[U-Boot] [PATCH] ARM: mx6ul: Apply ERR011115 errata workaround
ERR011115 in IMX6UL errata says to use OCRAM memory above 0x908000 (instead of 0x907000) for silicon revision 1.2 shipped prior date code 1740.
As we cannot check affected targets in runtime, apply that workaround by default for all IMX6UL platforms. Leave possibility to disable that workaround for non-affected targets, so more OCRAM area can be used by SPL (e.g. for featureful SPL images).
Signed-off-by: Marcin Niestroj m.niestroj@grinn-global.com --- arch/arm/mach-imx/mx6/Kconfig | 9 +++++++++ include/configs/imx6_spl.h | 11 +++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 521fad74b5..61708a0526 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -58,6 +58,15 @@ config MX6UL select SYSCOUNTER_TIMER bool
+config MX6UL_ERR011115 + bool "Workaround for ERR011115 in IMX6UL Errata" + depends on MX6UL + default MX6UL + help + Say N here if you are sure that your platform is not affected + with ERR011115. Doing so might be useful in case of featureful + (big) SPL images. + config MX6UL_LITESOM bool select MX6UL diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 720ff045a7..42d12c7503 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -19,16 +19,23 @@ * which consists of a 4K header in front of us that contains the IVT, DCD * and some padding thus 'our' max size is really 0x00908000 - 0x00918000 * or 64KB + * - Use 0x00909000 as start of OCRAM Free Area as a workaround for + * ERR011115 in IMX6UL Errata */ +#ifdef CONFIG_MX6UL_ERR011115 +#define CONFIG_SPL_TEXT_BASE 0x00909000 +#else #define CONFIG_SPL_TEXT_BASE 0x00908000 -#define CONFIG_SPL_MAX_SIZE 0x10000 +#endif + +#define CONFIG_SPL_MAX_SIZE (0x00918000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK 0x0091FFB8 /* * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a * boot media (given that boot media specific offset is configured properly). */ -#define CONFIG_SPL_PAD_TO 0x11000 +#define CONFIG_SPL_PAD_TO (CONFIG_SPL_MAX_SIZE + 0x1000)
/* MMC support */ #if defined(CONFIG_SPL_MMC_SUPPORT)
Hi Marcin,
On Thu, Jul 19, 2018 at 8:37 AM, Marcin Niestroj m.niestroj@grinn-global.com wrote:
ERR011115 in IMX6UL errata says to use OCRAM memory above 0x908000 (instead of 0x907000) for silicon revision 1.2 shipped prior date code 1740.
As we cannot check affected targets in runtime, apply that workaround by default for all IMX6UL platforms. Leave possibility to disable that workaround for non-affected targets, so more OCRAM area can be used by SPL (e.g. for featureful SPL images).
Signed-off-by: Marcin Niestroj m.niestroj@grinn-global.com
It seems this is the best we can do, thanks:
Reviewed-by: Fabio Estevam fabio.estevam@nxp.com
Hi,
On 07/19/2018 01:37 PM, Marcin Niestroj wrote:
ERR011115 in IMX6UL errata says to use OCRAM memory above 0x908000 (instead of 0x907000) for silicon revision 1.2 shipped prior date code 1740.
As we cannot check affected targets in runtime, apply that workaround by default for all IMX6UL platforms. Leave possibility to disable that workaround for non-affected targets, so more OCRAM area can be used by SPL (e.g. for featureful SPL images).
