Wolfgang,

Here is a patch for the MPC8540/8560ADS and STXGP3 boards that is primarily to support larger DDR memories up to 2G.

This patch applies with a -p2, and was tested on MPC8540ADS, MPC8560ADS, and compiles on STXGP3 and SBC8560.

As usual, please let me know of any corrections needed here.

Thanks, jdl

* Patch by Jon Loeliger, 16-Jul-2004: Fixes for the MPC8540ADS, MPC8560ADS, and stxgp3 boards: * Includes Dan Malek's mods of my mods for large DDR on STXGP3 * Updated OR3 to only use 1M, not 16M, for CADMUS. Thanks York! * Made MPC8540/8560ADS be 33Mhz PCI by default. * Incorporated Tom Armistead's spd_sdram patches for picosecond resolution, banksize calculations, and dynamic DDR sizing. * Better TLB and LAWBAR size determination. * Reworked the TLB setup to support up to 2G DDR. * DDR setup without SPD_EEPROM is not fully supported. * Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16 and CONFIG_L2_INIT_RAM options. * Refactor Local Bus initialization out of SDRAM setup. * Re-implement new version of LBC11/DDR11 errata workarounds. * Moved board specific PCI init parts out of CPU directory. * Added TLB entry for PCI-1 IO Memory * Updated README.mpc85xxads