[U-Boot] [PATCH v2 0/8] board: sama5d4: convert boards to support DM/DT
The purpose of patch set is to convert the board to support Device Tree and Driver Model.
They are based on the following patches: 1./ [PATCH v3 0/2] pinctrl: at91: Add pinctrl driver http://lists.denx.de/pipermail/u-boot/2016-October/270991.html 2./ [PATCH v1 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D4 http://lists.denx.de/pipermail/u-boot/2016-October/271004.html 3./ [PATCH v3 0/2] serial: atmel_usart: Support to enable an early debug UART http://lists.denx.de/pipermail/u-boot/2016-October/270250.html 4./ [PATCH v1 0/3] gpio: at91_gpio: Add option and clock support http://lists.denx.de/pipermail/u-boot/2016-October/270687.html 5./ [PATCH v10] dm: at91: Add driver model support for the spi driver http://lists.denx.de/pipermail/u-boot/2016-October/270516.html
Changes in v2: - Restore the wrong removal #define CONFIG_USB_ETHER. - Update the commit log. - Restore the wrong removal of USB related code. - Update the commit log. - Restore wrong removal of #define CONFIG_USB_ETHER. - Update the commit log. - Restore the wrong removal USB related code. - Update the commit log.
Wenyou Yang (8): configs: at91-sama5_common: fix for CONFIG_AT91_GPIO board: sama5d4_xplained: move config options to defconfig board: sama5d4_xplained: clean up code board: sama5d4_xplained: enable early debug UART board: sama5d4ek: move config options to defconfig board: sama5d4ek: clean up code board: sama5d4ek: enable early debug UART configs: sama5d4: move CONFIG_SYS_NO_FLASH to *defconfig
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 100 ++++------------------- board/atmel/sama5d4ek/sama5d4ek.c | 101 ++++-------------------- configs/sama5d4_xplained_mmc_defconfig | 31 +++++++- configs/sama5d4_xplained_nandflash_defconfig | 33 +++++++- configs/sama5d4_xplained_spiflash_defconfig | 31 +++++++- configs/sama5d4ek_mmc_defconfig | 30 +++++++ configs/sama5d4ek_nandflash_defconfig | 30 +++++++ configs/sama5d4ek_spiflash_defconfig | 30 +++++++ include/configs/at91-sama5_common.h | 2 + include/configs/sama5d4_xplained.h | 28 +------ include/configs/sama5d4ek.h | 29 +------ 11 files changed, 216 insertions(+), 229 deletions(-)
If enabled Driver Model for GPIO, CONFIG_AT91_GPIO should be defined by configs/*_defconfig file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v2: None
include/configs/at91-sama5_common.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index b09ef33..98e3f0e 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -29,7 +29,9 @@ #define CONFIG_ENV_VARS_UBOOT_CONFIG
/* general purpose I/O */ +#ifndef CONFIG_DM_GPIO #define CONFIG_AT91_GPIO +#endif
/*
On Fri, Oct 28, 2016 at 03:16:42PM +0800, Wenyou Yang wrote:
If enabled Driver Model for GPIO, CONFIG_AT91_GPIO should be defined by configs/*_defconfig file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2: None
include/configs/at91-sama5_common.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index b09ef33..98e3f0e 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -29,7 +29,9 @@ #define CONFIG_ENV_VARS_UBOOT_CONFIG
/* general purpose I/O */ +#ifndef CONFIG_DM_GPIO #define CONFIG_AT91_GPIO +#endif
/*
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock driver and at91 pinctrl driver.
Move some config options to configs/sama5d4_xplained_*_defconfig files.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v2: - Restore the wrong removal #define CONFIG_USB_ETHER. - Update the commit log.
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 2 ++ configs/sama5d4_xplained_mmc_defconfig | 24 ++++++++++++++++++++++- configs/sama5d4_xplained_nandflash_defconfig | 26 ++++++++++++++++++++++++- configs/sama5d4_xplained_spiflash_defconfig | 24 ++++++++++++++++++++++- include/configs/sama5d4_xplained.h | 25 ------------------------ 5 files changed, 73 insertions(+), 28 deletions(-)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 47f0bae..6684276 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -28,10 +28,12 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ATMEL_SPI +#ifndef CONFIG_DM_SPI int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus == 0 && cs == 0; } +#endif
void spi_cs_activate(struct spi_slave *slave) { diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index 5ff4688..e25b26a 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 @@ -26,10 +27,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 800a8b2..53dfdd6 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 @@ -21,13 +22,36 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index e5d2f54..17fd9a2 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 @@ -25,10 +26,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 249e661..1173583 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -15,11 +15,6 @@
#include "at91-sama5_common.h"
-/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3 - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -34,16 +29,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-/* SerialFlash */ - -#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_ATMEL_SPI0 -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif - /* NAND flash */ #define CONFIG_CMD_NAND
@@ -66,16 +51,6 @@ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 -#endif - -/* USB */ - -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #endif
/* USB device */
On Fri, Oct 28, 2016 at 03:16:43PM +0800, Wenyou Yang wrote:
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock driver and at91 pinctrl driver.