Signed-off-by: Marcin Niestroj m.niestroj@grinn-global.com
arch/arm/mach-imx/mx6/Kconfig | 9 +++++++++ include/configs/imx6_spl.h | 11 +++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 521fad74b5..61708a0526 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -58,6 +58,15 @@ config MX6UL select SYSCOUNTER_TIMER bool
+config MX6UL_ERR011115
- bool "Workaround for ERR011115 in IMX6UL Errata"
- depends on MX6UL
- default MX6UL
- help
Say N here if you are sure that your platform is not affectedwith ERR011115. Doing so might be useful in case of featureful(big) SPL images.config MX6UL_LITESOM bool select MX6UL diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 720ff045a7..42d12c7503 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -19,16 +19,23 @@
- which consists of a 4K header in front of us that contains the IVT, DCD
- and some padding thus 'our' max size is really 0x00908000 - 0x00918000
- or 64KB
- Use 0x00909000 as start of OCRAM Free Area as a workaround for
*/
- ERR011115 in IMX6UL Errata
+#ifdef CONFIG_MX6UL_ERR011115 +#define CONFIG_SPL_TEXT_BASE 0x00909000 +#else #define CONFIG_SPL_TEXT_BASE 0x00908000 -#define CONFIG_SPL_MAX_SIZE 0x10000 +#endif
+#define CONFIG_SPL_MAX_SIZE (0x00918000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK 0x0091FFB8 /*
- Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
- SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
- boot media (given that boot media specific offset is configured properly).
*/ -#define CONFIG_SPL_PAD_TO 0x11000 +#define CONFIG_SPL_PAD_TO (CONFIG_SPL_MAX_SIZE + 0x1000)
I got the following error when building the u-boot-with-spl.imx file:
/home/sszy/development/armadeus-git-opos6ul/buildroot/output/host/usr/bin/arm-linux-gnueabihf-objcopy: --pad-to: bad number: (CONFIG_SPL_MAX_SIZE + 0x1000)
Anyway, this is wrong and will break the u-boot-with-spl.imx for MMC/SD boot device.
The default offset for the U-Boot image on MMC/SD boot device is 69KB (see SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) so I think CONFIG_SPL_PAD_TO should always be 0x11000 (== 68KB).
Regards,
/* MMC support */ #if defined(CONFIG_SPL_MMC_SUPPORT)
Hi,
On 20.07.2018 16:29, Sébastien Szymanski wrote:
Hi,
On 07/19/2018 01:37 PM, Marcin Niestroj wrote:
ERR011115 in IMX6UL errata says to use OCRAM memory above 0x908000 (instead of 0x907000) for silicon revision 1.2 shipped prior date code 1740.
As we cannot check affected targets in runtime, apply that workaround by default for all IMX6UL platforms. Leave possibility to disable that workaround for non-affected targets, so more OCRAM area can be used by SPL (e.g. for featureful SPL images).
Signed-off-by: Marcin Niestroj m.niestroj@grinn-global.com
arch/arm/mach-imx/mx6/Kconfig | 9 +++++++++ include/configs/imx6_spl.h | 11 +++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 521fad74b5..61708a0526 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -58,6 +58,15 @@ config MX6UL select SYSCOUNTER_TIMER bool
+config MX6UL_ERR011115
- bool "Workaround for ERR011115 in IMX6UL Errata"
- depends on MX6UL
- default MX6UL
- help
Say N here if you are sure that your platform is not affectedwith ERR011115. Doing so might be useful in case of featureful(big) SPL images.- config MX6UL_LITESOM bool select MX6UL
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 720ff045a7..42d12c7503 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -19,16 +19,23 @@
- which consists of a 4K header in front of us that contains the IVT, DCD
- and some padding thus 'our' max size is really 0x00908000 - 0x00918000
- or 64KB
- Use 0x00909000 as start of OCRAM Free Area as a workaround for
*/
- ERR011115 in IMX6UL Errata
+#ifdef CONFIG_MX6UL_ERR011115 +#define CONFIG_SPL_TEXT_BASE 0x00909000 +#else #define CONFIG_SPL_TEXT_BASE 0x00908000 -#define CONFIG_SPL_MAX_SIZE 0x10000 +#endif
+#define CONFIG_SPL_MAX_SIZE (0x00918000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK 0x0091FFB8 /*
- Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
- SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
- boot media (given that boot media specific offset is configured properly).
*/ -#define CONFIG_SPL_PAD_TO 0x11000 +#define CONFIG_SPL_PAD_TO (CONFIG_SPL_MAX_SIZE + 0x1000)
I got the following error when building the u-boot-with-spl.imx file:
/home/sszy/development/armadeus-git-opos6ul/buildroot/output/host/usr/bin/arm-linux-gnueabihf-objcopy: --pad-to: bad number: (CONFIG_SPL_MAX_SIZE + 0x1000)
Anyway, this is wrong and will break the u-boot-with-spl.imx for MMC/SD boot device.
