[U-Boot] [U-boot] Marvell Pull Request
Hi Wolfgang
Please pull
The following changes since commit 3b6a9267f0de7b85d387fa4123d0b58379363447: Wolfgang Denk (1): board/flagadm/flash.c: fix compile warning
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git master
Prafulla Wadaskar (2): Kirkwood: rd6281a: Add kwbimage build support Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
Simon Kagstrom (1): Support for the OpenRD base board
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/Marvell/mv88f6281gtw_ge/config.mk | 3 + board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165 +++++++++++++++++++++ board/Marvell/openrd_base/Makefile | 56 +++++++ board/Marvell/openrd_base/config.mk | 33 ++++ board/Marvell/openrd_base/kwbimage.cfg | 168 +++++++++++++++++++++ board/Marvell/openrd_base/openrd_base.c | 160 ++++++++++++++++++++ board/Marvell/openrd_base/openrd_base.h | 46 ++++++ board/Marvell/rd6281a/config.mk | 3 + board/Marvell/rd6281a/kwbimage.cfg | 167 +++++++++++++++++++++ include/configs/openrd_base.h | 220 ++++++++++++++++++++++++++++ 13 files changed, 1029 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/Makefile create mode 100644 board/Marvell/openrd_base/config.mk create mode 100644 board/Marvell/openrd_base/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/openrd_base.c create mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 board/Marvell/rd6281a/kwbimage.cfg create mode 100644 include/configs/openrd_base.h
Regards.. Prafulla . . .
Prafulla Wadaskar wrote:
Hi Wolfgang
Please pull
Shouldn't this rather get pulled to u-boot-arm? Tom
The following changes since commit 3b6a9267f0de7b85d387fa4123d0b58379363447: Wolfgang Denk (1): board/flagadm/flash.c: fix compile warning
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git master
Prafulla Wadaskar (2): Kirkwood: rd6281a: Add kwbimage build support Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
Simon Kagstrom (1): Support for the OpenRD base board
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/Marvell/mv88f6281gtw_ge/config.mk | 3 + board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165 +++++++++++++++++++++ board/Marvell/openrd_base/Makefile | 56 +++++++ board/Marvell/openrd_base/config.mk | 33 ++++ board/Marvell/openrd_base/kwbimage.cfg | 168 +++++++++++++++++++++ board/Marvell/openrd_base/openrd_base.c | 160 ++++++++++++++++++++ board/Marvell/openrd_base/openrd_base.h | 46 ++++++ board/Marvell/rd6281a/config.mk | 3 + board/Marvell/rd6281a/kwbimage.cfg | 167 +++++++++++++++++++++ include/configs/openrd_base.h | 220 ++++++++++++++++++++++++++++ 13 files changed, 1029 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/Makefile create mode 100644 board/Marvell/openrd_base/config.mk create mode 100644 board/Marvell/openrd_base/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/openrd_base.c create mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 board/Marvell/rd6281a/kwbimage.cfg create mode 100644 include/configs/openrd_base.h
Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-----Original Message----- From: Tom [mailto:Tom.Rix@windriver.com] Sent: Tuesday, September 22, 2009 12:46 AM To: Prafulla Wadaskar Cc: U-Boot Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
Prafulla Wadaskar wrote:
Hi Wolfgang
Please pull
Shouldn't this rather get pulled to u-boot-arm? Tom
Hi Tom, Yes :-) you are right. I was bit biased since u-boot-marvell.git was cloned from u-boot.git Shall I generate new email pull request? Or Can you please kindly pull it to u-boot-arm?
Regards.. Prafulla . .