Move some config options to configs/sama5d4_xplained_*_defconfig files.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2:
- Restore the wrong removal #define CONFIG_USB_ETHER.
- Update the commit log.
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 2 ++ configs/sama5d4_xplained_mmc_defconfig | 24 ++++++++++++++++++++++- configs/sama5d4_xplained_nandflash_defconfig | 26 ++++++++++++++++++++++++- configs/sama5d4_xplained_spiflash_defconfig | 24 ++++++++++++++++++++++- include/configs/sama5d4_xplained.h | 25 ------------------------ 5 files changed, 73 insertions(+), 28 deletions(-)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 47f0bae..6684276 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -28,10 +28,12 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ATMEL_SPI +#ifndef CONFIG_DM_SPI int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus == 0 && cs == 0; } +#endif
void spi_cs_activate(struct spi_slave *slave) { diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index 5ff4688..e25b26a 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 @@ -26,10 +27,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 800a8b2..53dfdd6 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 @@ -21,13 +22,36 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index e5d2f54..17fd9a2 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 @@ -25,10 +26,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 249e661..1173583 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -15,11 +15,6 @@
#include "at91-sama5_common.h"
-/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3
/* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -34,16 +29,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-/* SerialFlash */
-#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_ATMEL_SPI0 -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif
/* NAND flash */ #define CONFIG_CMD_NAND
@@ -66,16 +51,6 @@ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 -#endif
-/* USB */
-#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #endif
/* USB device */
On Fri, Oct 28, 2016 at 03:16:43PM +0800, Wenyou Yang wrote:
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock driver and at91 pinctrl driver.
Move some config options to configs/sama5d4_xplained_*_defconfig files.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2:
- Restore the wrong removal #define CONFIG_USB_ETHER.
- Update the commit log.
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 2 ++ configs/sama5d4_xplained_mmc_defconfig | 24 ++++++++++++++++++++++- configs/sama5d4_xplained_nandflash_defconfig | 26 ++++++++++++++++++++++++- configs/sama5d4_xplained_spiflash_defconfig | 24 ++++++++++++++++++++++- include/configs/sama5d4_xplained.h | 25 ------------------------ 5 files changed, 73 insertions(+), 28 deletions(-)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 47f0bae..6684276 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -28,10 +28,12 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ATMEL_SPI +#ifndef CONFIG_DM_SPI int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus == 0 && cs == 0; } +#endif
void spi_cs_activate(struct spi_slave *slave) { diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index 5ff4688..e25b26a 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 @@ -26,10 +27,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 800a8b2..53dfdd6 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 @@ -21,13 +22,36 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index e5d2f54..17fd9a2 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 @@ -25,10 +26,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 249e661..1173583 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -15,11 +15,6 @@
#include "at91-sama5_common.h"
-/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3
/* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -34,16 +29,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-/* SerialFlash */
-#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_ATMEL_SPI0 -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif
/* NAND flash */ #define CONFIG_CMD_NAND
@@ -66,16 +51,6 @@ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 -#endif
-/* USB */
-#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #endif
/* USB device */
On Fri, Oct 28, 2016 at 03:16:43PM +0800, Wenyou Yang wrote:
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock driver and at91 pinctrl driver.
Move some config options to configs/sama5d4_xplained_*_defconfig files.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2:
- Restore the wrong removal #define CONFIG_USB_ETHER.
- Update the commit log.
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 2 ++ configs/sama5d4_xplained_mmc_defconfig | 24 ++++++++++++++++++++++- configs/sama5d4_xplained_nandflash_defconfig | 26 ++++++++++++++++++++++++- configs/sama5d4_xplained_spiflash_defconfig | 24 ++++++++++++++++++++++- include/configs/sama5d4_xplained.h | 25 ------------------------ 5 files changed, 73 insertions(+), 28 deletions(-)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 47f0bae..6684276 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -28,10 +28,12 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ATMEL_SPI +#ifndef CONFIG_DM_SPI int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus == 0 && cs == 0; } +#endif
void spi_cs_activate(struct spi_slave *slave) { diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index 5ff4688..e25b26a 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 @@ -26,10 +27,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 800a8b2..53dfdd6 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 @@ -21,13 +22,36 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index e5d2f54..17fd9a2 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 @@ -25,10 +26,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 249e661..1173583 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -15,11 +15,6 @@
#include "at91-sama5_common.h"
-/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3
/* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -34,16 +29,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-/* SerialFlash */
-#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_ATMEL_SPI0 -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif
/* NAND flash */ #define CONFIG_CMD_NAND
@@ -66,16 +51,6 @@ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 -#endif
-/* USB */
-#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #endif
/* USB device */
Since the introduction of the pinctrl and clk driver and the dts file, remove unneeded hard coded related code from the board file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v2: - Restore the wrong removal of USB related code. - Update the commit log.