The default offset for the U-Boot image on MMC/SD boot device is 69KB (see SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) so I think CONFIG_SPL_PAD_TO should always be 0x11000 (== 68KB).
Thanks for catching this! You are right, CONFIG_SPL_PAD_TO is used during u-boot with spl single image generation (always with objcopy + cat). Using 0x11000 value fixes build and makes u-boot-with-spl.imx successfully booting SPL as well as u-boot.
I will post new patch with this issue fixed soon.
Regards,
/* MMC support */ #if defined(CONFIG_SPL_MMC_SUPPORT)
Hi Marcin,
On 19/07/2018 13:37, Marcin Niestroj wrote:
ERR011115 in IMX6UL errata says to use OCRAM memory above 0x908000 (instead of 0x907000) for silicon revision 1.2 shipped prior date code 1740.
As we cannot check affected targets in runtime, apply that workaround by default for all IMX6UL platforms. Leave possibility to disable that workaround for non-affected targets, so more OCRAM area can be used by SPL (e.g. for featureful SPL images).
I had a project with this issue - anyway, I disagree to apply the work-around for all MX6UL.
Rather, we have no possibilities to detect and solve this at runtime. SPL is already loaded. But NXP has already fixed this in later production. Companies already know if there production is affected or not, and they can enable MX6UL_ERR011115 for their products.
We are already fighting with the OCRAM size, specially if other features (HAB and secure boot, further filesystems) are enabled. Reducing size is ok for some products (they cannot do in other way if they have some of these broken devices), it is not ok for other ones.
I will propose to not set it as default for MX6UL.
Signed-off-by: Marcin Niestroj m.niestroj@grinn-global.com
arch/arm/mach-imx/mx6/Kconfig | 9 +++++++++ include/configs/imx6_spl.h | 11 +++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 521fad74b5..61708a0526 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -58,6 +58,15 @@ config MX6UL select SYSCOUNTER_TIMER bool
+config MX6UL_ERR011115
- bool "Workaround for ERR011115 in IMX6UL Errata"
- depends on MX6UL
- default MX6UL
- help
Say N here if you are sure that your platform is not affectedwith ERR011115. Doing so might be useful in case of featureful(big) SPL images.
Boards Maintainer should decide themselves instead of setting this as default.
config MX6UL_LITESOM bool select MX6UL diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 720ff045a7..42d12c7503 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -19,16 +19,23 @@
- which consists of a 4K header in front of us that contains the IVT, DCD
- and some padding thus 'our' max size is really 0x00908000 - 0x00918000
- or 64KB
- Use 0x00909000 as start of OCRAM Free Area as a workaround for
*/
- ERR011115 in IMX6UL Errata
+#ifdef CONFIG_MX6UL_ERR011115 +#define CONFIG_SPL_TEXT_BASE 0x00909000 +#else #define CONFIG_SPL_TEXT_BASE 0x00908000 -#define CONFIG_SPL_MAX_SIZE 0x10000 +#endif
+#define CONFIG_SPL_MAX_SIZE (0x00918000 - CONFIG_SPL_TEXT_BASE)
Sebastian has already reported that this is wrong. Anyway, even if this was correct, it would be another issue and should be fixed in a separate patch. The issue in the commit messsage is fixed just moving CONFIG_MX6UL_ERR011115.
#define CONFIG_SPL_STACK 0x0091FFB8 /*
- Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
- SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
- boot media (given that boot media specific offset is configured properly).
*/ -#define CONFIG_SPL_PAD_TO 0x11000 +#define CONFIG_SPL_PAD_TO (CONFIG_SPL_MAX_SIZE + 0x1000)
/* MMC support */ #if defined(CONFIG_SPL_MMC_SUPPORT)
Best regards, Stefano Babic
Hi Stefano,
On 23.07.2018 10:09, Stefano Babic wrote:
Hi Marcin,
On 19/07/2018 13:37, Marcin Niestroj wrote:
ERR011115 in IMX6UL errata says to use OCRAM memory above 0x908000 (instead of 0x907000) for silicon revision 1.2 shipped prior date code 1740.