The following changes since commit
3b6a9267f0de7b85d387fa4123d0b58379363447:
Wolfgang Denk (1): board/flagadm/flash.c: fix compile warning
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git master
Prafulla Wadaskar (2): Kirkwood: rd6281a: Add kwbimage build support Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
Simon Kagstrom (1): Support for the OpenRD base board
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/Marvell/mv88f6281gtw_ge/config.mk | 3 + board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165
+++++++++++++++++++++
board/Marvell/openrd_base/Makefile | 56 +++++++ board/Marvell/openrd_base/config.mk | 33 ++++ board/Marvell/openrd_base/kwbimage.cfg | 168
+++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.c | 160
++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.h | 46 ++++++ board/Marvell/rd6281a/config.mk | 3 + board/Marvell/rd6281a/kwbimage.cfg | 167
+++++++++++++++++++++
include/configs/openrd_base.h | 220
++++++++++++++++++++++++++++
13 files changed, 1029 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/Makefile create mode 100644 board/Marvell/openrd_base/config.mk create mode 100644 board/Marvell/openrd_base/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/openrd_base.c create mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 board/Marvell/rd6281a/kwbimage.cfg create mode 100644 include/configs/openrd_base.h
Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Prafulla Wadaskar wrote:
-----Original Message----- From: Tom [mailto:Tom.Rix@windriver.com] Sent: Tuesday, September 22, 2009 12:46 AM To: Prafulla Wadaskar Cc: U-Boot Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
Prafulla Wadaskar wrote:
Hi Wolfgang
Please pull
Shouldn't this rather get pulled to u-boot-arm? Tom
Hi Tom, Yes :-) you are right. I was bit biased since u-boot-marvell.git was cloned from u-boot.git Shall I generate new email pull request? Or Can you please kindly pull it to u-boot-arm?
I would like to set up a process where I just cherry picked your changes directly from marvell/master.
Comparing marvell/master to arm/next
git cherry t-next + ceb2d57c2205db5bbd868577f756c74a2568160c + 95a4a593b577b6e2f1da2d4b0f5ec86975c33413 + 84a45d33c2cc261dbd5411f7c2ad45f6003025b6 + e67af44d0167d8237dd2c2ddf8e301d19ca12914 + 0413cfecea350000eab5e591a0965c3e3ee0ff00 + 3b6a9267f0de7b85d387fa4123d0b58379363447 + ffed6c85ce591cd93e28190153fec421c3b2499c <- pick me + c928c19b2563e4977adc0570d06c900ac1e7788c <- pick me + 9ef0569a3c8b0d2458bdbce21a5370807e13e20a <- pick me
The others look like they came from u-boot/master
It would be helpful but not required if you merged against arm/master or arm/next instead of u-boot/master.
If I can assume what is good in marvell/master, we do not need for you go through the asking for a pulls, they will just happen when I have time, likely over the weekend.
These changes will accumulate in arm/next. Less frequently I will merge these to arm/master. This will happen once you and the other arm maintainers have given then the ok. I was thinking that this could happen monthly but I am open for other suggestions.
Tom
Regards.. Prafulla . .
The following changes since commit
3b6a9267f0de7b85d387fa4123d0b58379363447:
Wolfgang Denk (1): board/flagadm/flash.c: fix compile warning
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git master
Prafulla Wadaskar (2): Kirkwood: rd6281a: Add kwbimage build support Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
Simon Kagstrom (1): Support for the OpenRD base board
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/Marvell/mv88f6281gtw_ge/config.mk | 3 + board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165
+++++++++++++++++++++
board/Marvell/openrd_base/Makefile | 56 +++++++ board/Marvell/openrd_base/config.mk | 33 ++++ board/Marvell/openrd_base/kwbimage.cfg | 168
+++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.c | 160
++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.h | 46 ++++++ board/Marvell/rd6281a/config.mk | 3 + board/Marvell/rd6281a/kwbimage.cfg | 167
+++++++++++++++++++++
include/configs/openrd_base.h | 220
++++++++++++++++++++++++++++
13 files changed, 1029 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/Makefile create mode 100644 board/Marvell/openrd_base/config.mk create mode 100644 board/Marvell/openrd_base/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/openrd_base.c create mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 board/Marvell/rd6281a/kwbimage.cfg create mode 100644 include/configs/openrd_base.h
Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-----Original Message----- From: Tom [mailto:Tom.Rix@windriver.com] Sent: Tuesday, September 22, 2009 6:50 PM To: Prafulla Wadaskar Cc: U-Boot; Paulraj, Sandeep; Minkyu Kang; Wolfgang Denk Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
Prafulla Wadaskar wrote:
-----Original Message----- From: Tom [mailto:Tom.Rix@windriver.com] Sent: Tuesday, September 22, 2009 12:46 AM To: Prafulla Wadaskar Cc: U-Boot Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
Prafulla Wadaskar wrote:
Hi Wolfgang
Please pull
Shouldn't this rather get pulled to u-boot-arm? Tom
Hi Tom, Yes :-) you are right. I was bit biased since u-boot-marvell.git was cloned from u-boot.git Shall I generate new email pull request? Or Can you please kindly pull it to u-boot-arm?
I would like to set up a process where I just cherry picked your changes directly from marvell/master.
