From: Luigi 'Comio' Mantellini luigi.mantellini@idf-hit.com

--- common/cmd_bootm.c | 5 +- include/lzma/LzmaDec.h | 31 + include/lzma/LzmaDecode.h | 31 - include/lzma/LzmaTools.h | 2 +- include/lzma/LzmaTypes.h | 15 +- lib_generic/lzma/LGPL.txt | 502 -------------- lib_generic/lzma/LzmaDec.c | 1007 +++++++++++++++++++++++++++++ lib_generic/lzma/LzmaDec.h | 223 +++++++ lib_generic/lzma/LzmaDecode.c | 584 ----------------- lib_generic/lzma/LzmaDecode.h | 113 ---- lib_generic/lzma/LzmaTools.c | 164 +++--- lib_generic/lzma/LzmaTools.h | 4 +- lib_generic/lzma/LzmaTypes.h | 45 -- lib_generic/lzma/Makefile | 4 +- lib_generic/lzma/README.txt | 8 +- lib_generic/lzma/Types.h | 208 ++++++ lib_generic/lzma/history.txt | 434 +++++++------ lib_generic/lzma/import_lzmasdk.sh | 8 +- lib_generic/lzma/lzma.txt | 1257 +++++++++++++++++------------------- 19 files changed, 2398 insertions(+), 2247 deletions(-) create mode 100644 include/lzma/LzmaDec.h delete mode 100644 include/lzma/LzmaDecode.h delete mode 100644 lib_generic/lzma/LGPL.txt create mode 100644 lib_generic/lzma/LzmaDec.c create mode 100644 lib_generic/lzma/LzmaDec.h delete mode 100644 lib_generic/lzma/LzmaDecode.c delete mode 100644 lib_generic/lzma/LzmaDecode.h delete mode 100644 lib_generic/lzma/LzmaTypes.h create mode 100644 lib_generic/lzma/Types.h

diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 367d5a7..5d5dd33 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -52,9 +52,8 @@ #endif

#ifdef CONFIG_LZMA -#define _7ZIP_BYTE_DEFINED /* Byte already defined by zlib */ #include <lzma/LzmaTypes.h> -#include <lzma/LzmaDecode.h> +#include <lzma/LzmaDec.h> #include <lzma/LzmaTools.h> #endif /* CONFIG_LZMA */

@@ -390,7 +389,7 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress) int ret = lzmaBuffToBuffDecompress( (unsigned char *)load, &unc_len, (unsigned char *)image_start, image_len); - if (ret != LZMA_RESULT_OK) { + if (ret != SZ_OK) { printf ("LZMA: uncompress or overwrite error %d " "- must RESET board to recover\n", ret); show_boot_progress (-6); diff --git a/include/lzma/LzmaDec.h b/include/lzma/LzmaDec.h new file mode 100644 index 0000000..967cdd1 --- /dev/null +++ b/include/lzma/LzmaDec.h @@ -0,0 +1,31 @@ +/* + * Fake include for LzmaDec.h + * + * Copyright (C) 2007-2009 Industrie Dial Face S.p.A. + * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __LZMADEC_H__FAKE__ +#define __LZMADEC_H__FAKE__ + +#include "../../lib_generic/lzma/LzmaDec.h" + +#endif diff --git a/include/lzma/LzmaDecode.h b/include/lzma/LzmaDecode.h deleted file mode 100644 index 8fdb2c0..0000000 --- a/include/lzma/LzmaDecode.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Fake include for LzmaDecode.h - * - * Copyright (C) 2007-2008 Industrie Dial Face S.p.A. - * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __LZMADECODE_H__FAKE__ -#define __LZMADECODE_H__FAKE__ - -#include "../../lib_generic/lzma/LzmaDecode.h" - -#endif diff --git a/include/lzma/LzmaTools.h b/include/lzma/LzmaTools.h index 7c5eea1..87943c0 100644 --- a/include/lzma/LzmaTools.h +++ b/include/lzma/LzmaTools.h @@ -1,7 +1,7 @@ /* * Fake include for LzmaTools.h * - * Copyright (C) 2007-2008 Industrie Dial Face S.p.A. + * Copyright (C) 2007-2009 Industrie Dial Face S.p.A. * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com) * * See file CREDITS for list of people who contributed to this diff --git a/include/lzma/LzmaTypes.h b/include/lzma/LzmaTypes.h index 02daa59..86160a4 100644 --- a/include/lzma/LzmaTypes.h +++ b/include/lzma/LzmaTypes.h @@ -1,7 +1,7 @@ /* - * Fake include for LzmaTypes.h + * Fake include for Types.h * - * Copyright (C) 2007-2008 Industrie Dial Face S.p.A. + * Copyright (C) 2007-2009 Industrie Dial Face S.p.A. * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com) * * See file CREDITS for list of people who contributed to this @@ -23,9 +23,14 @@ * MA 02111-1307 USA */

-#ifndef __LZMATYPES_H__FAKE__ -#define __LZMATYPES_H__FAKE__ +#ifndef __TYPES_H__FAKE__ +#define __TYPES_H__FAKE__

-#include "../../lib_generic/lzma/LzmaTypes.h" +/* + *This avoids the collition with zlib.h Byte definition + */ +#define Byte LZByte + +#include "../../lib_generic/lzma/Types.h"

#endif diff --git a/lib_generic/lzma/LGPL.txt b/lib_generic/lzma/LGPL.txt deleted file mode 100644 index 9e76f5b..0000000 --- a/lib_generic/lzma/LGPL.txt +++ /dev/null @@ -1,502 +0,0 @@ - GNU LESSER GENERAL PUBLIC LICENSE - Version 2.1, February 1999 - - Copyright (C) 1991, 1999 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - -[This is the first released version of the Lesser GPL. It also counts - as the successor of the GNU Library Public License, version 2, hence - the version number 2.1.] - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -Licenses are intended to guarantee your freedom to share and change -free software--to make sure the software is free for all its users. - - This license, the Lesser General Public License, applies to some -specially designated software packages--typically libraries--of the -Free Software Foundation and other authors who decide to use it. You -can use it too, but we suggest you first think carefully about whether -this license or the ordinary General Public License is the better -strategy to use in any particular case, based on the explanations below. - - When we speak of free software, we are referring to freedom of use, -not price. Our General Public Licenses are designed to make sure that -you have the freedom to distribute copies of free software (and charge -for this service if you wish); that you receive source code or can get -it if you want it; that you can change the software and use pieces of -it in new free programs; and that you are informed that you can do -these things. - - To protect your rights, we need to make restrictions that forbid -distributors to deny you these rights or to ask you to surrender these -rights. These restrictions translate to certain responsibilities for -you if you distribute copies of the library or if you modify it. - - For example, if you distribute copies of the library, whether gratis -or for a fee, you must give the recipients all the rights that we gave -you. You must make sure that they, too, receive or can get the source -code. If you link other code with the library, you must provide -complete object files to the recipients, so that they can relink them -with the library after making changes to the library and recompiling -it. And you must show them these terms so they know their rights. - - We protect your rights with a two-step method: (1) we copyright the -library, and (2) we offer you this license, which gives you legal -permission to copy, distribute and/or modify the library. - - To protect each distributor, we want to make it very clear that -there is no warranty for the free library. Also, if the library is -modified by someone else and passed on, the recipients should know -that what they have is not the original version, so that the original -author's reputation will not be affected by problems that might be -introduced by others. - - Finally, software patents pose a constant threat to the existence of -any free program. We wish to make sure that a company cannot -effectively restrict the users of a free program by obtaining a -restrictive license from a patent holder. Therefore, we insist that -any patent license obtained for a version of the library must be -consistent with the full freedom of use specified in this license. - - Most GNU software, including some libraries, is covered by the -ordinary GNU General Public License. This license, the GNU Lesser -General Public License, applies to certain designated libraries, and -is quite different from the ordinary General Public License. We use -this license for certain libraries in order to permit linking those -libraries into non-free programs. - - When a program is linked with a library, whether