As we cannot check affected targets in runtime, apply that workaround by default for all IMX6UL platforms. Leave possibility to disable that workaround for non-affected targets, so more OCRAM area can be used by SPL (e.g. for featureful SPL images).
I had a project with this issue - anyway, I disagree to apply the work-around for all MX6UL.
Rather, we have no possibilities to detect and solve this at runtime. SPL is already loaded. But NXP has already fixed this in later production. Companies already know if there production is affected or not, and they can enable MX6UL_ERR011115 for their products.
I am not sure companies know about affected chips. We already know (you and me) that such issue exists, because we've already run into it. Unfortunately it took time to figure out what was the real reason of non-functional device. Our client has manufactured devices (prototypes, but still...) with affected chips in last two weeks, so in my opinion it is easy to run into problems. So the idea of this patch was to prevent that in future for all i.MX6UL boards.
In my opinion it is easier to figure out that ERR011115 workaround can be disabled (after verifying that we do not use affected chips) instead of figuring out why we have non-functional device (because we were not aware of ERR011115 issue).
We are already fighting with the OCRAM size, specially if other features (HAB and secure boot, further filesystems) are enabled. Reducing size is ok for some products (they cannot do in other way if they have some of these broken devices), it is not ok for other ones.
I will propose to not set it as default for MX6UL.
Signed-off-by: Marcin Niestroj m.niestroj@grinn-global.com
arch/arm/mach-imx/mx6/Kconfig | 9 +++++++++ include/configs/imx6_spl.h | 11 +++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 521fad74b5..61708a0526 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -58,6 +58,15 @@ config MX6UL select SYSCOUNTER_TIMER bool
+config MX6UL_ERR011115
- bool "Workaround for ERR011115 in IMX6UL Errata"
- depends on MX6UL
- default MX6UL
- help
Say N here if you are sure that your platform is not affectedwith ERR011115. Doing so might be useful in case of featureful(big) SPL images.Boards Maintainer should decide themselves instead of setting this as default.
As written above, I do not think that board maintainer is usually the person that knows which chip revision will be used in production.
- config MX6UL_LITESOM bool select MX6UL
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 720ff045a7..42d12c7503 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -19,16 +19,23 @@
- which consists of a 4K header in front of us that contains the IVT, DCD
- and some padding thus 'our' max size is really 0x00908000 - 0x00918000
- or 64KB
- Use 0x00909000 as start of OCRAM Free Area as a workaround for
*/
- ERR011115 in IMX6UL Errata
+#ifdef CONFIG_MX6UL_ERR011115 +#define CONFIG_SPL_TEXT_BASE 0x00909000 +#else #define CONFIG_SPL_TEXT_BASE 0x00908000 -#define CONFIG_SPL_MAX_SIZE 0x10000 +#endif
+#define CONFIG_SPL_MAX_SIZE (0x00918000 - CONFIG_SPL_TEXT_BASE)
Sebastian has already reported that this is wrong. Anyway, even if this was correct, it would be another issue and should be fixed in a separate patch. The issue in the commit messsage is fixed just moving CONFIG_MX6UL_ERR011115.
Sebastian reported CONFIG_SPL_PAD_TO to be wrong and I agree with that. However CONFIG_SPL_MAX_SIZE in my opinion should be set as I proposed. It is only used in linker scripts, mainly to check that we fit our code within maximum SPL size.
Regards, Marcin
#define CONFIG_SPL_STACK 0x0091FFB8 /*
- Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
- SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
- boot media (given that boot media specific offset is configured properly).
*/ -#define CONFIG_SPL_PAD_TO 0x11000 +#define CONFIG_SPL_PAD_TO (CONFIG_SPL_MAX_SIZE + 0x1000)
/* MMC support */ #if defined(CONFIG_SPL_MMC_SUPPORT)
Best regards, Stefano Babic
participants (4)
-
Fabio Estevam -
Marcin Niestroj -
Stefano Babic -
Sébastien Szymanski