Add new board SMDKC100 that uses s5pc100 SoC

Signed-off-by: Minkyu Kang mk7.kang@samsung.com Signed-off-by: HeungJun, Kim riverful.kim@samsung.com --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/samsung/smdkc100/Makefile | 54 +++++++ board/samsung/smdkc100/config.mk | 16 ++ board/samsung/smdkc100/lowlevel_init.S | 221 +++++++++++++++++++++++++++++ board/samsung/smdkc100/mem_setup.S | 198 ++++++++++++++++++++++++++ board/samsung/smdkc100/onenand.c | 98 +++++++++++++ board/samsung/smdkc100/smdkc100.c | 51 +++++++ board/samsung/smdkc100/u-boot.lds | 63 +++++++++ include/configs/smdkc100.h | 240 ++++++++++++++++++++++++++++++++ 11 files changed, 949 insertions(+), 0 deletions(-) create mode 100644 board/samsung/smdkc100/Makefile create mode 100644 board/samsung/smdkc100/config.mk create mode 100644 board/samsung/smdkc100/lowlevel_init.S create mode 100644 board/samsung/smdkc100/mem_setup.S create mode 100644 board/samsung/smdkc100/onenand.c create mode 100644 board/samsung/smdkc100/smdkc100.c create mode 100644 board/samsung/smdkc100/u-boot.lds create mode 100644 include/configs/smdkc100.h

diff --git a/MAINTAINERS b/MAINTAINERS index e4f3dee..5a93fa9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -721,6 +721,10 @@ Alex Z lart SA1100 dnp1110 SA1110

+Minkyu Kang mk7.kang@samsung.com + + SMDKC100 ARM CORTEX-A8 (S5PC100 SoC) + -------------------------------------------------------------------------

Unknown / orphaned boards: diff --git a/MAKEALL b/MAKEALL index 03e8b7a..12bbbc5 100755 --- a/MAKEALL +++ b/MAKEALL @@ -587,6 +587,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_pandora \ omap3_zoom1 \ omap3_zoom2 \ + smdkc100 \ "

######################################################################### diff --git a/Makefile b/Makefile index 9d14210..36a94ca 100644 --- a/Makefile +++ b/Makefile @@ -3163,6 +3163,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 omap3 omap3

+smdkc100_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx + ######################################################################### ## XScale Systems ######################################################################### diff --git a/board/samsung/smdkc100/Makefile b/board/samsung/smdkc100/Makefile new file mode 100644 index 0000000..7d0b6b0 --- /dev/null +++ b/board/samsung/smdkc100/Makefile @@ -0,0 +1,54 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := smdkc100.o onenand.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(SOBJS) $(OBJS) + $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/smdkc100/config.mk b/board/samsung/smdkc100/config.mk new file mode 100644 index 0000000..ebab420 --- /dev/null +++ b/board/samsung/smdkc100/config.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2008 # Samsung Elecgtronics +# Kyungmin Park kyungmin.park@samsung.com +# + +# On S5PC100 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x38000000 to 0x40000000 (128MiB) +# +# On S5PC110 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x40000000 to 0x48000000 (128MiB) +# +TEXT_BASE = 0x34800000 diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S new file mode 100644 index 0000000..cd512bd --- /dev/null +++ b/board/samsung/smdkc100/lowlevel_init.S @@ -0,0 +1,221 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 2009 Samsung Electronics + * Kyungmin Park kyungmin.park@samsung.com + * Minkyu Kang mk7.kang@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/power.h> +#include <asm/arch/interrupt.h> + +/* + * Register usages: + * + * r5 has zero always + */ + +_TEXT_BASE: + .word TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + mov r9, lr + + /* r5 has always zero */ + mov r5, #0 + + ldr r8, =S5PC100_GPIO_BASE(0) + + /* Disable Watchdog */ + ldr r0, =S5PC100_WATCHDOG_BASE @0xEA200000 + orr r0, r0, #0x0 + str r5, [r0] + +#ifndef CONFIG_ONENAND_IPL + /* setting SRAM */ + ldr