statically or using -a shared library, the combination of the two is legally speaking a -combined work, a derivative of the original library. The ordinary -General Public License therefore permits such linking only if the -entire combination fits its criteria of freedom. The Lesser General -Public License permits more lax criteria for linking other code with -the library. - - We call this license the "Lesser" General Public License because it -does Less to protect the user's freedom than the ordinary General -Public License. It also provides other free software developers Less -of an advantage over competing non-free programs. These disadvantages -are the reason we use the ordinary General Public License for many -libraries. However, the Lesser license provides advantages in certain -special circumstances. - - For example, on rare occasions, there may be a special need to -encourage the widest possible use of a certain library, so that it becomes -a de-facto standard. To achieve this, non-free programs must be -allowed to use the library. A more frequent case is that a free -library does the same job as widely used non-free libraries. In this -case, there is little to gain by limiting the free library to free -software only, so we use the Lesser General Public License. - - In other cases, permission to use a particular library in non-free -programs enables a greater number of people to use a large body of -free software. For example, permission to use the GNU C Library in -non-free programs enables many more people to use the whole GNU -operating system, as well as its variant, the GNU/Linux operating -system. - - Although the Lesser General Public License is Less protective of the -users' freedom, it does ensure that the user of a program that is -linked with the Library has the freedom and the wherewithal to run -that program using a modified version of the Library. - - The precise terms and conditions for copying, distribution and -modification follow. Pay close attention to the difference between a -"work based on the library" and a "work that uses the library". The -former contains code derived from the library, whereas the latter must -be combined with the library in order to run. - - GNU LESSER GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License Agreement applies to any software library or other -program which contains a notice placed by the copyright holder or -other authorized party saying it may be distributed under the terms of -this Lesser General Public License (also called "this License"). -Each licensee is addressed as "you". - - A "library" means a collection of software functions and/or data -prepared so as to be conveniently linked with application programs -(which use some of those functions and data) to form executables. - - The "Library", below, refers to any such software library or work -which has been distributed under these terms. A "work based on the -Library" means either the Library or any derivative work under -copyright law: that is to say, a work containing the Library or a -portion of it, either verbatim or with modifications and/or translated -straightforwardly into another language. (Hereinafter, translation is -included without limitation in the term "modification".) - - "Source code" for a work means the preferred form of the work for -making modifications to it. For a library, complete source code means -all the source code for all modules it contains, plus any associated -interface definition files, plus the scripts used to control compilation -and installation of the library. - - Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running a program using the Library is not restricted, and output from -such a program is covered only if its contents constitute a work based -on the Library (independent of the use of the Library in a tool for -writing it). Whether that is true depends on what the Library does -and what the program that uses the Library does. - - 1. You may copy and distribute verbatim copies of the Library's -complete source code as you receive it, in any medium, provided that -you conspicuously and appropriately publish on each copy an -appropriate copyright notice and disclaimer of warranty; keep intact -all the notices that refer to this License and to the absence of any -warranty; and distribute a copy of this License along with the -Library. - - You may charge a fee for the physical act of transferring a copy, -and you may at your option offer warranty protection in exchange for a -fee. - - 2. You may modify your copy or copies of the Library or any portion -of it, thus forming a work based on the Library, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) The modified work must itself be a software library. - - b) You must cause the files modified to carry prominent notices - stating that you changed the files and the date of any change. - - c) You must cause the whole of the work to be licensed at no - charge to all third parties under the terms of this License. - - d) If a facility in the modified Library refers to a function or a - table of data to be supplied by an application program that uses - the facility, other than as an argument passed when the facility - is invoked, then you must make a good faith effort to ensure that, - in the event an application does not supply such function or - table, the facility still operates, and performs whatever part of - its purpose remains meaningful. - - (For example, a function in a library to compute square roots has - a purpose that is entirely well-defined independent of the - application. Therefore, Subsection 2d requires that any - application-supplied function or table used by this function must - be optional: if the application does not supply it, the square - root function must still compute square roots.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Library, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Library, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote -it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Library. - -In addition, mere aggregation of another work not based on the Library -with the Library (or with a work based on the Library) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may opt to apply the terms of the ordinary GNU General Public -License instead of this License to a given copy of the Library. To do -this, you must alter all the notices that refer to this License, so -that they refer to the ordinary GNU General Public License, version 2, -instead of to this License. (If a newer version than version 2 of the -ordinary GNU General Public License has appeared, then you can specify -that version instead if you wish.) Do not make any other change in -these notices. - - Once this change is made in a given copy, it is irreversible for -that copy, so the ordinary GNU General Public License applies to all -subsequent copies and derivative works made from that copy. - - This option is useful when you wish to copy part of the code of -the Library into a program that is not a library. - - 4. You may copy and distribute the Library (or a portion or -derivative of it, under Section 2) in object code or executable form -under the terms of Sections 1 and 2 above provided that you accompany -it with the complete corresponding machine-readable source code, which -must be distributed under the terms of Sections 1 and 2 above on a -medium customarily used for software interchange. - - If distribution of object code is made by offering access to copy -from a designated place, then offering equivalent access to copy the -source code from the same place satisfies the requirement to -distribute the source code, even though third parties are not -compelled to copy the source along with the object code. - - 5. A program that contains no derivative of any portion of the -Library, but is designed