There is no reason to bind psci driver if U-Boot runs in EL3 because SMC/HVC instructions can't be called. That's why detect this state and don't let user to crash from prompt by performing reset or poweroff commands (if enabled).

Signed-off-by: Michal Simek michal.simek@xilinx.com ---

Changes in v2: - Add missing asm/system.h header

Maybe there is a better way how to do it. Maybe do it in probe instead of bind. Feel free to comment but this doesn't look right behavior.

Before:

U-Boot SPL 2020.10-rc2-00032-gede802a09435 (Aug 12 2020 - 09:17:01 +0200) PMUFW: v1.1 Loading new PMUFW cfg obj (2024 bytes) EL Level: EL3 Multiboot: 0 Trying to boot from MMC2 spl: could not initialize mmc. error: -19 Trying to boot from MMC1 spl_load_image_fat_os: error reading image u-boot.bin, err - -2

U-Boot 2020.10-rc2-00032-gede802a09435 (Aug 12 2020 - 09:17:01 +0200)

Model: ZynqMP ZCU104 RevC Board: Xilinx ZynqMP DRAM: 2 GiB PMUFW: v1.1 EL Level: EL3 Chip ID: zu7e Multiboot: 0 WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: mmc@ff170000: 0 In: serial@ff000000 Out: serial@ff000000 Err: serial@ff000000 Bootmode: LVL_SHFT_SD_MODE1 Reset reason: EXTERNAL Net: ZYNQ GEM: ff0e0000, mdio bus ff0e0000, phyaddr 12, interface rgmii-id eth0: ethernet@ff0e0000 Hit any key to stop autoboot: 0 ZynqMP> reset resetting ... "Synchronous Abort" handler, esr 0x5e000000 elr: 0000000008000194 lr : 0000000008000220 (reloc) elr: 000000007fec9194 lr : 000000007fec9220 x0 : 0000000084000009 x1 : 0000000000000000 x2 : 0000000000000000 x3 : 0000000000000000 x4 : 0000000000000000 x5 : 0000000000000000 x6 : 0000000000000000 x7 : 0000000000000000 x8 : 000000007deaedb0 x9 : 000000000000000c x10: 00000000000007c4 x11: 000000007deae92c x12: 0000000000000006 x13: 000000000001869f x14: 000000007deaedb0 x15: 0000000000000002 x16: 000000007ff2b20c x17: 0000000000000000 x18: 000000007deb8db0 x19: 0000000000000000 x20: 000000007ffb0ae0 x21: 0000000000000000 x22: 000000007debc600 x23: 0000000000000001 x24: 000000007ffc8158 x25: 0000000000000000 x26: 0000000000000000 x27: 0000000000000000 x28: 000000007debc640 x29: 000000007deaeaf0

Code: 00000000 f9020000 00000000 d4000003 (f94003e4) Resetting CPU ...

### ERROR ### Please RESET the board ###

After:

U-Boot SPL 2020.10-rc2-00033-g952b21dcb4b3 (Aug 12 2020 - 09:18:56 +0200) PMUFW: v1.1 Loading new PMUFW cfg obj (2024 bytes) EL Level: EL3 Multiboot: 0 Trying to boot from MMC2 spl: could not initialize mmc. error: -19 Trying to boot from MMC1 spl_load_image_fat_os: error reading image u-boot.bin, err - -2

U-Boot 2020.10-rc2-00033-g952b21dcb4b3 (Aug 12 2020 - 09:18:56 +0200)

Model: ZynqMP ZCU104 RevC Board: Xilinx ZynqMP DRAM: 2 GiB PMUFW: v1.1 EL Level: EL3 Chip ID: zu7e Multiboot: 0 WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: mmc@ff170000: 0 In: serial@ff000000 Out: serial@ff000000 Err: serial@ff000000 Bootmode: LVL_SHFT_SD_MODE1 Reset reason: EXTERNAL Net: ZYNQ GEM: ff0e0000, mdio bus ff0e0000, phyaddr 12, interface rgmii-id eth0: ethernet@ff0e0000 Hit any key to stop autoboot: 0 ZynqMP> ZynqMP> reset resetting ... ZynqMP>

--- drivers/firmware/psci.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c index 7d2e49fd3e3b..e6425e8ffcf4 100644 --- a/drivers/firmware/psci.c +++ b/drivers/firmware/psci.c @@ -19,6 +19,7 @@ #include <linux/errno.h> #include <linux/printk.h> #include <linux/psci.h> +#include <asm/system.h>

#define DRIVER_NAME "psci"

@@ -73,6 +74,9 @@ static int psci_probe(struct udevice *dev) { const char *method;

+ if (current_el() == 3) + return -EINVAL; + method = ofnode_read_string(dev_ofnode(dev), "method"); if (!method) { pr_warn("missing "method" property\n");