Hello Team,

I hope this email finds you well. I'm currently facing an issue with enabling the CONFIG_Netconsole flag under the bootloader. Despite CONFIG_NETCONSOLE being already enabled in the build system, I'm encountering difficulties in getting it to work.

Here's what I've tried so far:

1. Enabled CONFIG_NETCONSOLE in the build system. 2. Set the environment variables as follows: * |setenv nc 'setenv stdout nc;setenv stdin nc'| * |setenv ncip 192.168.1.1| 3. Saved the environment using |saveenv|. 4. Executed |run ncc|.

However, I encountered the following errors:

|## Error inserting "stdout" variable, errno=22 ## Error inserting "stdin" variable, errno=22 |

Upon checking the environment variables using |printenv|, I see that the |stdout|, |stdin|, and |stderr| variables are set to |serial@ff812000|. Here's the relevant part of the environment:

|tderr=serial@ff812000 stdin=serial@ff812000 stdout=serial@ff812000 |

I'm seeking your assistance in resolving this issue. Any guidance or solutions would be greatly appreciated.

Thank you for your attention to this matter.

Best regards, Ahmed

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

=> setenv nc 'setenv stdout nc;setenv stdin nc' => setenv ncip 192.168.1.1 => saveenv Saving Environment to NVRAM... OK => run ncc ## Error inserting "stdout" variable, errno=22 ## Error inserting "stdin" variable, errno=22

=> printenv arch=arm baudrate=115200 board=v14 board_name=v14

bootcmd=secure_boot bootcount=1 bootdelay=2 bootlimit=3 cpu=armv8 env_boot_magic=8192

fdtcontroladdr=6fcdffa0 initrd_high=0xffffffffffffffff loadaddr=0x1000000 ncc=setenv stdout ncc;setenv stdin ncc nccip=192.168.1.1 nummacaddrs=10 rootfs_opts=root= rdinit=/sbin/init silent=yes soc=bcm4912 stderr=serial@ff812000 stdin=serial@ff812000 stdout=serial@ff812000 u-boot-mode=nominal uboot-prestage-version=U-Boot TPL 2019.07 (Feb 16 2023 - 15:59:27 +0800) vendor=arcadyan

Environment size: 597/16380 bytes

=> version U-Boot 2022.07 (Jun 15 2023 - 20:18:39 +0000)

aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot bcm9xxx-linux-4.19-gcc-10.3-glibc-2.32_v1.0.0) 10.3.0 GNU ld (GNU Binutils) 2.36.1