Comparing marvell/master to arm/next
git cherry t-next
- ceb2d57c2205db5bbd868577f756c74a2568160c
- 95a4a593b577b6e2f1da2d4b0f5ec86975c33413
- 84a45d33c2cc261dbd5411f7c2ad45f6003025b6
- e67af44d0167d8237dd2c2ddf8e301d19ca12914
- 0413cfecea350000eab5e591a0965c3e3ee0ff00
- 3b6a9267f0de7b85d387fa4123d0b58379363447
- ffed6c85ce591cd93e28190153fec421c3b2499c <- pick me
- c928c19b2563e4977adc0570d06c900ac1e7788c <- pick me
- 9ef0569a3c8b0d2458bdbce21a5370807e13e20a <- pick me
The others look like they came from u-boot/master
It would be helpful but not required if you merged against arm/master or arm/next instead of u-boot/master.
I think this makes more sense to merge it from arm/master, I will do that, I am thinking of creating a branch "arm" instead of disturbing master, what do you think?
If I can assume what is good in marvell/master, we do not need for you go through the asking for a pulls, they will just happen when I have time, likely over the weekend.
If I have clean changes in lined with arm/master, then why not to pull?
These changes will accumulate in arm/next.
If this is clear from you that Changes will be accumulated in arm/next then I must rebase a branch on u-boot-marvell.git with arm/next.
Less frequently I will merge these to arm/master. This will happen once you and the other arm maintainers have given then the ok. I was thinking that this could happen monthly but I am open for other suggestions.
I think monthly will be too long, may be wolfgang can comment better on this :-)
Regards.. Prafulla . .
Tom
Regards.. Prafulla . .
The following changes since commit
3b6a9267f0de7b85d387fa4123d0b58379363447:
Wolfgang Denk (1): board/flagadm/flash.c: fix compile warning
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git master
Prafulla Wadaskar (2): Kirkwood: rd6281a: Add kwbimage build support Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
Simon Kagstrom (1): Support for the OpenRD base board
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/Marvell/mv88f6281gtw_ge/config.mk | 3 + board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165
+++++++++++++++++++++
board/Marvell/openrd_base/Makefile | 56 +++++++ board/Marvell/openrd_base/config.mk | 33 ++++ board/Marvell/openrd_base/kwbimage.cfg | 168
+++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.c | 160
++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.h | 46 ++++++ board/Marvell/rd6281a/config.mk | 3 + board/Marvell/rd6281a/kwbimage.cfg | 167
+++++++++++++++++++++
include/configs/openrd_base.h | 220
++++++++++++++++++++++++++++
13 files changed, 1029 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/Makefile create mode 100644 board/Marvell/openrd_base/config.mk create mode 100644 board/Marvell/openrd_base/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/openrd_base.c create mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 board/Marvell/rd6281a/kwbimage.cfg create mode 100644 include/configs/openrd_base.h
Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Prafulla Wadaskar wrote:
-----Original Message----- From: Tom [mailto:Tom.Rix@windriver.com] Sent: Tuesday, September 22, 2009 6:50 PM To: Prafulla Wadaskar Cc: U-Boot; Paulraj, Sandeep; Minkyu Kang; Wolfgang Denk Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
Prafulla Wadaskar wrote:
-----Original Message----- From: Tom [mailto:Tom.Rix@windriver.com] Sent: Tuesday, September 22, 2009 12:46 AM To: Prafulla Wadaskar Cc: U-Boot Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
Prafulla Wadaskar wrote:
Hi Wolfgang
Please pull
Shouldn't this rather get pulled to u-boot-arm? Tom
Hi Tom, Yes :-) you are right. I was bit biased since u-boot-marvell.git was cloned from u-boot.git Shall I generate new email pull request? Or Can you please kindly pull it to u-boot-arm?
I would like to set up a process where I just cherry picked your changes directly from marvell/master.
Comparing marvell/master to arm/next
git cherry t-next
- ceb2d57c2205db5bbd868577f756c74a2568160c
- 95a4a593b577b6e2f1da2d4b0f5ec86975c33413
- 84a45d33c2cc261dbd5411f7c2ad45f6003025b6
- e67af44d0167d8237dd2c2ddf8e301d19ca12914
- 0413cfecea350000eab5e591a0965c3e3ee0ff00
- 3b6a9267f0de7b85d387fa4123d0b58379363447
- ffed6c85ce591cd93e28190153fec421c3b2499c <- pick me
- c928c19b2563e4977adc0570d06c900ac1e7788c <- pick me
- 9ef0569a3c8b0d2458bdbce21a5370807e13e20a <- pick me
The others look like they came from u-boot/master
It would be helpful but not required if you merged against arm/master or arm/next instead of u-boot/master.