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 87 +------------------------ 1 file changed, 1 insertion(+), 86 deletions(-)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 6684276..2b51e4c 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -16,48 +16,14 @@ #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> -#include <atmel_mci.h> #include <lcd.h> -#include <mmc.h> #include <net.h> #include <netdev.h> #include <nand.h> -#include <spi.h> #include <version.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_ATMEL_SPI -#ifndef CONFIG_DM_SPI -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs == 0; -} -#endif - -void spi_cs_activate(struct spi_slave *slave) -{ - at91_set_pio_output(AT91_PIO_PORTC, 3, 0); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); -} - -static void sama5d4_xplained_spi0_hw_init(void) -{ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ - - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_SPI0); -} -#endif /* CONFIG_ATMEL_SPI */ - #ifdef CONFIG_NAND_ATMEL static void sama5d4_xplained_nand_hw_init(void) { @@ -202,41 +168,6 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD */
-#ifdef CONFIG_GENERIC_ATMEL_MCI -void sama5d4_xplained_mci1_hw_init(void) -{ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */ - - /* - * As the mci io internal pull down is too strong, so if the io needs - * external pull up, the pull up resistor will be very small, if so - * the power consumption will increase, so disable the interanl pull - * down to save the power. - */ - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0); - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_MCI1); -} - -int board_mmc_init(bd_t *bis) -{ - /* Enable the power supply */ - at91_set_pio_output(AT91_PIO_PORTE, 4, 0); - - return atmel_mci_init((void *)ATMEL_BASE_MCI1); -} -#endif /* CONFIG_GENERIC_ATMEL_MCI */
#ifdef CONFIG_MACB void sama5d4_xplained_macb0_hw_init(void) @@ -268,12 +199,6 @@ static void sama5d4_xplained_serial3_hw_init(void)
int board_early_init_f(void) { - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_periph_clk_enable(ATMEL_ID_PIOB); - at91_periph_clk_enable(ATMEL_ID_PIOC); - at91_periph_clk_enable(ATMEL_ID_PIOD); - at91_periph_clk_enable(ATMEL_ID_PIOE); - sama5d4_xplained_serial3_hw_init();
return 0; @@ -284,15 +209,9 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_ATMEL_SPI - sama5d4_xplained_spi0_hw_init(); -#endif #ifdef CONFIG_NAND_ATMEL sama5d4_xplained_nand_hw_init(); #endif -#ifdef CONFIG_GENERIC_ATMEL_MCI - sama5d4_xplained_mci1_hw_init(); -#endif #ifdef CONFIG_MACB sama5d4_xplained_macb0_hw_init(); #endif @@ -338,12 +257,8 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_SPL_BUILD void spl_board_init(void) { -#ifdef CONFIG_SYS_USE_MMC - sama5d4_xplained_mci1_hw_init(); -#elif CONFIG_SYS_USE_NANDFLASH +#if CONFIG_SYS_USE_NANDFLASH sama5d4_xplained_nand_hw_init(); -#elif CONFIG_SYS_USE_SERIALFLASH - sama5d4_xplained_spi0_hw_init(); #endif }
On Fri, Oct 28, 2016 at 03:16:44PM +0800, Wenyou Yang wrote:
Since the introduction of the pinctrl and clk driver and the dts file, remove unneeded hard coded related code from the board file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2:
- Restore the wrong removal of USB related code.
- Update the commit log.
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 87 +------------------------ 1 file changed, 1 insertion(+), 86 deletions(-)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 6684276..2b51e4c 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -16,48 +16,14 @@ #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> -#include <atmel_mci.h> #include <lcd.h> -#include <mmc.h> #include <net.h> #include <netdev.h> #include <nand.h> -#include <spi.h> #include <version.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_ATMEL_SPI -#ifndef CONFIG_DM_SPI -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{
- return bus == 0 && cs == 0;
-} -#endif
-void spi_cs_activate(struct spi_slave *slave) -{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
-}
-void spi_cs_deactivate(struct spi_slave *slave) -{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
-}
-static void sama5d4_xplained_spi0_hw_init(void) -{
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_SPI0);
-} -#endif /* CONFIG_ATMEL_SPI */
#ifdef CONFIG_NAND_ATMEL static void sama5d4_xplained_nand_hw_init(void) { @@ -202,41 +168,6 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD */
-#ifdef CONFIG_GENERIC_ATMEL_MCI -void sama5d4_xplained_mci1_hw_init(void) -{
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
- /*
* As the mci io internal pull down is too strong, so if the io needs* external pull up, the pull up resistor will be very small, if so* the power consumption will increase, so disable the interanl pull* down to save the power.*/- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_MCI1);
-}
-int board_mmc_init(bd_t *bis) -{
- /* Enable the power supply */
- at91_set_pio_output(AT91_PIO_PORTE, 4, 0);
- return atmel_mci_init((void *)ATMEL_BASE_MCI1);
-} -#endif /* CONFIG_GENERIC_ATMEL_MCI */
#ifdef CONFIG_MACB void sama5d4_xplained_macb0_hw_init(void) @@ -268,12 +199,6 @@ static void sama5d4_xplained_serial3_hw_init(void)
int board_early_init_f(void) {
at91_periph_clk_enable(ATMEL_ID_PIOA);
at91_periph_clk_enable(ATMEL_ID_PIOB);
at91_periph_clk_enable(ATMEL_ID_PIOC);
at91_periph_clk_enable(ATMEL_ID_PIOD);
at91_periph_clk_enable(ATMEL_ID_PIOE);
sama5d4_xplained_serial3_hw_init();
return 0;
@@ -284,15 +209,9 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_ATMEL_SPI
- sama5d4_xplained_spi0_hw_init();
-#endif #ifdef CONFIG_NAND_ATMEL sama5d4_xplained_nand_hw_init(); #endif -#ifdef CONFIG_GENERIC_ATMEL_MCI
- sama5d4_xplained_mci1_hw_init();
-#endif #ifdef CONFIG_MACB sama5d4_xplained_macb0_hw_init(); #endif @@ -338,12 +257,8 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_SPL_BUILD void spl_board_init(void) { -#ifdef CONFIG_SYS_USE_MMC
- sama5d4_xplained_mci1_hw_init();