to work with the Library by being compiled or -linked with it, is called a "work that uses the Library". Such a -work, in isolation, is not a derivative work of the Library, and -therefore falls outside the scope of this License. - - However, linking a "work that uses the Library" with the Library -creates an executable that is a derivative of the Library (because it -contains portions of the Library), rather than a "work that uses the -library". The executable is therefore covered by this License. -Section 6 states terms for distribution of such executables. - - When a "work that uses the Library" uses material from a header file -that is part of the Library, the object code for the work may be a -derivative work of the Library even though the source code is not. -Whether this is true is especially significant if the work can be -linked without the Library, or if the work is itself a library. The -threshold for this to be true is not precisely defined by law. - - If such an object file uses only numerical parameters, data -structure layouts and accessors, and small macros and small inline -functions (ten lines or less in length), then the use of the object -file is unrestricted, regardless of whether it is legally a derivative -work. (Executables containing this object code plus portions of the -Library will still fall under Section 6.) - - Otherwise, if the work is a derivative of the Library, you may -distribute the object code for the work under the terms of Section 6. -Any executables containing that work also fall under Section 6, -whether or not they are linked directly with the Library itself. - - 6. As an exception to the Sections above, you may also combine or -link a "work that uses the Library" with the Library to produce a -work containing portions of the Library, and distribute that work -under terms of your choice, provided that the terms permit -modification of the work for the customer's own use and reverse -engineering for debugging such modifications. - - You must give prominent notice with each copy of the work that the -Library is used in it and that the Library and its use are covered by -this License. You must supply a copy of this License. If the work -during execution displays copyright notices, you must include the -copyright notice for the Library among them, as well as a reference -directing the user to the copy of this License. Also, you must do one -of these things: - - a) Accompany the work with the complete corresponding - machine-readable source code for the Library including whatever - changes were used in the work (which must be distributed under - Sections 1 and 2 above); and, if the work is an executable linked - with the Library, with the complete machine-readable "work that - uses the Library", as object code and/or source code, so that the - user can modify the Library and then relink to produce a modified - executable containing the modified Library. (It is understood - that the user who changes the contents of definitions files in the - Library will not necessarily be able to recompile the application - to use the modified definitions.) - - b) Use a suitable shared library mechanism for linking with the - Library. A suitable mechanism is one that (1) uses at run time a - copy of the library already present on the user's computer system, - rather than copying library functions into the executable, and (2) - will operate properly with a modified version of the library, if - the user installs one, as long as the modified version is - interface-compatible with the version that the work was made with. - - c) Accompany the work with a written offer, valid for at - least three years, to give the same user the materials - specified in Subsection 6a, above, for a charge no more - than the cost of performing this distribution. - - d) If distribution of the work is made by offering access to copy - from a designated place, offer equivalent access to copy the above - specified materials from the same place. - - e) Verify that the user has already received a copy of these - materials or that you have already sent this user a copy. - - For an executable, the required form of the "work that uses the -Library" must include any data and utility programs needed for -reproducing the executable from it. However, as a special exception, -the materials to be distributed need not include anything that is -normally distributed (in either source or binary form) with the major -components (compiler, kernel, and so on) of the operating system on -which the executable runs, unless that component itself accompanies -the executable. - - It may happen that this requirement contradicts the license -restrictions of other proprietary libraries that do not normally -accompany the operating system. Such a contradiction means you cannot -use both them and the Library together in an executable that you -distribute. - - 7. You may place library facilities that are a work based on the -Library side-by-side in a single library together with other library -facilities not covered by this License, and distribute such a combined -library, provided that the separate distribution of the work based on -the Library and of the other library facilities is otherwise -permitted, and provided that you do these two things: - - a) Accompany the combined library with a copy of the same work - based on the Library, uncombined with any other library - facilities. This must be distributed under the terms of the - Sections above. - - b) Give prominent notice with the combined library of the fact - that part of it is a work based on the Library, and explaining - where to find the accompanying uncombined form of the same work. - - 8. You may not copy, modify, sublicense, link with, or distribute -the Library except as expressly provided under this License. Any -attempt otherwise to copy, modify, sublicense, link with, or -distribute the Library is void, and will automatically terminate your -rights under this License. However, parties who have received copies, -or rights, from you under this License will not have their licenses -terminated so long as such parties remain in full compliance. - - 9. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Library or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Library (or any work based on the -Library), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Library or works based on it. - - 10. Each time you redistribute the Library (or any work based on the -Library), the recipient automatically receives a license from the -original licensor to copy, distribute, link with or modify the Library -subject to these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties with -this License. - - 11. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Library at all. For example, if a patent -license would not permit royalty-free redistribution of the Library by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Library. - -If any portion of this section is held invalid or unenforceable under any -particular circumstance, the balance of the section is intended to apply, -and the section as a whole is intended to apply in other circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 12. If the distribution and/or use of the Library is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Library under this License may add -an explicit geographical distribution limitation excluding those countries, -so that distribution is permitted only in or among countries not thus -excluded. In such case, this License incorporates the limitation as if -written in the body of this License. - - 13. The Free Software Foundation may publish revised and/or new -versions of the Lesser General Public License from time to time. -Such new versions will be similar in spirit to the present version, -but may differ in detail to address new problems or concerns. - -Each version is given a distinguishing version number. If the Library -specifies a version number of this License which applies to it and -"any later version", you have the option of following the terms and -conditions either of that version or of any later version published by -the Free Software Foundation. If the Library does not specify a -license version number, you may choose any version ever published by -the Free Software Foundation. - - 14. If you wish to incorporate parts of the Library into other free -programs whose distribution conditions are incompatible with these, -write to the author to ask for permission. For software which is -copyrighted by the Free Software Foundation, write to the Free -Software Foundation; we sometimes make exceptions for this. Our -decision will be guided by the two goals of preserving the free status -of all derivatives of our free software and of promoting the sharing -and reuse of software generally. - - NO WARRANTY - - 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO -WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. -EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR -OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY -KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE -LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME -THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN -WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY -AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU -FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR -CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE -LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING -RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A -FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF -SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH -DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Libraries - - If you develop a new library, and you want it to be of the greatest -possible use to the public, we recommend making it free software that -everyone can redistribute and change. You can do so by permitting -redistribution under these terms (or, alternatively, under the terms of the -ordinary General Public License). - - To apply these terms, attach the following notices to the library. It is -safest to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least the -"copyright" line and a pointer to where the full notice is found. - - <one line to give the library's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - -Also add information on how to contact you by electronic and paper mail. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the library, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the - library `Frob' (a library for tweaking knobs) written by James Random Hacker. - - <signature of Ty Coon>, 1 April 1990 - Ty Coon, President of Vice - -That's all there is to it! diff --git a/lib_generic/lzma/LzmaDec.c b/lib_generic/lzma/LzmaDec.c new file mode 100644 index 0000000..eb52501 --- /dev/null +++ b/lib_generic/lzma/LzmaDec.c @@ -0,0 +1,1007 @@ +/* LzmaDec.c -- LZMA Decoder +2008-11-06 : Igor Pavlov : Public domain */ + +#include "LzmaDec.h" + +#include <string.h> + +#define kNumTopBits 24 +#define kTopValue ((UInt32)1 << kNumTopBits) + +#define kNumBitModelTotalBits 11 +#define kBitModelTotal (1 << kNumBitModelTotalBits) +#define kNumMoveBits 5 + +#define RC_INIT_SIZE 5 + +#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); } + +#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound) +#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits)); +#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits)); +#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \ + { UPDATE_0(p); i = (i + i); A0; } else \ + { UPDATE_1(p); i = (i + i) + 1; A1; } +#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;) + +#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); } +#define TREE_DECODE(probs, limit, i) \ + { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; } + +/* #define _LZMA_SIZE_OPT */ + +#ifdef _LZMA_SIZE_OPT +#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i) +#else +#define TREE_6_DECODE(probs, i) \ + { i = 1; \ + TREE_GET_BIT(probs, i); \ + TREE_GET_BIT(probs, i); \ + TREE_GET_BIT(probs, i); \ + TREE_GET_BIT(probs, i); \ + TREE_GET_BIT(probs, i); \ + TREE_GET_BIT(probs, i); \ + i -= 0x40; } +#endif + +#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); } + +#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound) +#define UPDATE_0_CHECK range = bound; +#define UPDATE_1_CHECK range -= bound; code -= bound; +#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \ + { UPDATE_0_CHECK; i = (i + i); A0; } else \ + { UPDATE_1_CHECK; i = (i + i) + 1; A1; } +#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;) +#define TREE_DECODE_CHECK(probs, limit, i) \ + { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; } + + +#define kNumPosBitsMax 4 +#define kNumPosStatesMax (1 << kNumPosBitsMax) + +#define kLenNumLowBits 3 +#define kLenNumLowSymbols (1 << kLenNumLowBits) +#define kLenNumMidBits 3 +#define kLenNumMidSymbols (1 << kLenNumMidBits) +#define kLenNumHighBits 8 +#define kLenNumHighSymbols (1 << kLenNumHighBits) + +#define LenChoice 0 +#define LenChoice2 (LenChoice + 1) +#define LenLow (LenChoice2 + 1) +#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) +#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) +#define kNumLenProbs (LenHigh + kLenNumHighSymbols) + + +#define kNumStates 12 +#define kNumLitStates 7 + +#define kStartPosModelIndex 4 +#define kEndPosModelIndex 14 +#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) + +#define kNumPosSlotBits 6 +#define kNumLenToPosStates 4 + +#define kNumAlignBits 4 +#define kAlignTableSize (1 << kNumAlignBits) + +#define kMatchMinLen 2 +#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols) + +#define IsMatch 0 +#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) +#define IsRepG0 (IsRep + kNumStates) +#define IsRepG1 (IsRepG0 + kNumStates) +#define IsRepG2 (IsRepG1 + kNumStates) +#define IsRep0Long (IsRepG2 + kNumStates) +#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) +#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) +#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) +#define LenCoder (Align + kAlignTableSize) +#define RepLenCoder (LenCoder + kNumLenProbs) +#define Literal (RepLenCoder + kNumLenProbs) + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp))) + +#if Literal != LZMA_BASE_SIZE +StopCompilingDueBUG +#endif + +static const Byte kLiteralNextStates[kNumStates * 2] = +{ + 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5, + 7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10 +}; + +#define LZMA_DIC_MIN (1 << 12) + +/* First LZMA-symbol is always decoded. +And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization +Out: + Result: + SZ_OK - OK + SZ_ERROR_DATA - Error + p->remainLen: + < kMatchSpecLenStart : normal remain + = kMatchSpecLenStart : finished + = kMatchSpecLenStart + 1 : Flush marker + = kMatchSpecLenStart + 2 : State Init Marker +*/ + +static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit) +{ + CLzmaProb *probs = p->probs; + + unsigned state = p->state; + UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3]; + unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1; + unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1; + unsigned lc = p->prop.lc; + + Byte *dic = p->dic; + SizeT dicBufSize = p->dicBufSize; + SizeT dicPos = p->dicPos; + + UInt32 processedPos = p->processedPos; + UInt32 checkDicSize = p->checkDicSize; + unsigned len = 0; + + const Byte *buf = p->buf; + UInt32 range = p->range; + UInt32 code = p->code; + + do + { + CLzmaProb *prob; + UInt32 bound; + unsigned ttt; + unsigned posState = processedPos & pbMask; + + prob = probs + IsMatch + (state << kNumPosBitsMax) + posState; + IF_BIT_0(prob) + { + unsigned symbol; + UPDATE_0(prob); + prob = probs + Literal; + if (checkDicSize != 0 || processedPos != 0) + prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) + + (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc)))); + + if (state < kNumLitStates) + { + symbol = 1; + do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100); + } + else + { + unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; + unsigned offs = 0x100; + symbol = 1; + do + { + unsigned bit; + CLzmaProb *probLit; + matchByte <<= 1; + bit = (matchByte & offs); + probLit = prob + offs + bit + symbol; + GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit) + } + while (symbol < 0x100); + } + dic[dicPos++] = (Byte)symbol; + processedPos++; + + state = kLiteralNextStates[state]; + /* if (state < 4) state = 0; else if (state < 10) state -= 3; else state -= 6; */ + continue; + } + else + { + UPDATE_1(prob); + prob = probs + IsRep + state; + IF_BIT_0(prob) + { + UPDATE_0(prob); + state += kNumStates; + prob = probs + LenCoder; + } + else + { + UPDATE_1(prob); + if (checkDicSize == 0 && processedPos == 0) + return SZ_ERROR_DATA; + prob = probs + IsRepG0 + state; + IF_BIT_0(prob) + { + UPDATE_0(prob); + prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState; + IF_BIT_0(prob) + { + UPDATE_0(prob); + dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; + dicPos++; + processedPos++; + state = state < kNumLitStates ? 9 : 11; + continue; + } + UPDATE_1(prob); + } + else + { + UInt32 distance; + UPDATE_1(prob); + prob = probs + IsRepG1 + state; + IF_BIT_0(prob) + { + UPDATE_0(prob); + distance = rep1; + } + else + { + UPDATE_1(prob); + prob = probs + IsRepG2 + state; + IF_BIT_0(prob) + { + UPDATE_0(prob); + distance = rep2; + } + else + { + UPDATE_1(prob); + distance = rep3; + rep3 = rep2; + } + rep2 = rep1; + } + rep1 = rep0; + rep0 = distance; + } + state = state < kNumLitStates ? 8 : 11; + prob = probs + RepLenCoder; + } + { + unsigned limit, offset; + CLzmaProb *probLen = prob + LenChoice; + IF_BIT_0(probLen) + { + UPDATE_0(probLen); + probLen = prob + LenLow + (posState << kLenNumLowBits); + offset = 0; + limit = (1 << kLenNumLowBits); + } + else + { + UPDATE_1(probLen); + probLen = prob + LenChoice2; + IF_BIT_0(probLen) + { + UPDATE_0(probLen); + probLen = prob + LenMid + (posState << kLenNumMidBits); + offset = kLenNumLowSymbols; + limit = (1 << kLenNumMidBits); + } + else + { + UPDATE_1(probLen); + probLen = prob + LenHigh; + offset = kLenNumLowSymbols + kLenNumMidSymbols; + limit = (1 << kLenNumHighBits); + } + } + TREE_DECODE(probLen, limit, len); + len += offset; + } + + if (state >= kNumStates) + { + UInt32 distance; + prob = probs + PosSlot + + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits); + TREE_6_DECODE(prob, distance); + if (distance >= kStartPosModelIndex) + { + unsigned posSlot = (unsigned)distance; + int numDirectBits = (int)(((distance >> 1) - 1)); + distance = (2 | (distance & 1)); + if (posSlot < kEndPosModelIndex) + { + distance <<= numDirectBits; + prob = probs + SpecPos + distance - posSlot - 1; + { + UInt32 mask = 1; + unsigned i = 1; + do + { + GET_BIT2(prob + i, i, ; , distance |= mask); + mask <<= 1; + } + while (--numDirectBits != 0); + } + } + else + { + numDirectBits -= kNumAlignBits; + do + { + NORMALIZE + range >>= 1; + + { + UInt32 t; + code -= range; + t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */ + distance = (distance << 1) + (t + 1); + code += range & t; + } + /* + distance <<= 1; + if (code >= range) + { + code -= range; + distance |= 1; + } + */ + } + while (--numDirectBits != 0); + prob = probs + Align; + distance <<= kNumAlignBits; + { + unsigned i = 1; + GET_BIT2(prob + i, i, ; , distance |= 1); + GET_BIT2(prob + i, i, ; , distance |= 2); + GET_BIT2(prob + i, i, ; , distance |= 4); + GET_BIT2(prob + i, i, ; , distance |= 8); + } + if (distance == (UInt32)0xFFFFFFFF) + { + len += kMatchSpecLenStart; + state -= kNumStates; + break; + } + } + } + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + rep0 = distance + 1; + if (checkDicSize == 0) + { + if (distance >= processedPos) + return SZ_ERROR_DATA; + } + else if (distance >= checkDicSize) + return SZ_ERROR_DATA; + state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3; + /* state = kLiteralNextStates[state]; */ + } + + len += kMatchMinLen; + + if (limit == dicPos) + return SZ_ERROR_DATA; + { + SizeT rem = limit - dicPos; + unsigned curLen = ((rem < len) ? (unsigned)rem : len); + SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0); + + processedPos += curLen; + + len -= curLen; + if (pos + curLen <= dicBufSize) + { + Byte *dest = dic + dicPos; + ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos; + const Byte *lim = dest + curLen; + dicPos += curLen; + do + *(dest) = (Byte)*(dest + src); + while (++dest != lim); + } + else + { + do + { + dic[dicPos++] = dic[pos]; + if (++pos == dicBufSize) + pos = 0; + } + while (--curLen != 0); + } + } + } + } + while (dicPos < limit && buf < bufLimit); + NORMALIZE; + p->buf = buf; + p->range = range; + p->code = code; + p->remainLen = len; + p->dicPos = dicPos; + p->processedPos = processedPos; + p->reps[0] = rep0; + p->reps[1] = rep1; + p->reps[2] = rep2; + p->reps[3] = rep3; + p->state = state; + + return SZ_OK; +} + +static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit) +{ + if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart) + { + Byte *dic = p->dic; + SizeT dicPos = p->dicPos; + SizeT dicBufSize = p->dicBufSize; + unsigned len = p->remainLen; + UInt32 rep0 = p->reps[0]; + if (limit - dicPos < len) + len = (unsigned)(limit - dicPos); + + if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len) + p->checkDicSize = p->prop.dicSize; + + p->processedPos += len; + p->remainLen -= len; + while (len-- != 0) + { + dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; + dicPos++; + } + p->dicPos = dicPos; + } +} + +static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit) +{ + do + { + SizeT limit2 = limit; + if (p->checkDicSize == 0) + { + UInt32 rem = p->prop.dicSize - p->processedPos; + if (limit - p->dicPos > rem) + limit2 = p->dicPos + rem; + } + RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit)); + if (p->processedPos >= p->prop.dicSize) + p->checkDicSize = p->prop.dicSize; + LzmaDec_WriteRem(p, limit); + } + while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart); + + if (p->remainLen > kMatchSpecLenStart) + { + p->remainLen = kMatchSpecLenStart; + } + return 0; +} + +typedef enum +{ + DUMMY_ERROR, /* unexpected end of input stream */ + DUMMY_LIT, + DUMMY_MATCH, + DUMMY_REP +} ELzmaDummy; + +static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize) +{ + UInt32 range = p->range; + UInt32 code = p->code; + const Byte *bufLimit = buf + inSize; + CLzmaProb *probs = p->probs; + unsigned state = p->state; + ELzmaDummy res; + + { + CLzmaProb *prob; + UInt32 bound; + unsigned ttt; + unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1); + + prob = probs + IsMatch + (state << kNumPosBitsMax) + posState; + IF_BIT_0_CHECK(prob) + { + UPDATE_0_CHECK + + /* if (bufLimit - buf >= 7) return DUMMY_LIT; */ + + prob = probs + Literal; + if (p->checkDicSize != 0 || p->processedPos != 0) + prob += (LZMA_LIT_SIZE * + ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) + + (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc)))); + + if (state < kNumLitStates) + { + unsigned symbol = 1; + do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100); + } + else + { + unsigned matchByte = p->dic[p->dicPos - p->reps[0] + + ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)]; + unsigned offs = 0x100; + unsigned symbol = 1; + do + { + unsigned bit; + CLzmaProb *probLit; + matchByte <<= 1; + bit = (matchByte & offs); + probLit = prob + offs + bit + symbol; + GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit) + } + while (symbol < 