I think this makes more sense to merge it from arm/master, I will do that, I am thinking of creating a branch "arm" instead of disturbing master, what do you think?
I think keeping the branches simple 'master', 'next' and optionally 'testing' is better.
Locally you can do whatever you want. I make a compound mirror of u-boot, arm and all the vendor arms to help me navigate the cherry picking.
If I can assume what is good in marvell/master, we do not need for you go through the asking for a pulls, they will just happen when I have time, likely over the weekend.
If I have clean changes in lined with arm/master, then why not to pull?
Yes that would be ideal. I like to look over the changes before I merge them in so it is not going to be that automatic.
These changes will accumulate in arm/next.
If this is clear from you that Changes will be accumulated in arm/next then I must rebase a branch on u-boot-marvell.git with arm/next.
Less frequently I will merge these to arm/master. This will happen once you and the other arm maintainers have given then the ok. I was thinking that this could happen monthly but I am open for other suggestions.
I think monthly will be too long, may be wolfgang can comment better on this :-)
Yup
Tom
Dear Tom,
In message 4AB8CF0B.5070404@windriver.com you wrote:
I would like to set up a process where I just cherry picked your changes directly from marvell/master.
Please pull in the normal case, don't cherry-pick unless really necessary.
If I can assume what is good in marvell/master, we do not need for you go through the asking for a pulls, they will just happen when I have time, likely over the weekend.
No, please don't automatize this.
Prafulla, please continue to send pullr equests to Tom, as this is important information for me, too.
Best regards,
Wolfgang Denk
Wolfgang Denk wrote:
Dear Tom,
In message 4AB8CF0B.5070404@windriver.com you wrote:
I would like to set up a process where I just cherry picked your changes directly from marvell/master.
Please pull in the normal case, don't cherry-pick unless really necessary.
If I can assume what is good in marvell/master, we do not need for you go through the asking for a pulls, they will just happen when I have time, likely over the weekend.
No, please don't automatize this.
Prafulla, please continue to send pullr equests to Tom, as this is important information for me, too.
Ok.
What do you think about the frequency of arm/master monthly updates?
Tom
Best regards,
Wolfgang Denk
Dear Tom,
In message 4ABAC668.3040907@windriver.com you wrote:
What do you think about the frequency of arm/master monthly updates?
Monthly seems to be extremely long. Looking at current activity for ARM systems, I would expeect to see 2...3 (or more) PRs while the merge window is open, and about the same during the stabilization phase. Also, I guess a fixed period is not optimal; doing this as needed is probably more appropriate.
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de A list is only as strong as its weakest link. -- Don Knuth
Wolfgang Denk wrote:
Dear Tom,
In message 4ABAC668.3040907@windriver.com you wrote:
What do you think about the frequency of arm/master monthly updates?
Monthly seems to be extremely long. Looking at current activity for ARM systems, I would expeect to see 2...3 (or more) PRs while the merge window is open, and about the same during the stabilization phase. Also, I guess a fixed period is not optimal; doing this as needed is probably more appropriate.
Ok.
Tom
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de A list is only as strong as its weakest link. -- Don Knuth
Prafulla Wadaskar wrote:
-----Original Message----- From: Tom [mailto:Tom.Rix@windriver.com] Sent: Tuesday, September 22, 2009 12:46 AM To: Prafulla Wadaskar Cc: U-Boot Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
Prafulla Wadaskar wrote:
Hi Wolfgang
Please pull
Shouldn't this rather get pulled to u-boot-arm? Tom
Hi Tom, Yes :-) you are right. I was bit biased since u-boot-marvell.git was cloned from u-boot.git Shall I generate new email pull request? Or Can you please kindly pull it to u-boot-arm?
Regards.. Prafulla . .
Prafulla,
The commits have been pulled to arm/next.
openrd_base had this ERR in MAKEALL arm
kirkwood_egiga.c: In function 'kwgbe_init': kirkwood_egiga.c:445: warning: dereferencing type-punned pointer will break strict-aliasing rules kirkwood_egiga.c: In function 'kwgbe_recv': kirkwood_egiga.c:606: warning: dereferencing type-punned pointer will break strict-aliasing rules
Please verify the commits have made it into arm/next and help resolve the error in openrd_base.