-#elif CONFIG_SYS_USE_NANDFLASH +#if CONFIG_SYS_USE_NANDFLASH sama5d4_xplained_nand_hw_init(); -#elif CONFIG_SYS_USE_SERIALFLASH
- sama5d4_xplained_spi0_hw_init();
#endif }
Enable early debug UART to debug problems when an ICE or other debug mechanism is not available.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v2: None
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 15 ++++++++++++++- configs/sama5d4_xplained_mmc_defconfig | 6 ++++++ configs/sama5d4_xplained_nandflash_defconfig | 6 ++++++ configs/sama5d4_xplained_spiflash_defconfig | 6 ++++++ include/configs/sama5d4_xplained.h | 2 ++ 5 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 2b51e4c..c46a7a4 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -16,6 +16,7 @@ #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> +#include <debug_uart.h> #include <lcd.h> #include <net.h> #include <netdev.h> @@ -197,12 +198,24 @@ static void sama5d4_xplained_serial3_hw_init(void) at91_periph_clk_enable(ATMEL_ID_USART3); }
-int board_early_init_f(void) +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) { sama5d4_xplained_serial3_hw_init(); +} +#endif
+#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#else + sama5d4_xplained_serial3_hw_init(); +#endif return 0; } +#endif
int board_init(void) { diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index e25b26a..e7518e8 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -46,6 +46,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 53dfdd6..790d7d1 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -45,6 +45,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index 17fd9a2..af6263f 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -45,6 +45,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 1173583..8032164 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -15,6 +15,8 @@
#include "at91-sama5_common.h"
+#define CONFIG_BOARD_EARLY_INIT_F + /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
On Fri, Oct 28, 2016 at 03:16:45PM +0800, Wenyou Yang wrote:
Enable early debug UART to debug problems when an ICE or other debug mechanism is not available.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2: None
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 15 ++++++++++++++- configs/sama5d4_xplained_mmc_defconfig | 6 ++++++ configs/sama5d4_xplained_nandflash_defconfig | 6 ++++++ configs/sama5d4_xplained_spiflash_defconfig | 6 ++++++ include/configs/sama5d4_xplained.h | 2 ++ 5 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 2b51e4c..c46a7a4 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -16,6 +16,7 @@ #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> +#include <debug_uart.h> #include <lcd.h> #include <net.h> #include <netdev.h> @@ -197,12 +198,24 @@ static void sama5d4_xplained_serial3_hw_init(void) at91_periph_clk_enable(ATMEL_ID_USART3); }
-int board_early_init_f(void) +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) { sama5d4_xplained_serial3_hw_init(); +} +#endif
+#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ +#ifdef CONFIG_DEBUG_UART
- debug_uart_init();
+#else
- sama5d4_xplained_serial3_hw_init();
+#endif return 0; } +#endif
int board_init(void) { diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index e25b26a..e7518e8 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -46,6 +46,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 53dfdd6..790d7d1 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -45,6 +45,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index 17fd9a2..af6263f 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -45,6 +45,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 1173583..8032164 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -15,6 +15,8 @@
#include "at91-sama5_common.h"
+#define CONFIG_BOARD_EARLY_INIT_F
/* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock driver and at91 pinctrl driver.
Move some config options to configs/sama5d4ek_*_defconfig.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v2: - Restore wrong removal of #define CONFIG_USB_ETHER. - Update the commit log.
board/atmel/sama5d4ek/sama5d4ek.c | 2 ++ configs/sama5d4ek_mmc_defconfig | 23 +++++++++++++++++++++++ configs/sama5d4ek_nandflash_defconfig | 23 +++++++++++++++++++++++ configs/sama5d4ek_spiflash_defconfig | 23 +++++++++++++++++++++++ include/configs/sama5d4ek.h | 26 -------------------------- 5 files changed, 71 insertions(+), 26 deletions(-)
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index d1b5ff5..a0e4bb7 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -28,10 +28,12 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ATMEL_SPI +#ifndef CONFIG_DM_SPI int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus == 0 && cs == 0; } +#endif
void spi_cs_activate(struct spi_slave *slave) { diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index 4899970..fd49b58 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 @@ -28,9 +29,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 9ebe295..34f5234 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 @@ -26,9 +27,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index dff8995..c7f4655 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 @@ -27,9 +28,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 00ed400..b5b8e4c 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -15,11 +15,6 @@
#include "at91-sama5_common.h"
-/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3 - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -34,16 +29,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-/* SerialFlash */ - -#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_ATMEL_SPI0 -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif - /* NAND flash */ #define CONFIG_CMD_NAND
@@ -62,20 +47,9 @@ #endif
/* MMC */ - #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 -#endif - -/* USB */ - -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #endif
/* USB device */
On Fri, Oct 28, 2016 at 03:16:46PM +0800, Wenyou Yang wrote:
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock driver and at91 pinctrl driver.