r0, =S5PC100_SROMC_BASE + ldr r1, =0x9 + str r1, [r0] +#endif + + /* S5PC100 has 3 groups of interrupt sources */ + ldr r0, =S5PC100_VIC0_BASE @0xE4000000 + ldr r1, =S5PC100_VIC1_BASE @0xE4000000 + ldr r2, =S5PC100_VIC2_BASE @0xE4000000 + + /* Disable all interrupts (VIC0, VIC1 and VIC2) */ + mvn r3, #0x0 + str r3, [r0, #VIC_INTENCLEAR_OFFSET] + str r3, [r1, #VIC_INTENCLEAR_OFFSET] + str r3, [r2, #VIC_INTENCLEAR_OFFSET] + +#ifndef CONFIG_ONENAND_IPL + /* Set all interrupts as IRQ */ + str r5, [r0, #VIC_INTSELECT_OFFSET] + str r5, [r1, #VIC_INTSELECT_OFFSET] + str r5, [r2, #VIC_INTSELECT_OFFSET] + + /* Pending Interrupt Clear */ + str r5, [r0, #VIC_INTADDRESS_OFFSET] + str r5, [r1, #VIC_INTADDRESS_OFFSET] + str r5, [r2, #VIC_INTADDRESS_OFFSET] +#endif + +#ifndef CONFIG_ONENAND_IPL + /* for UART */ + bl uart_asm_init + + /* for TZPC */ + bl tzpc_asm_init +#endif + +#ifdef CONFIG_ONENAND_IPL + /* init system clock */ + bl system_clock_init + + bl mem_ctrl_asm_init + + /* Wakeup support. Don't know if it's going to be used, untested. */ + ldr r0, =S5PC100_RST_STAT + ldr r1, [r0] + bic r1, r1, #0xfffffff7 + cmp r1, #0x8 + beq wakeup_reset +#endif + +1: + mov lr, r9 + mov pc, lr + +#ifdef CONFIG_ONENAND_IPL +wakeup_reset: + + /* Clear wakeup status register */ + ldr r0, =S5PC100_WAKEUP_STAT + ldr r1, [r0] + str r1, [r0] + + /* Load return address and jump to kernel */ + ldr r0, =S5PC100_INFORM0 + + /* r1 = physical address of s5pc100_cpu_resume function */ + ldr r1, [r0] + + /* Jump to kernel (sleep.S) */ + mov pc, r1 + nop + nop +#endif + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + ldr r8, =S5PC1XX_CLOCK_BASE @ 0xE0100000 + + /* Set Clock divider */ + ldr r1, =0x00011110 + str r1, [r8, #0x304] + ldr r1, =0x1 + str r1, [r8, #0x308] + ldr r1, =0x00011301 + str r1, [r8, #0x300] + + /* Set Lock Time */ + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r8, #0x000] @ APLL_LOCK + str r1, [r8, #0x004] @ MPLL_LOCK + str r1, [r8, #0x008] @ EPLL_LOCK + str r1, [r8, #0x00C] @ HPLL_LOCK + + /* APLL_CON */ + ldr r1, =0x81bc0400 @ SDIV 0, PDIV 4, MDIV 444 (1332MHz) + str r1, [r8, #0x100] + /* MPLL_CON */ + ldr r1, =0x80590201 @ SDIV 1, PDIV 2, MDIV 89 (267MHz) + str r1, [r8, #0x104] + /* EPLL_CON */ + ldr r1, =0x80870303 @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz) + str r1, [r8, #0x108] + /* HPLL_CON */ + ldr r1, =0x80600603 + str r1, [r8, #0x10C] + + /* Set Source Clock */ + ldr r1, =0x1111 @ A, M, E, HPLL Muxing + str r1, [r8, #0x200] @ CLK_SRC0 + + ldr r1, =0x1000001 @ Uart Clock & CLK48M Muxing + str r1, [r8, #0x204] @ CLK_SRC1 + + ldr r1, =0x9000 @ ARMCLK/4 + str r1, [r8, #0x400] @ CLK_OUT + + /* wait at least 200us to stablize all clock */ + mov r2, #0x10000 +1: subs r2, r2, #1 + bne 1b + + mov pc, lr + +#ifndef CONFIG_ONENAND_IPL +/* + * uart_asm_init: Initialize UART's pins + */ +uart_asm_init: + mov r0, r8 + ldr r1, =0x22222222 + str r1, [r0, #S5PC100_GPIO_A0_OFFSET] @ GPA0_CON + ldr r1, =0x00022222 + str r1, [r0, #S5PC100_GPIO_A1_OFFSET] @ GPA1_CON + + mov pc, lr + +/* + * tzpc_asm_init: Initialize TZPC + */ +tzpc_asm_init: + ldr r0, =0xE3800000 + mov r1, #0x0 + str r1, [r0] + mov r1, #0xff + str r1, [r0, #0x804] + str r1, [r0, #0x810] + + ldr r0, =0xE2800000 + str r1, [r0, #0x804] + str r1, [r0, #0x810] + str r1, [r0, #0x81C] + + ldr r0, =0xE2900000 + str r1, [r0, #0x804] + str r1, [r0, #0x810] + + mov pc, lr +#endif diff --git a/board/samsung/smdkc100/mem_setup.S b/board/samsung/smdkc100/mem_setup.S new file mode 100644 index 0000000..a3e692f --- /dev/null +++ b/board/samsung/smdkc100/mem_setup.S @@ -0,0 +1,198 @@ +/* + * Originates from Samsung's u-boot 1.1.6 port to S5PC1xx + * + * Copyright (C) 2009 Samsung Electrnoics + * Inki Dae inki.dae@samsung.com + * Heungjun Kim riverful.kim@samsung.com + * Minkyu Kang mk7.kang@samsung.com + * Kyungmin Park