[U-Boot] [PATCH v3 1/4] usb: mxs: Disable USB Port 1 for i.MX23
The i.MX23 just one USB port so disable the second controller probe when building for i.MX23.
Signed-off-by: Otavio Salvador otavio@ossystems.com.br --- Changes in v3: None Changes in v2: None
drivers/usb/host/ehci-mxs.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c index 5062af5..28c8cde 100644 --- a/drivers/usb/host/ehci-mxs.c +++ b/drivers/usb/host/ehci-mxs.c @@ -50,10 +50,12 @@ int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port) usb_base = MXS_USBCTRL0_BASE; phy_base = MXS_USBPHY0_BASE; break; +#ifdef CONFIG_MX28 case 1: usb_base = MXS_USBCTRL1_BASE; phy_base = MXS_USBPHY1_BASE; break; +#endif default: printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port); return -1;
This enabled USB support for the mx23evk board.
Signed-off-by: Otavio Salvador otavio@ossystems.com.br --- Changes in v3: - Add a obvious commitlog;
Changes in v2: None
include/configs/mx23evk.h | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index d206c95..99dfb8f 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -58,6 +58,7 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_GPIO #define CONFIG_CMD_MMC +#define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ
/* Memory configurations */ @@ -122,6 +123,15 @@ #define CONFIG_MXS_MMC #endif
+/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT 0 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + /* Boot Linux */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS
This enabled USB support for the mx23_olinuxino board.
Signed-off-by: Otavio Salvador otavio@ossystems.com.br --- Changes in v3: - Add a obvious commitlog;
Changes in v2: None
include/configs/mx23_olinuxino.h | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index d019944..e081c49 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -60,6 +60,7 @@ #define CONFIG_CMD_GPIO #define CONFIG_CMD_LED #define CONFIG_CMD_MMC +#define CONFIG_CMD_USB
/* * Memory configurations @@ -140,6 +141,15 @@ */ #define CONFIG_APBH_DMA
+/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT 0 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + /* * Boot Linux */
This adds support to the LAN9512 chip included in the board and extend the environment to easy netboot use.
Signed-off-by: Otavio Salvador otavio@ossystems.com.br --- Changes in v3: - Remove useless newlines - Add NOPULL in MUX setup - Fix commitlog to say the right chip number - Use CONFIG_CMD_USB to disable GPIO setting
Changes in v2: - Move GPIO initialization to board_early_init_f; - Extend commitlog;
board/olimex/mx23_olinuxino/mx23_olinuxino.c | 5 ++++ board/olimex/mx23_olinuxino/spl_boot.c | 4 +++ include/configs/mx23_olinuxino.h | 40 +++++++++++++++++++++++++--- 3 files changed, 46 insertions(+), 3 deletions(-)
diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index 2501417..9252717 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -45,6 +45,11 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+#ifdef CONFIG_CMD_USB + /* Enable LAN9512 */ + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); +#endif + return 0; }
diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c index 3bbf5ad..a96c293 100644 --- a/board/olimex/mx23_olinuxino/spl_boot.c +++ b/board/olimex/mx23_olinuxino/spl_boot.c @@ -95,6 +95,10 @@ const iomux_cfg_t iomux_setup[] = { MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP, MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP, MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP, + + /* Ethernet */ + MX23_PAD_GPMI_ALE__GPIO_0_17 | + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), };
void board_init_ll(void) diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index e081c49..2c81fb6 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -55,11 +55,13 @@ #define CONFIG_DOS_PARTITION
#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_GPIO #define CONFIG_CMD_LED #define CONFIG_CMD_MMC +#define CONFIG_CMD_NET #define CONFIG_CMD_USB
/* @@ -150,6 +152,12 @@ #define CONFIG_USB_STORAGE #endif
+/* Ethernet */ +#ifdef CONFIG_CMD_NET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#endif + /* * Boot Linux */ @@ -175,6 +183,7 @@ /* * Extra Environments */ + #define CONFIG_EXTRA_ENV_SETTINGS \ "update_sd_firmware_filename=u-boot.sd\0" \ "update_sd_firmware=" /* Update the SD firmware partition */ \ @@ -191,6 +200,7 @@ "fdt_file=imx23-olinuxino.dtb\0" \ "fdt_addr=0x41000000\0" \ "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ @@ -216,6 +226,31 @@ "fi; " \ "else " \ "bootm; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console_mainline},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "usb start; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi;" \ + "fi; " \ + "else " \ + "bootm; " \ "fi;\0"
#define CONFIG_BOOTCOMMAND \ @@ -225,10 +260,9 @@ "else " \ "if run loaduimage; then " \ "run mmcboot; " \ - "else " \ - "echo ERR: Fail to boot from MMC; " \ + "else run netboot; " \ "fi; " \ "fi; " \ - "else exit; fi" + "else run netboot; fi"
#endif /* __MX23_OLINUXINO_CONFIG_H__ */
participants (1)
-
Otavio Salvador