Move some config options to configs/sama5d4ek_*_defconfig.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2:
- Restore wrong removal of #define CONFIG_USB_ETHER.
- Update the commit log.
board/atmel/sama5d4ek/sama5d4ek.c | 2 ++ configs/sama5d4ek_mmc_defconfig | 23 +++++++++++++++++++++++ configs/sama5d4ek_nandflash_defconfig | 23 +++++++++++++++++++++++ configs/sama5d4ek_spiflash_defconfig | 23 +++++++++++++++++++++++ include/configs/sama5d4ek.h | 26 -------------------------- 5 files changed, 71 insertions(+), 26 deletions(-)
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index d1b5ff5..a0e4bb7 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -28,10 +28,12 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ATMEL_SPI +#ifndef CONFIG_DM_SPI int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus == 0 && cs == 0; } +#endif
void spi_cs_activate(struct spi_slave *slave) { diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index 4899970..fd49b58 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 @@ -28,9 +29,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 9ebe295..34f5234 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 @@ -26,9 +27,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index dff8995..c7f4655 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 @@ -27,9 +28,31 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 00ed400..b5b8e4c 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -15,11 +15,6 @@
#include "at91-sama5_common.h"
-/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3
/* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -34,16 +29,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-/* SerialFlash */
-#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_ATMEL_SPI0 -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif
/* NAND flash */ #define CONFIG_CMD_NAND
@@ -62,20 +47,9 @@ #endif
/* MMC */
#ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 -#endif
-/* USB */
-#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #endif
/* USB device */
Since the introduction of the pinctrl and clk driver and the dts file, remove unneeded hard coded related code from the board file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v2: - Restore the wrong removal USB related code. - Update the commit log.
board/atmel/sama5d4ek/sama5d4ek.c | 88 +-------------------------------------- 1 file changed, 1 insertion(+), 87 deletions(-)
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index a0e4bb7..c5479e7 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -16,48 +16,14 @@ #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> -#include <atmel_mci.h> #include <lcd.h> -#include <mmc.h> #include <net.h> #include <netdev.h> #include <nand.h> -#include <spi.h> #include <version.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_ATMEL_SPI -#ifndef CONFIG_DM_SPI -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs == 0; -} -#endif - -void spi_cs_activate(struct spi_slave *slave) -{ - at91_set_pio_output(AT91_PIO_PORTC, 3, 0); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); -} - -static void sama5d4ek_spi0_hw_init(void) -{ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ - - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_SPI0); -} -#endif /* CONFIG_ATMEL_SPI */ - #ifdef CONFIG_NAND_ATMEL static void sama5d4ek_nand_hw_init(void) { @@ -198,42 +164,6 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD */
-#ifdef CONFIG_GENERIC_ATMEL_MCI -void sama5d4ek_mci1_hw_init(void) -{ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */ - - /* - * As the mci io internal pull down is too strong, so if the io needs - * external pull up, the pull up resistor will be very small, if so - * the power consumption will increase, so disable the interanl pull - * down to save the power. - */ - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0); - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_MCI1); -} - -int board_mmc_init(bd_t *bis) -{ - /* Enable power for MCI1 interface */ - at91_set_pio_output(AT91_PIO_PORTE, 15, 0); - - return atmel_mci_init((void *)ATMEL_BASE_MCI1); -} -#endif /* CONFIG_GENERIC_ATMEL_MCI */ - #ifdef CONFIG_MACB void sama5d4ek_macb0_hw_init(void) { @@ -264,12 +194,6 @@ static void sama5d4ek_serial3_hw_init(void)
int board_early_init_f(void) { - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_periph_clk_enable(ATMEL_ID_PIOB); - at91_periph_clk_enable(ATMEL_ID_PIOC); - at91_periph_clk_enable(ATMEL_ID_PIOD); - at91_periph_clk_enable(ATMEL_ID_PIOE); - sama5d4ek_serial3_hw_init();
return 0; @@ -280,15 +204,9 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_ATMEL_SPI - sama5d4ek_spi0_hw_init(); -#endif #ifdef CONFIG_NAND_ATMEL sama5d4ek_nand_hw_init(); #endif -#ifdef CONFIG_GENERIC_ATMEL_MCI - sama5d4ek_mci1_hw_init(); -#endif #ifdef CONFIG_MACB sama5d4ek_macb0_hw_init(); #endif @@ -334,12 +252,8 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_SPL_BUILD void spl_board_init(void) { -#ifdef CONFIG_SYS_USE_MMC - sama5d4ek_mci1_hw_init(); -#elif CONFIG_SYS_USE_NANDFLASH +#if CONFIG_SYS_USE_NANDFLASH sama5d4ek_nand_hw_init(); -#elif CONFIG_SYS_USE_SERIALFLASH - sama5d4ek_spi0_hw_init(); #endif }
On 2016-10-28 09:16, Wenyou Yang wrote:
Since the introduction of the pinctrl and clk driver and the dts file, remove unneeded hard coded related code from the board file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2:
- Restore the wrong removal USB related code.