kyungmin.park@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/mem.h> + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + ldr r6, =S5PC100_DMC_BASE @ 0xE6000000 + + /* DLL parameter setting */ + ldr r1, =0x50101000 + str r1, [r6, #0x018] @ PHYCONTROL0 + ldr r1, =0xf4 + str r1, [r6, #0x01C] @ PHYCONTROL1 + ldr r1, =0x0 + str r1, [r6, #0x020] @ PHYCONTROL2 + + /* DLL on */ + ldr r1, =0x50101002 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* DLL start */ + ldr r1, =0x50101003 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* Force value locking for DLL off */ + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* DLL off */ + ldr r1, =0x50101001 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* auto refresh off */ + ldr r1, =0xff001010 + str r1, [r6, #0x000] @ CONCONTROL + + /* + * Burst Length 4, 2 chips, 32-bit, LPDDR + * OFF: dynamic self refresh, force precharge, dynamic power down off + */ + ldr r1, =0x00212100 + str r1, [r6, #0x004] @ MEMCONTROL + + /* + * Note: + * If Bank0 has OneDRAM we place it at 0x2800'0000 + * So finally Bank1 should address start at at 0x2000'0000 + */ + mov r4, #0x0 + +swap_memory: + /* + * Bank0 + * 0x30 -> 0x30000000 + * 0xf8 -> 0x37FFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r1, =0x30f80222 + /* if r4 is 1, swap the bank */ + cmp r4, #0x1 + orreq r1, r1, #0x08000000 + str r1, [r6, #0x008] @ MEMCONFIG0 + + /* + * Bank1 + * 0x38 -> 0x38000000 + * 0xf8 -> 0x3fFFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r1, =0x38f80222 + /* if r4 is 1, swap the bank */ + cmp r4, #0x1 + biceq r1, r1, #0x08000000 + str r1, [r6, #0x00c] @ MEMCONFIG1 + + ldr r1, =0x20000000 + str r1, [r6, #0x014] @ PRECHCONFIG + + /* + * FIXME: Please verify these values + * 7.8us * 166MHz %LE %LONG1294(0x50E) + * 7.8us * 133MHz %LE %LONG1038(0x40E), + * 7.8us * 100MHz %LE %LONG780(0x30C), + * 7.8us * 20MHz %LE %LONG156(0x9C), + * 7.8us * 10MHz %LE %LONG78(0x4E) + */ + ldr r1, =0x0000050e + str r1, [r6, #0x030] @ TIMINGAREF + + /* 166 MHz */ + ldr r1, =0x0c233287 + str r1, [r6, #0x034] @ TIMINGROW + + /* twtr=3 twr=2 trtp=3 cl=3 wl=3 rl=3 */ + ldr r1, =0x32330303 + str r1, [r6, #0x038] @ TIMINGDATA + + /* tfaw=4 sxsr=0x14 txp=0x14 tcke=3 tmrd=3 */ + ldr r1, =0x04141433 + str r1, [r6, #0x03C] @ TIMINGPOWER + + /* chip0 Deselect */ + ldr r1, =0x07000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 PALL */ + ldr r1, =0x01000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 REFA */ + ldr r1, =0x05000000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip0 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00000032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 Deselect */ + ldr r1, =0x07100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 PALL */ + ldr r1, =0x01100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 REFA */ + ldr r1, =0x05100000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip1 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00100032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* auto refresh on */ + ldr r1, =0xff002030 + str r1, [r6, #0x000] @ CONCONTROL + + /* PwrdnConfig */ + ldr r1, =0x00100002 + str r1, [r6, #0x028] @ PWRDNCONFIG + + /* BL%LE %LONG */ + ldr r1, =0xff212100 + str r1, [r6, #0x004] @ MEMCONTROL + + + /* Try to test memory area */ + cmp r4, #0x1 + beq 1f + + mov r4, #0x1 + ldr r1, =0x37ffff00 + str r4, [r1] + str r4, [r1, #0x4] @ dummy write + ldr r0, [r1] + cmp r0, r4 + bne swap_memory + +1: + mov pc, lr + + .ltorg diff --git a/board/samsung/smdkc100/onenand.c b/board/samsung/smdkc100/onenand.c new file mode 100644 index 0000000..75bb8a9 --- /dev/null +++ b/board/samsung/smdkc100/onenand.c @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Kyungmin Park kyungmin.park@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +#include <onenand_uboot.h> + +#include <samsung_onenand.h> + +#include <asm/io.h> +#include <asm/arch/clock.h> + +extern void s3c_onenand_init(struct mtd_info *); + +static inline int onenand_read_reg(int offset) +{ + return readl(CONFIG_SYS_ONENAND_BASE + offset); +} + +static inline void onenand_write_reg(int value, int offset) +{ + writel(value, CONFIG_SYS_ONENAND_BASE + offset); +} + +static int s5pc1xx_clock_read(int offset) +{ + return readl(S5PC1XX_CLOCK_BASE + offset); +} + +static void s5pc1xx_clock_write(int value, int offset) +{ + writel(value, S5PC1XX_CLOCK_BASE + offset); +} + +void onenand_board_init(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int value; + + this->base = (void *) S5PC100_ONENAND_BASE; + + /* D0 Domain memory clock gating */ + value = s5pc1xx_clock_read(S5P_CLK_GATE_D01_OFFSET); + value &= ~(1 << 2); /* CLK_ONENANDC */ + value |= (1 << 2); + s5pc1xx_clock_write(value, S5P_CLK_GATE_D01_OFFSET); + + value = s5pc1xx_clock_read(S5P_CLK_SRC0_OFFSET); + value &= ~(1 << 24); /* MUX_1nand: 0 from HCLKD0 */ + value &= ~(1 << 20); /* MUX_HREF: 0 from FIN_27M */ + s5pc1xx_clock_write(value, S5P_CLK_SRC0_OFFSET); + + value = s5pc1xx_clock_read(S5P_CLK_DIV1_OFFSET); + value &= ~(3 << 16); + value |= (1 << 16); + s5pc1xx_clock_write(value, S5P_CLK_DIV1_OFFSET); + + onenand_write_reg(ONENAND_MEM_RESET_COLD, MEM_RESET_OFFSET); + + while (!(onenand_read_reg(INT_ERR_STAT_OFFSET) & RST_CMP)) + continue; + + onenand_write_reg(RST_CMP, INT_ERR_ACK_OFFSET); + + onenand_write_reg(0x3, ACC_CLOCK_OFFSET); + + onenand_write_reg(0x3fff, INT_ERR_MASK_OFFSET); + onenand_write_reg(1 << 0, INT_PIN_ENABLE_OFFSET); /* Enable */ + + value = onenand_read_reg(INT_ERR_MASK_OFFSET); + value &= ~RDY_ACT; + onenand_write_reg(value, INT_ERR_MASK_OFFSET); + + s3c_onenand_init(mtd); +} diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c new file mode 100644 index 0000000..4539ced --- /dev/null +++ b/board/samsung/smdkc100/smdkc100.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Minkyu Kang mk7.kang@samsung.com + * Kyungmin Park kyungmin.park@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); + + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("Board:\tSMDKC100\n"); + return 0; +} +#endif diff --git a/board/samsung/smdkc100/u-boot.lds b/board/samsung/smdkc100/u-boot.lds new file mode 100644 index 0000000..27f8201 --- /dev/null +++ b/board/samsung/smdkc100/u-boot.lds @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, gj@denx.de + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm_cortexa8/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } + __exidx_start = .; + .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } + __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h new file mode 100644 index 0000000..ec0fd1d --- /dev/null +++ b/include/configs/smdkc100.h @@ -0,0 +1,240 @@ +/* + * (C) Copyright 2009 Samsung Electronics + * Minkyu Kang mk7.kang@samsung.com + * HeungJun Kim riverful.kim@samsung.com + * Inki Dae inki.dae@samsung.com + * + * Configuation settings for the SAMSUNG SMDKC100 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ +#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */ +#define CONFIG_S5PC100 1 /* which is in a S5PC100 */ +#define CONFIG_SMDKC100 1 /* working with SMDKC100 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT + +/* + * Architecture magic and machine type + */ +#define MACH_TYPE 1826 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* input clock of PLL: SMDKC100 has 12MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 12000000 + +/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x30000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* + * Size of malloc() pool + * 1MB = 0x100000, 0x100000 = 1024 * 1024 + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */ + /* initial data */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL0 1 /* we use SERIAL 0 on SMDKC100 