@ -60,10 +60,12 @@ struct sh_spi_regs { #define SH_SPI_TBFI 0x40 #define SH_SPI_RBEI 0x20 #define SH_SPI_RBFI 0x10 +#define SH_SPI_SSS1 0x08 #define SH_SPI_WPABRT 0x04 -#define SH_SPI_SSS 0x01 +#define SH_SPI_SSS0 0x01
#define SH_SPI_FIFO_SIZE 32 +#define SH_SPI_NUM_CS 4
struct sh_spi { struct spi_slave slave;
Applied. Thanks,
Nobuhiro
2012/3/6 Shimoda, Yoshihiro yoshihiro.shimoda.uh@renesas.com:
The module has 4 chip select signals. This patch supports it.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com
drivers/spi/sh_spi.c | 19 ++++++++++++++++--- drivers/spi/sh_spi.h | 4 +++- 2 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/sh_spi.c b/drivers/spi/sh_spi.c index 78c7f1a..e944b23 100644 --- a/drivers/spi/sh_spi.c +++ b/drivers/spi/sh_spi.c @@ -1,7 +1,7 @@ /* * SH SPI driver *
- Copyright (C) 2011 Renesas Solutions Corp.
- Copyright (C) 2011-2012 Renesas Solutions Corp.
* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -82,6 +82,19 @@ void spi_init(void) { }
+static void sh_spi_set_cs(struct sh_spi *ss, unsigned int cs) +{
- unsigned long val = 0;
- if (cs & 0x01)
- val |= SH_SPI_SSS0;
- if (cs & 0x02)
- val |= SH_SPI_SSS1;
- sh_spi_clear_bit(SH_SPI_SSS0 | SH_SPI_SSS1, &ss->regs->cr4);
- sh_spi_set_bit(val, &ss->regs->cr4);
+}
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { @@ -104,6 +117,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, sh_spi_write(0x00, &ss->regs->cr1); /* CR3 init */ sh_spi_write(0x00, &ss->regs->cr3);
- sh_spi_set_cs(ss, cs);
clear_fifo(ss);
@@ -242,8 +256,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
int spi_cs_is_valid(unsigned int bus, unsigned int cs) {
- /* This driver supports "bus = 0" and "cs = 0" only. */
- if (!bus && !cs)
- if (!bus && cs < SH_SPI_NUM_CS)
return 1; else return 0; diff --git a/drivers/spi/sh_spi.h b/drivers/spi/sh_spi.h index dd8f937..96b4b68 100644 --- a/drivers/spi/sh_spi.h +++ b/drivers/spi/sh_spi.h @@ -60,10 +60,12 @@ struct sh_spi_regs { #define SH_SPI_TBFI 0x40 #define SH_SPI_RBEI 0x20 #define SH_SPI_RBFI 0x10 +#define SH_SPI_SSS1 0x08 #define SH_SPI_WPABRT 0x04 -#define SH_SPI_SSS 0x01 +#define SH_SPI_SSS0 0x01
#define SH_SPI_FIFO_SIZE 32 +#define SH_SPI_NUM_CS 4
struct sh_spi { struct spi_slave slave; -- 1.7.1
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
participants (2)
-
Nobuhiro Iwamatsu -
Shimoda, Yoshihiro