- Update the commit log.
board/atmel/sama5d4ek/sama5d4ek.c | 88 +-------------------------------------- 1 file changed, 1 insertion(+), 87 deletions(-)
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index a0e4bb7..c5479e7 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -16,48 +16,14 @@ #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> -#include <atmel_mci.h> #include <lcd.h> -#include <mmc.h> #include <net.h> #include <netdev.h> #include <nand.h> -#include <spi.h> #include <version.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_ATMEL_SPI -#ifndef CONFIG_DM_SPI -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{
- return bus == 0 && cs == 0;
-} -#endif
-void spi_cs_activate(struct spi_slave *slave) -{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
-}
-void spi_cs_deactivate(struct spi_slave *slave) -{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
-}
-static void sama5d4ek_spi0_hw_init(void) -{
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_SPI0);
-} -#endif /* CONFIG_ATMEL_SPI */
#ifdef CONFIG_NAND_ATMEL static void sama5d4ek_nand_hw_init(void) { @@ -198,42 +164,6 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD */
-#ifdef CONFIG_GENERIC_ATMEL_MCI -void sama5d4ek_mci1_hw_init(void) -{
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
- /*
* As the mci io internal pull down is too strong, so if the io needs* external pull up, the pull up resistor will be very small, if so* the power consumption will increase, so disable the interanl pull* down to save the power.*/- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_MCI1);
-}
-int board_mmc_init(bd_t *bis) -{
- /* Enable power for MCI1 interface */
- at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
- return atmel_mci_init((void *)ATMEL_BASE_MCI1);
-} -#endif /* CONFIG_GENERIC_ATMEL_MCI */
#ifdef CONFIG_MACB void sama5d4ek_macb0_hw_init(void) { @@ -264,12 +194,6 @@ static void sama5d4ek_serial3_hw_init(void)
int board_early_init_f(void) {
at91_periph_clk_enable(ATMEL_ID_PIOA);
at91_periph_clk_enable(ATMEL_ID_PIOB);
at91_periph_clk_enable(ATMEL_ID_PIOC);
at91_periph_clk_enable(ATMEL_ID_PIOD);
at91_periph_clk_enable(ATMEL_ID_PIOE);
sama5d4ek_serial3_hw_init();
return 0;
@@ -280,15 +204,9 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_ATMEL_SPI
- sama5d4ek_spi0_hw_init();
-#endif #ifdef CONFIG_NAND_ATMEL sama5d4ek_nand_hw_init(); #endif -#ifdef CONFIG_GENERIC_ATMEL_MCI
- sama5d4ek_mci1_hw_init();
-#endif #ifdef CONFIG_MACB sama5d4ek_macb0_hw_init(); #endif @@ -334,12 +252,8 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_SPL_BUILD void spl_board_init(void) { -#ifdef CONFIG_SYS_USE_MMC
- sama5d4ek_mci1_hw_init();
-#elif CONFIG_SYS_USE_NANDFLASH +#if CONFIG_SYS_USE_NANDFLASH sama5d4ek_nand_hw_init(); -#elif CONFIG_SYS_USE_SERIALFLASH
- sama5d4ek_spi0_hw_init();
#endif }
Enable early debug UART to debug problems when an ICE or other debug mechanism is not available.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v2: None
board/atmel/sama5d4ek/sama5d4ek.c | 15 ++++++++++++++- configs/sama5d4ek_mmc_defconfig | 6 ++++++ configs/sama5d4ek_nandflash_defconfig | 6 ++++++ configs/sama5d4ek_spiflash_defconfig | 6 ++++++ include/configs/sama5d4ek.h | 2 ++ 5 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index c5479e7..2c2036c 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -17,6 +17,7 @@ #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> #include <lcd.h> +#include <debug_uart.h> #include <net.h> #include <netdev.h> #include <nand.h> @@ -192,12 +193,24 @@ static void sama5d4ek_serial3_hw_init(void) at91_periph_clk_enable(ATMEL_ID_USART3); }
-int board_early_init_f(void) +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) { sama5d4ek_serial3_hw_init(); +} +#endif
+#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#else + sama5d4ek_serial3_hw_init(); +#endif return 0; } +#endif
int board_init(void) { diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index fd49b58..76b7855 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -48,6 +48,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 34f5234..1bef322 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -46,6 +46,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index c7f4655..bd7325e 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -47,6 +47,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index b5b8e4c..964cb6b 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -15,6 +15,8 @@
#include "at91-sama5_common.h"
+#define CONFIG_BOARD_EARLY_INIT_F + /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
On 2016-10-28 09:16, Wenyou Yang wrote:
Enable early debug UART to debug problems when an ICE or other debug mechanism is not available.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2: None
board/atmel/sama5d4ek/sama5d4ek.c | 15 ++++++++++++++- configs/sama5d4ek_mmc_defconfig | 6 ++++++ configs/sama5d4ek_nandflash_defconfig | 6 ++++++ configs/sama5d4ek_spiflash_defconfig | 6 ++++++ include/configs/sama5d4ek.h | 2 ++ 5 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index c5479e7..2c2036c 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -17,6 +17,7 @@ #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> #include <lcd.h> +#include <debug_uart.h> #include <net.h> #include <netdev.h> #include <nand.h> @@ -192,12 +193,24 @@ static void sama5d4ek_serial3_hw_init(void) at91_periph_clk_enable(ATMEL_ID_USART3); }
