Commit 77c1458d caused the following compiler warnings:

fsl_esdhc.c: In function 'esdhc_pio_read_write': fsl_esdhc.c:142: warning: assignment discards qualifiers from pointer target type fsl_esdhc.c: In function 'esdhc_setup_data': fsl_esdhc.c:169: warning: unused variable 'wml_value' fsl_esdhc.c: In function 'esdhc_pio_read_write': fsl_esdhc.c:164: warning: control reaches end of non-void function

Fix these.

Signed-off-by: Wolfgang Denk wd@denx.de Cc: Dipen Dudhat dipen.dudhat@freescale.com Cc: Andy Fleming afleming@freescale.com --- drivers/mmc/fsl_esdhc.c | 34 +++++++++++++++++----------------- 1 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index a9b07a9..a368fe6 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -103,7 +103,7 @@ uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) /* * PIO Read/Write Mode reduce the performace as DMA is not used in this mode. */ -static int +static void esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data) { struct fsl_esdhc *regs = mmc->priv; @@ -125,7 +125,7 @@ esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data) && --timeout); if (timeout <= 0) { printf("\nData Read Failed in PIO Mode."); - return timeout; + return; } while (size && (!(irqstat & IRQSTAT_TC))) { udelay(100); /* Wait before last byte transfer complete */ @@ -139,7 +139,7 @@ esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data) } } else { blocks = data->blocks; - buffer = data->src; + buffer = (char *)data->src; while (blocks) { timeout = PIO_TIMEOUT; size = data->blocksize; @@ -148,7 +148,7 @@ esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data) && --timeout); if (timeout <= 0) { printf("\nData Write Failed in PIO Mode."); - return timeout; + return; } while (size && (!(irqstat & IRQSTAT_TC))) { udelay(100); /* Wait before last byte transfer complete */ @@ -166,22 +166,12 @@ esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)

static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) { - uint wml_value; int timeout; struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; +#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO + uint wml_value;

-#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO - if (!(data->flags & MMC_DATA_READ)) { - if ((esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) { - printf("\nThe SD card is locked. " - "Can not write to a locked card.\n\n"); - return TIMEOUT; - } - esdhc_write32(&regs->dsaddr, (u32)data->src); - } else - esdhc_write32(&regs->dsaddr, (u32)data->dest); -#else wml_value = data->blocksize/4;

if (data->flags & MMC_DATA_READ) { @@ -202,7 +192,17 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) wml_value << 16); esdhc_write32(&regs->dsaddr, (u32)data->src); } -#endif +#else /* CONFIG_SYS_FSL_ESDHC_USE_PIO */ + if (!(data->flags & MMC_DATA_READ)) { + if ((esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) { + printf("\nThe SD card is locked. " + "Can not write to a locked card.\n\n"); + return TIMEOUT; + } + esdhc_write32(&regs->dsaddr, (u32)data->src); + } else + esdhc_write32(&regs->dsaddr, (u32)data->dest); +#endif /* CONFIG_SYS_FSL_ESDHC_USE_PIO */

esdhc_write32(&regs->blkattr, data->blocks << 16 | data->blocksize);