Tom
The following changes since commit
3b6a9267f0de7b85d387fa4123d0b58379363447:
Wolfgang Denk (1): board/flagadm/flash.c: fix compile warning
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git master
Prafulla Wadaskar (2): Kirkwood: rd6281a: Add kwbimage build support Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
Simon Kagstrom (1): Support for the OpenRD base board
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/Marvell/mv88f6281gtw_ge/config.mk | 3 + board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165
+++++++++++++++++++++
board/Marvell/openrd_base/Makefile | 56 +++++++ board/Marvell/openrd_base/config.mk | 33 ++++ board/Marvell/openrd_base/kwbimage.cfg | 168
+++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.c | 160
++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.h | 46 ++++++ board/Marvell/rd6281a/config.mk | 3 + board/Marvell/rd6281a/kwbimage.cfg | 167
+++++++++++++++++++++
include/configs/openrd_base.h | 220
++++++++++++++++++++++++++++
13 files changed, 1029 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/Makefile create mode 100644 board/Marvell/openrd_base/config.mk create mode 100644 board/Marvell/openrd_base/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/openrd_base.c create mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 board/Marvell/rd6281a/kwbimage.cfg create mode 100644 include/configs/openrd_base.h
Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-----Original Message----- From: Tom [mailto:Tom.Rix@windriver.com] Sent: Monday, September 28, 2009 5:21 AM To: Prafulla Wadaskar Cc: U-Boot Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
Prafulla Wadaskar wrote:
-----Original Message----- From: Tom [mailto:Tom.Rix@windriver.com] Sent: Tuesday, September 22, 2009 12:46 AM To: Prafulla Wadaskar Cc: U-Boot Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
Prafulla Wadaskar wrote:
Hi Wolfgang
Please pull
Shouldn't this rather get pulled to u-boot-arm? Tom
Hi Tom, Yes :-) you are right. I was bit biased since u-boot-marvell.git was cloned from u-boot.git Shall I generate new email pull request? Or Can you please kindly pull it to u-boot-arm?
Regards.. Prafulla . .
Prafulla,
The commits have been pulled to arm/next.
openrd_base had this ERR in MAKEALL arm
kirkwood_egiga.c: In function 'kwgbe_init': kirkwood_egiga.c:445: warning: dereferencing type-punned pointer will break strict-aliasing rules kirkwood_egiga.c: In function 'kwgbe_recv': kirkwood_egiga.c:606: warning: dereferencing type-punned pointer will break strict-aliasing rules
Please verify the commits have made it into arm/next and help resolve the error in openrd_base.
Hi Tom
Yes I observed this too, I didn't observed it earlier, in last release. I think this is poped up due to gcc clean up patch. I was in process to fix this, unfortunately I could not push it up as suggested earlier due to some issues and holidays at our end.
Regards.. Prafulla . .
Tom
The following changes since commit
3b6a9267f0de7b85d387fa4123d0b58379363447:
Wolfgang Denk (1): board/flagadm/flash.c: fix compile warning
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git master
Prafulla Wadaskar (2): Kirkwood: rd6281a: Add kwbimage build support Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
Simon Kagstrom (1): Support for the OpenRD base board
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/Marvell/mv88f6281gtw_ge/config.mk | 3 + board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165
+++++++++++++++++++++
board/Marvell/openrd_base/Makefile | 56 +++++++ board/Marvell/openrd_base/config.mk | 33 ++++ board/Marvell/openrd_base/kwbimage.cfg | 168
+++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.c | 160
++++++++++++++++++++
board/Marvell/openrd_base/openrd_base.h | 46 ++++++ board/Marvell/rd6281a/config.mk | 3 + board/Marvell/rd6281a/kwbimage.cfg | 167
+++++++++++++++++++++
include/configs/openrd_base.h | 220
++++++++++++++++++++++++++++
13 files changed, 1029 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/Makefile create mode 100644 board/Marvell/openrd_base/config.mk create mode 100644 board/Marvell/openrd_base/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/openrd_base.c create mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 board/Marvell/rd6281a/kwbimage.cfg create mode 100644 include/configs/openrd_base.h
Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
participants (3)
-
Prafulla Wadaskar -
Tom -
Wolfgang Denk