-int board_early_init_f(void) +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) { sama5d4ek_serial3_hw_init(); +} +#endif
+#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ +#ifdef CONFIG_DEBUG_UART
- debug_uart_init();
+#else
- sama5d4ek_serial3_hw_init();
+#endif return 0; } +#endif
int board_init(void) { diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index fd49b58..76b7855 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -48,6 +48,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 34f5234..1bef322 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -46,6 +46,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index c7f4655..bd7325e 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -47,6 +47,12 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index b5b8e4c..964cb6b 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -15,6 +15,8 @@
#include "at91-sama5_common.h"
+#define CONFIG_BOARD_EARLY_INIT_F
/* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
Move CONFIG_SYS_NO_FLASH to the configs/sama5d4*_defconfig file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v2: None
configs/sama5d4_xplained_mmc_defconfig | 1 + configs/sama5d4_xplained_nandflash_defconfig | 1 + configs/sama5d4_xplained_spiflash_defconfig | 1 + configs/sama5d4ek_mmc_defconfig | 1 + configs/sama5d4ek_nandflash_defconfig | 1 + configs/sama5d4ek_spiflash_defconfig | 1 + include/configs/sama5d4_xplained.h | 3 --- include/configs/sama5d4ek.h | 3 --- 8 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index e7518e8..dfd6070 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 790d7d1..3ac745c 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index af6263f..bd3353b 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index 76b7855..799fbbc 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -14,6 +14,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 1bef322..cf2d714 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -12,6 +12,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index bd7325e..67e2fab 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -13,6 +13,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 8032164..68d7bcf 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -10,9 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H
-/* No NOR flash, this definition should put before common header */ -#define CONFIG_SYS_NO_FLASH - #include "at91-sama5_common.h"
#define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 964cb6b..fd60540 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -10,9 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H
-/* No NOR flash, this definition should put before common header */ -#define CONFIG_SYS_NO_FLASH - #include "at91-sama5_common.h"
#define CONFIG_BOARD_EARLY_INIT_F
On 2016-10-28 09:16, Wenyou Yang wrote:
Move CONFIG_SYS_NO_FLASH to the configs/sama5d4*_defconfig file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas@biessmann.org
Changes in v2: None
configs/sama5d4_xplained_mmc_defconfig | 1 + configs/sama5d4_xplained_nandflash_defconfig | 1 + configs/sama5d4_xplained_spiflash_defconfig | 1 + configs/sama5d4ek_mmc_defconfig | 1 + configs/sama5d4ek_nandflash_defconfig | 1 + configs/sama5d4ek_spiflash_defconfig | 1 + include/configs/sama5d4_xplained.h | 3 --- include/configs/sama5d4ek.h | 3 --- 8 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index e7518e8..dfd6070 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 790d7d1..3ac745c 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index af6263f..bd3353b 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index 76b7855..799fbbc 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -14,6 +14,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 1bef322..cf2d714 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -12,6 +12,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index bd7325e..67e2fab 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -13,6 +13,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 8032164..68d7bcf 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -10,9 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H
-/* No NOR flash, this definition should put before common header */ -#define CONFIG_SYS_NO_FLASH
#include "at91-sama5_common.h"
#define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 964cb6b..fd60540 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -10,9 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H
-/* No NOR flash, this definition should put before common header */ -#define CONFIG_SYS_NO_FLASH
#include "at91-sama5_common.h"
#define CONFIG_BOARD_EARLY_INIT_F
Hi Wenyou,
On 28.10.16 09:16, Wenyou Yang wrote:
The purpose of patch set is to convert the board to support Device Tree and Driver Model.
They are based on the following patches: 1./ [PATCH v3 0/2] pinctrl: at91: Add pinctrl driver http://lists.denx.de/pipermail/u-boot/2016-October/270991.html 2./ [PATCH v1 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D4 http://lists.denx.de/pipermail/u-boot/2016-October/271004.html 3./ [PATCH v3 0/2] serial: atmel_usart: Support to enable an early debug UART http://lists.denx.de/pipermail/u-boot/2016-October/270250.html 4./ [PATCH v1 0/3] gpio: at91_gpio: Add option and clock support http://lists.denx.de/pipermail/u-boot/2016-October/270687.html 5./ [PATCH v10] dm: at91: Add driver model support for the spi driver http://lists.denx.de/pipermail/u-boot/2016-October/270516.html
could you please send this series rebased on current ToT?