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 + +/*********************************************************** + * Command definition + ***********************************************************/ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_BOOTD +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_XIMG +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_NET +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_ONENAND +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#define MTDIDS_DEFAULT "onenand0=s3c-onenand" +#define MTDPARTS_DEFAULT "mtdparts=s3c-onenand:256k(bootloader)"\ + ",128k@0x40000(params)"\ + ",3m@0x60000(kernel)"\ + ",16m@0x360000(test)"\ + ",-(UBI)" + +#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT + +#if 1 +#define CONFIG_BOOTCOMMAND "run ubifsboot" +#else +#define CONFIG_BOOTCOMMAND "bootm 0x31008000" +#endif + +#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ + " console=ttySAC0,115200n8" \ + " mem=80M" + +#define CONFIG_COMMON_BOOT "console=ttySAC0,115200n8" \ + " mem=128M " \ + " " MTDPARTS_DEFAULT + +#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ubi.mtd=4" \ + " rootfstype=cramfs " CONFIG_COMMON_BOOT + +#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \ + " onenand write 0x32008000 0x0 0x40000\0" + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_UPDATEB \ + "updatek=onenand erase 0x60000 0x300000;" \ + " onenand write 0x31008000 0x60000 0x300000\0" \ + "updateu=onenand erase block 147-4095;" \ + " onenand write 0x32000000 0x1260000 0x8C0000\0" \ + "bootk=onenand read 0x30007FC0 0x60000 0x300000;" \ + " bootm 0x30007FC0\0" \ + "flashboot=set bootargs root=/dev/mtdblock${bootblock}" \ + " rootfstype=${rootfstype}" \ + " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; run bootk\0" \ + "ubifsboot=set bootargs root=ubi0!rootfs rootfstype=ubifs" \ + " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; run bootk\0" \ + "boottrace=setenv opts initcall_debug; run bootcmd\0" \ + "android=set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock}" \ + " rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; run bootk\0" \ + "nfsboot=set bootargs root=/dev/nfs ubi.mtd=${ubiblock}" \ + " nfsroot=${nfsroot},nolock ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; run bootk\0" \ + "ramboot=set bootargs " CONFIG_RAMDISK_BOOT \ + " initrd=0x33000000,8M ramdisk=8192\0" \ + "rootfstype=cramfs\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "meminfo=mem=128M\0" \ + "nfsroot=/nfsroot/arm\0" \ + "bootblock=5\0" \ + "ubiblock=4\0" \ + "ubi=enabled" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "SMDKC100 # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000) +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + +#define CONFIG_SYS_HZ 2085900 /* at PCLK 66.75MHz */ + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_256K /* regular stack */ + +/* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE SZ_128M /* 0x8000000, 128 MB Bank #1 */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH 1 + +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define CONFIG_IDENT_STRING " for SMDKC100" + +#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000) +#define CONFIG_ENABLE_MMU +#endif + +#ifdef CONFIG_ENABLE_MMU +#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 +#else +#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE +#endif + +/*----------------------------------------------------------------------- + * Boot configuration (define only one of next 3) + */ +#define CONFIG_ENV_IS_IN_ONENAND 1 +#define CONFIG_ENV_SIZE SZ_128K /* 128KB, 0x20000 */ +#define CONFIG_ENV_ADDR SZ_256K /* 256KB, 0x40000 */ +#define CONFIG_ENV_OFFSET SZ_256K /* 256KB, 0x40000 */ + +#define CONFIG_USE_ONENAND_BOARD_INIT +#define CONFIG_SYS_ONENAND_BASE 0xE7100000 + +#define CONFIG_DOS_PARTITION 1 + +#endif /* __CONFIG_H */