0x100); + } + res = DUMMY_LIT; + } + else + { + unsigned len; + UPDATE_1_CHECK; + + prob = probs + IsRep + state; + IF_BIT_0_CHECK(prob) + { + UPDATE_0_CHECK; + state = 0; + prob = probs + LenCoder; + res = DUMMY_MATCH; + } + else + { + UPDATE_1_CHECK; + res = DUMMY_REP; + prob = probs + IsRepG0 + state; + IF_BIT_0_CHECK(prob) + { + UPDATE_0_CHECK; + prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState; + IF_BIT_0_CHECK(prob) + { + UPDATE_0_CHECK; + NORMALIZE_CHECK; + return DUMMY_REP; + } + else + { + UPDATE_1_CHECK; + } + } + else + { + UPDATE_1_CHECK; + prob = probs + IsRepG1 + state; + IF_BIT_0_CHECK(prob) + { + UPDATE_0_CHECK; + } + else + { + UPDATE_1_CHECK; + prob = probs + IsRepG2 + state; + IF_BIT_0_CHECK(prob) + { + UPDATE_0_CHECK; + } + else + { + UPDATE_1_CHECK; + } + } + } + state = kNumStates; + prob = probs + RepLenCoder; + } + { + unsigned limit, offset; + CLzmaProb *probLen = prob + LenChoice; + IF_BIT_0_CHECK(probLen) + { + UPDATE_0_CHECK; + probLen = prob + LenLow + (posState << kLenNumLowBits); + offset = 0; + limit = 1 << kLenNumLowBits; + } + else + { + UPDATE_1_CHECK; + probLen = prob + LenChoice2; + IF_BIT_0_CHECK(probLen) + { + UPDATE_0_CHECK; + probLen = prob + LenMid + (posState << kLenNumMidBits); + offset = kLenNumLowSymbols; + limit = 1 << kLenNumMidBits; + } + else + { + UPDATE_1_CHECK; + probLen = prob + LenHigh; + offset = kLenNumLowSymbols + kLenNumMidSymbols; + limit = 1 << kLenNumHighBits; + } + } + TREE_DECODE_CHECK(probLen, limit, len); + len += offset; + } + + if (state < 4) + { + unsigned posSlot; + prob = probs + PosSlot + + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << + kNumPosSlotBits); + TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot); + if (posSlot >= kStartPosModelIndex) + { + int numDirectBits = ((posSlot >> 1) - 1); + + /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */ + + if (posSlot < kEndPosModelIndex) + { + prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1; + } + else + { + numDirectBits -= kNumAlignBits; + do + { + NORMALIZE_CHECK + range >>= 1; + code -= range & (((code - range) >> 31) - 1); + /* if (code >= range) code -= range; */ + } + while (--numDirectBits != 0); + prob = probs + Align; + numDirectBits = kNumAlignBits; + } + { + unsigned i = 1; + do + { + GET_BIT_CHECK(prob + i, i); + } + while (--numDirectBits != 0); + } + } + } + } + } + NORMALIZE_CHECK; + return res; +} + + +static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data) +{ + p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]); + p->range = 0xFFFFFFFF; + p->needFlush = 0; +} + +void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) +{ + p->needFlush = 1; + p->remainLen = 0; + p->tempBufSize = 0; + + if (initDic) + { + p->processedPos = 0; + p->checkDicSize = 0; + p->needInitState = 1; + } + if (initState) + p->needInitState = 1; +} + +void LzmaDec_Init(CLzmaDec *p) +{ + p->dicPos = 0; + LzmaDec_InitDicAndState(p, True, True); +} + +static void LzmaDec_InitStateReal(CLzmaDec *p) +{ + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp)); + UInt32 i; + CLzmaProb *probs = p->probs; + for (i = 0; i < numProbs; i++) + probs[i] = kBitModelTotal >> 1; + p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1; + p->state = 0; + p->needInitState = 0; +} + +SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, + ELzmaFinishMode finishMode, ELzmaStatus *status) +{ + SizeT inSize = *srcLen; + (*srcLen) = 0; + LzmaDec_WriteRem(p, dicLimit); + + *status = LZMA_STATUS_NOT_SPECIFIED; + + while (p->remainLen != kMatchSpecLenStart) + { + int checkEndMarkNow; + + if (p->needFlush != 0) + { + for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--) + p->tempBuf[p->tempBufSize++] = *src++; + if (p->tempBufSize < RC_INIT_SIZE) + { + *status = LZMA_STATUS_NEEDS_MORE_INPUT; + return SZ_OK; + } + if (p->tempBuf[0] != 0) + return SZ_ERROR_DATA; + + LzmaDec_InitRc(p, p->tempBuf); + p->tempBufSize = 0; + } + + checkEndMarkNow = 0; + if (p->dicPos >= dicLimit) + { + if (p->remainLen == 0 && p->code == 0) + { + *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK; + return SZ_OK; + } + if (finishMode == LZMA_FINISH_ANY) + { + *status = LZMA_STATUS_NOT_FINISHED; + return SZ_OK; + } + if (p->remainLen != 0) + { + *status = LZMA_STATUS_NOT_FINISHED; + return SZ_ERROR_DATA; + } + checkEndMarkNow = 1; + } + + if (p->needInitState) + LzmaDec_InitStateReal(p); + + if (p->tempBufSize == 0) + { + SizeT processed; + const Byte *bufLimit; + if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow) + { + int dummyRes = LzmaDec_TryDummy(p, src, inSize); + if (dummyRes == DUMMY_ERROR) + { + memcpy(p->tempBuf, src, inSize); + p->tempBufSize = (unsigned)inSize; + (*srcLen) += inSize; + *status = LZMA_STATUS_NEEDS_MORE_INPUT; + return SZ_OK; + } + if (checkEndMarkNow && dummyRes != DUMMY_MATCH) + { + *status = LZMA_STATUS_NOT_FINISHED; + return SZ_ERROR_DATA; + } + bufLimit = src; + } + else + bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX; + p->buf = src; + if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0) + return SZ_ERROR_DATA; + processed = (SizeT)(p->buf - src); + (*srcLen) += processed; + src += processed; + inSize -= processed; + } + else + { + unsigned rem = p->tempBufSize, lookAhead = 0; + while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize) + p->tempBuf[rem++] = src[lookAhead++]; + p->tempBufSize = rem; + if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow) + { + int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem); + if (dummyRes == DUMMY_ERROR) + { + (*srcLen) += lookAhead; + *status = LZMA_STATUS_NEEDS_MORE_INPUT; + return SZ_OK; + } + if (checkEndMarkNow && dummyRes != DUMMY_MATCH) + { + *status = LZMA_STATUS_NOT_FINISHED; + return SZ_ERROR_DATA; + } + } + p->buf = p->tempBuf; + if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0) + return SZ_ERROR_DATA; + lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf)); + (*srcLen) += lookAhead; + src += lookAhead; + inSize -= lookAhead; + p->tempBufSize = 0; + } + } + if (p->code == 0) + *status = LZMA_STATUS_FINISHED_WITH_MARK; + return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA; +} + +SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status) +{ + SizeT outSize = *destLen; + SizeT inSize = *srcLen; + *srcLen = *destLen = 0; + for (;;) + { + SizeT inSizeCur = inSize, outSizeCur, dicPos; + ELzmaFinishMode curFinishMode; + SRes res; + if (p->dicPos == p->dicBufSize) + p->dicPos = 0; + dicPos = p->dicPos; + if (outSize > p->dicBufSize - dicPos) + { + outSizeCur = p->dicBufSize; + curFinishMode = LZMA_FINISH_ANY; + } + else + { + outSizeCur = dicPos + outSize; + curFinishMode = finishMode; + } + + res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status); + src += inSizeCur; + inSize -= inSizeCur; + *srcLen += inSizeCur; + outSizeCur = p->dicPos - dicPos; + memcpy(dest, p->dic + dicPos, outSizeCur); + dest += outSizeCur; + outSize -= outSizeCur; + *destLen += outSizeCur; + if (res != 0) + return res; + if (outSizeCur == 0 || outSize == 0) + return SZ_OK; + } +} + +void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) +{ + alloc->Free(alloc, p->probs); + p->probs = 0; +} + +static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc) +{ + alloc->Free(alloc, p->dic); + p->dic = 0; +} + +void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc) +{ + LzmaDec_FreeProbs(p, alloc); + LzmaDec_FreeDict(p, alloc); +} + +SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) +{ + UInt32 dicSize; + Byte d; + + if (size < LZMA_PROPS_SIZE) + return SZ_ERROR_UNSUPPORTED; + else + dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24); + + if (dicSize < LZMA_DIC_MIN) + dicSize = LZMA_DIC_MIN; + p->dicSize = dicSize; + + d = data[0]; + if (d >= (9 * 5 * 5)) + return SZ_ERROR_UNSUPPORTED; + + p->lc = d % 9; + d /= 9; + p->pb = d / 5; + p->lp = d % 5; + + return