Andreas
Changes in v2:
- Restore the wrong removal #define CONFIG_USB_ETHER.
- Update the commit log.
- Restore the wrong removal of USB related code.
- Update the commit log.
- Restore wrong removal of #define CONFIG_USB_ETHER.
- Update the commit log.
- Restore the wrong removal USB related code.
- Update the commit log.
Wenyou Yang (8): configs: at91-sama5_common: fix for CONFIG_AT91_GPIO board: sama5d4_xplained: move config options to defconfig board: sama5d4_xplained: clean up code board: sama5d4_xplained: enable early debug UART board: sama5d4ek: move config options to defconfig board: sama5d4ek: clean up code board: sama5d4ek: enable early debug UART configs: sama5d4: move CONFIG_SYS_NO_FLASH to *defconfig
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 100 ++++------------------- board/atmel/sama5d4ek/sama5d4ek.c | 101 ++++-------------------- configs/sama5d4_xplained_mmc_defconfig | 31 +++++++- configs/sama5d4_xplained_nandflash_defconfig | 33 +++++++- configs/sama5d4_xplained_spiflash_defconfig | 31 +++++++- configs/sama5d4ek_mmc_defconfig | 30 +++++++ configs/sama5d4ek_nandflash_defconfig | 30 +++++++ configs/sama5d4ek_spiflash_defconfig | 30 +++++++ include/configs/at91-sama5_common.h | 2 + include/configs/sama5d4_xplained.h | 28 +------ include/configs/sama5d4ek.h | 29 +------ 11 files changed, 216 insertions(+), 229 deletions(-)
Hi Andreas,
Thank you very much for your review! a lot of patches.
-----Original Message----- From: Andreas Bießmann [mailto:andreas@biessmann.org] Sent: 2017年2月7日 3:52 To: Wenyou Yang - A41535 Wenyou.Yang@microchip.com; U-Boot Mailing List u-boot@lists.denx.de Subject: Re: [U-Boot] [PATCH v2 0/8] board: sama5d4: convert boards to support DM/DT
Hi Wenyou,
On 28.10.16 09:16, Wenyou Yang wrote:
The purpose of patch set is to convert the board to support Device Tree and Driver Model.
They are based on the following patches: 1./ [PATCH v3 0/2] pinctrl: at91: Add pinctrl driver http://lists.denx.de/pipermail/u-boot/2016-October/270991.html 2./ [PATCH v1 0/2] ARM: dts: at91: add dts files for the boards of
SAMA5D4
http://lists.denx.de/pipermail/u-boot/2016-October/271004.html 3./ [PATCH v3 0/2] serial: atmel_usart: Support to enable an early debug
UART
http://lists.denx.de/pipermail/u-boot/2016-October/270250.html 4./ [PATCH v1 0/3] gpio: at91_gpio: Add option and clock support http://lists.denx.de/pipermail/u-boot/2016-October/270687.html 5./ [PATCH v10] dm: at91: Add driver model support for the spi driver http://lists.denx.de/pipermail/u-boot/2016-October/270516.html
could you please send this series rebased on current ToT?
Okay, I will rebase it and sent.
Andreas
Changes in v2:
- Restore the wrong removal #define CONFIG_USB_ETHER.
- Update the commit log.
- Restore the wrong removal of USB related code.
- Update the commit log.
- Restore wrong removal of #define CONFIG_USB_ETHER.
- Update the commit log.
- Restore the wrong removal USB related code.
- Update the commit log.
Wenyou Yang (8): configs: at91-sama5_common: fix for CONFIG_AT91_GPIO board: sama5d4_xplained: move config options to defconfig board: sama5d4_xplained: clean up code board: sama5d4_xplained: enable early debug UART board: sama5d4ek: move config options to defconfig board: sama5d4ek: clean up code board: sama5d4ek: enable early debug UART configs: sama5d4: move CONFIG_SYS_NO_FLASH to *defconfig
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 100 ++++------------------- board/atmel/sama5d4ek/sama5d4ek.c | 101 ++++-------------------- configs/sama5d4_xplained_mmc_defconfig | 31 +++++++- configs/sama5d4_xplained_nandflash_defconfig | 33 +++++++- configs/sama5d4_xplained_spiflash_defconfig | 31 +++++++- configs/sama5d4ek_mmc_defconfig | 30 +++++++ configs/sama5d4ek_nandflash_defconfig | 30 +++++++ configs/sama5d4ek_spiflash_defconfig | 30 +++++++ include/configs/at91-sama5_common.h | 2 + include/configs/sama5d4_xplained.h | 28 +------ include/configs/sama5d4ek.h | 29 +------ 11 files changed, 216 insertions(+), 229 deletions(-)
Best Regards, Wenyou Yang
participants (4)
-
Andreas Bießmann -
Andreas Bießmann -
Wenyou Yang -
Wenyou.Yang＠microchip.com