SZ_OK; +} + +static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc) +{ + UInt32 numProbs = LzmaProps_GetNumProbs(propNew); + if (p->probs == 0 || numProbs != p->numProbs) + { + LzmaDec_FreeProbs(p, alloc); + p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb)); + p->numProbs = numProbs; + if (p->probs == 0) + return SZ_ERROR_MEM; + } + return SZ_OK; +} + +SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) +{ + CLzmaProps propNew; + RINOK(LzmaProps_Decode(&propNew, props, propsSize)); + RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); + p->prop = propNew; + return SZ_OK; +} + +SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) +{ + CLzmaProps propNew; + SizeT dicBufSize; + RINOK(LzmaProps_Decode(&propNew, props, propsSize)); + RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); + dicBufSize = propNew.dicSize; + if (p->dic == 0 || dicBufSize != p->dicBufSize) + { + LzmaDec_FreeDict(p, alloc); + p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize); + if (p->dic == 0) + { + LzmaDec_FreeProbs(p, alloc); + return SZ_ERROR_MEM; + } + } + p->dicBufSize = dicBufSize; + p->prop = propNew; + return SZ_OK; +} + +SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, + const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, + ELzmaStatus *status, ISzAlloc *alloc) +{ + CLzmaDec p; + SRes res; + SizeT inSize = *srcLen; + SizeT outSize = *destLen; + *srcLen = *destLen = 0; + if (inSize < RC_INIT_SIZE) + return SZ_ERROR_INPUT_EOF; + + LzmaDec_Construct(&p); + res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc); + if (res != 0) + return res; + p.dic = dest; + p.dicBufSize = outSize; + + LzmaDec_Init(&p); + + *srcLen = inSize; + res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status); + + if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT) + res = SZ_ERROR_INPUT_EOF; + + (*destLen) = p.dicPos; + LzmaDec_FreeProbs(&p, alloc); + return res; +} diff --git a/lib_generic/lzma/LzmaDec.h b/lib_generic/lzma/LzmaDec.h new file mode 100644 index 0000000..ad7d705 --- /dev/null +++ b/lib_generic/lzma/LzmaDec.h @@ -0,0 +1,223 @@ +/* LzmaDec.h -- LZMA Decoder +2008-10-04 : Igor Pavlov : Public domain */ + +#ifndef __LZMADEC_H +#define __LZMADEC_H + +#include "Types.h" + +/* #define _LZMA_PROB32 */ +/* _LZMA_PROB32 can increase the speed on some CPUs, + but memory usage for CLzmaDec::probs will be doubled in that case */ + +#ifdef _LZMA_PROB32 +#define CLzmaProb UInt32 +#else +#define CLzmaProb UInt16 +#endif + + +/* ---------- LZMA Properties ---------- */ + +#define LZMA_PROPS_SIZE 5 + +typedef struct _CLzmaProps +{ + unsigned lc, lp, pb; + UInt32 dicSize; +} CLzmaProps; + +/* LzmaProps_Decode - decodes properties +Returns: + SZ_OK + SZ_ERROR_UNSUPPORTED - Unsupported properties +*/ + +SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); + + +/* ---------- LZMA Decoder state ---------- */ + +/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case. + Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */ + +#define LZMA_REQUIRED_INPUT_MAX 20 + +typedef struct +{ + CLzmaProps prop; + CLzmaProb *probs; + Byte *dic; + const Byte *buf; + UInt32 range, code; + SizeT dicPos; + SizeT dicBufSize; + UInt32 processedPos; + UInt32 checkDicSize; + unsigned state; + UInt32 reps[4]; + unsigned remainLen; + int needFlush; + int needInitState; + UInt32 numProbs; + unsigned tempBufSize; + Byte tempBuf[LZMA_REQUIRED_INPUT_MAX]; +} CLzmaDec; + +#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; } + +void LzmaDec_Init(CLzmaDec *p); + +/* There are two types of LZMA streams: + 0) Stream with end mark. That end mark adds about 6 bytes to compressed size. + 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */ + +typedef enum +{ + LZMA_FINISH_ANY, /* finish at any point */ + LZMA_FINISH_END /* block must be finished at the end */ +} ELzmaFinishMode; + +/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!! + + You must use LZMA_FINISH_END, when you know that current output buffer + covers last bytes of block. In other cases you must use LZMA_FINISH_ANY. + + If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK, + and output value of destLen will be less than output buffer size limit. + You can check status result also. + + You can use multiple checks to test data integrity after full decompression: + 1) Check Result and "status" variable. + 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize. + 3) Check that output(srcLen) = compressedSize, if you know real compressedSize. + You must use correct finish mode in that case. */ + +typedef enum +{ + LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */ + LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */ + LZMA_STATUS_NOT_FINISHED, /* stream was not finished */ + LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */ + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */ +} ELzmaStatus; + +/* ELzmaStatus is used only as output value for function call */ + + +/* ---------- Interfaces ---------- */ + +/* There are 3 levels of interfaces: + 1) Dictionary Interface + 2) Buffer Interface + 3) One Call Interface + You can select any of these interfaces, but don't mix functions from different + groups for same object. */ + + +/* There are two variants to allocate state for Dictionary Interface: + 1) LzmaDec_Allocate / LzmaDec_Free + 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs + You can use variant 2, if you set dictionary buffer manually. + For Buffer Interface you must always use variant 1. + +LzmaDec_Allocate* can return: + SZ_OK + SZ_ERROR_MEM - Memory allocation error + SZ_ERROR_UNSUPPORTED - Unsupported properties +*/ + +SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc); +void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc); + +SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc); +void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc); + +/* ---------- Dictionary Interface ---------- */ + +/* You can use it, if you want to eliminate the overhead for data copying from + dictionary to some other external buffer. + You must work with CLzmaDec variables directly in this interface. + + STEPS: + LzmaDec_Constr() + LzmaDec_Allocate() + for (each new stream) + { + LzmaDec_Init() + while (it needs more decompression) + { + LzmaDec_DecodeToDic() + use data from CLzmaDec::dic and update CLzmaDec::dicPos + } + } + LzmaDec_Free() +*/ + +/* LzmaDec_DecodeToDic + + The decoding to internal dictionary buffer (CLzmaDec::dic). + You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! + +finishMode: + It has meaning only if the decoding reaches output limit (dicLimit). + LZMA_FINISH_ANY - Decode just dicLimit bytes. + LZMA_FINISH_END - Stream must be finished after dicLimit. + +Returns: + SZ_OK + status: + LZMA_STATUS_FINISHED_WITH_MARK + LZMA_STATUS_NOT_FINISHED + LZMA_STATUS_NEEDS_MORE_INPUT + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK + SZ_ERROR_DATA - Data error +*/ + +SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, + const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); + + +/* ---------- Buffer Interface ---------- */ + +/* It's zlib-like interface. + See LzmaDec_DecodeToDic description for information about STEPS and return results, + but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need + to work with CLzmaDec variables manually. + +finishMode: + It has meaning only if the decoding reaches output limit (*destLen). + LZMA_FINISH_ANY - Decode just destLen bytes. + LZMA_FINISH_END - Stream must be finished after (*destLen). +*/ + +SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, + const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); + + +/* ---------- One Call Interface ---------- */ + +/* LzmaDecode + +finishMode: + It has meaning only if the decoding reaches output limit (*destLen). + LZMA_FINISH_ANY - Decode just destLen bytes. + LZMA_FINISH_END - Stream must be finished after (*destLen). + +Returns: + SZ_OK + status: + LZMA_STATUS_FINISHED_WITH_MARK + LZMA_STATUS_NOT_FINISHED + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK + SZ_ERROR_DATA - Data error + SZ_ERROR_MEM - Memory allocation error + SZ_ERROR_UNSUPPORTED - Unsupported properties + SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src). +*/ + +SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, + const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, + ELzmaStatus *status, ISzAlloc *alloc); + +#endif diff --git a/lib_generic/lzma/LzmaDecode.c b/lib_generic/lzma/LzmaDecode.c deleted file mode 100644 index 3470e55..0000000 --- a/lib_generic/lzma/LzmaDecode.c +++ /dev/null @@ -1,584 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - -#ifdef _LZMA_IN_CB - -#define RC_TEST { if (Buffer == BufferLim) \ - { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ - BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} - -#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 - -#else - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - -#endif - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - #ifdef _LZMA_OUT_READ - { - int i; - propsRes->DictionarySize = 0; - for (i = 0; i < 4; i++) - propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8); - if (propsRes->DictionarySize == 0) - propsRes->DictionarySize = 1; - } - #endif - return LZMA_RESULT_OK; -} - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - #ifdef _LZMA_OUT_READ - - UInt32 Range = vs->Range; - UInt32 Code = vs->Code; - #ifdef _LZMA_IN_CB - const Byte *Buffer = vs->Buffer; - const Byte *BufferLim = vs->BufferLim; - #else - const Byte *Buffer = inStream; - const Byte *BufferLim = inStream + inSize; - #endif - int state = vs->State; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - UInt32 distanceLimit = vs->DistanceLimit; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->Properties.DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - Byte tempDictionary[4]; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - if (len == kLzmaStreamWasFinishedId) - return LZMA_RESULT_OK; - - if (dictionarySize == 0) - { - dictionary = tempDictionary; - dictionarySize = 1; - tempDictionary[0] = vs->TempDictionary[0]; - } - - if (len == kLzmaNeedInitId) - { - { - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - UInt32 i; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - rep0 = rep1 = rep2 = rep3 = 1; - state = 0; - globalPos = 0; - distanceLimit = 0; - dictionaryPos = 0; - dictionary[dictionarySize - 1] = 0; - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - } - len = 0; - } - while(len != 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; - - #else /* if !_LZMA_OUT_READ */ - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - - #endif /* _LZMA_OUT_READ */ - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - UpdateBit0(prob); - - #ifdef _LZMA_OUT_READ - if (distanceLimit == 0) - #else - if (nowPos == 0) - #endif - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - #endif - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - #ifdef _LZMA_OUT_READ - if (rep0 > distanceLimit) - #else - if (rep0 > nowPos) - #endif - return LZMA_RESULT_DATA_ERROR; - - #ifdef _LZMA_OUT_READ - if (dictionarySize - distanceLimit > (UInt32)len) - distanceLimit += len; - else - distanceLimit = dictionarySize; - #endif - - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - #ifdef _LZMA_OUT_READ - vs->Range = Range; - vs->Code = Code; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + (UInt32)nowPos; - vs->DistanceLimit = distanceLimit; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->RemainLen = len; - vs->TempDictionary[0] = tempDictionary[0]; - #endif - - #ifdef _LZMA_IN_CB - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - #else - *inSizeProcessed = (SizeT)(Buffer - inStream); - #endif - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/lib_generic/lzma/LzmaDecode.h b/lib_generic/lzma/LzmaDecode.h deleted file mode 100644 index bd75525..0000000 --- a/lib_generic/lzma/LzmaDecode.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -#include "LzmaTypes.h" - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb UInt16 -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; - #ifdef _LZMA_OUT_READ - UInt32 DictionarySize; - #endif -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - #ifdef _LZMA_IN_CB - const unsigned char *Buffer; - const unsigned char *BufferLim; - #endif - - #ifdef _LZMA_OUT_READ - unsigned char *Dictionary; - UInt32 Range; - UInt32 Code; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 DistanceLimit; - UInt32 Reps[4]; - int State; - int RemainLen; - unsigned char TempDictionary[4]; - #endif -} CLzmaDecoderState; - -#ifdef _LZMA_OUT_READ -#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; } -#endif - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif diff --git a/lib_generic/lzma/LzmaTools.c b/lib_generic/lzma/LzmaTools.c index 5ac42e5..30bc26c 100644 --- a/lib_generic/lzma/LzmaTools.c +++ b/lib_generic/lzma/LzmaTools.c @@ -1,7 +1,7 @@ /* - * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.57 + * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.65 * - * Copyright (C) 2007-2008 Industrie Dial Face S.p.A. + * Copyright (C) 2007-2009 Industrie Dial Face S.p.A. * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com) * * Copyright (C) 1999-2005 Igor Pavlov @@ -40,103 +40,87 @@ #ifdef CONFIG_LZMA

#define LZMA_PROPERTIES_OFFSET 0 -#define LZMA_SIZE_OFFSET LZMA_PROPERTIES_SIZE +#define LZMA_SIZE_OFFSET LZMA_PROPS_SIZE #define LZMA_DATA_OFFSET LZMA_SIZE_OFFSET+sizeof(uint64_t)

#include "LzmaTools.h" -#include "LzmaDecode.h" +#include "LzmaDec.h"

#include <linux/string.h> #include <malloc.h>

+static void *SzAlloc(void *p, size_t size) { p = p; return malloc(size); } +static void SzFree(void *p, void *address) { p = p; free(address); } + int lzmaBuffToBuffDecompress (unsigned char *outStream, SizeT *uncompressedSize, - unsigned char *inStream, SizeT length) + unsigned char *inStream, SizeT length) { - int res = LZMA_RESULT_DATA_ERROR; - int i; - - SizeT outSizeFull = 0xFFFFFFFF; /* 4GBytes limit */ - SizeT inProcessed; - SizeT outProcessed; - SizeT outSize; - SizeT outSizeHigh; - CLzmaDecoderState state; /* it's about 24-80 bytes structure, if int is 32-bit */ - unsigned char properties[LZMA_PROPERTIES_SIZE]; - SizeT compressedSize = (SizeT)(length - LZMA_DATA_OFFSET); - - debug ("LZMA: Image address............... 0x%lx\n", inStream); - debug ("LZMA: Properties address.......... 0x%lx\n", inStream + LZMA_PROPERTIES_OFFSET); - debug ("LZMA: Uncompressed size address... 0x%lx\n", inStream + LZMA_SIZE_OFFSET); - debug ("LZMA: Compressed data address..... 0x%lx\n", inStream + LZMA_DATA_OFFSET); - debug ("LZMA: Destination address......... 0x%lx\n", outStream); - - memcpy(properties, inStream + LZMA_PROPERTIES_OFFSET, LZMA_PROPERTIES_SIZE); - - memset(&state, 0, sizeof(state)); - res = LzmaDecodeProperties(&state.Properties, - properties, - LZMA_PROPERTIES_SIZE); - if (res != LZMA_RESULT_OK) { - return res; - } - - outSize = 0; - outSizeHigh = 0; - /* Read the uncompressed size */ - for (i = 0; i < 8; i++) { - unsigned char b = inStream[LZMA_SIZE_OFFSET + i]; - if (i < 4) { - outSize += (UInt32)(b) << (i * 8); - } else { - outSizeHigh += (UInt32)(b) << ((i - 4) * 8); - } - } - - outSizeFull = (SizeT)outSize; - if (sizeof(SizeT) >= 8) { - /* - * SizeT is a 64 bit uint => We can manage files larger than 4GB! - * - */ - outSizeFull |= (((SizeT)outSizeHigh << 16) << 16); - } else if (outSizeHigh != 0 || (UInt32)(SizeT)outSize != outSize) { - /* - * SizeT is a 32 bit uint => We cannot manage files larger than - * 4GB! - * - */ - debug ("LZMA: 64bit support not enabled.\n"); - return LZMA_RESULT_DATA_ERROR; - } - - debug ("LZMA: Uncompresed size............ 0x%lx\n", outSizeFull); - debug ("LZMA: Compresed size.............. 0x%lx\n", compressedSize); - debug ("LZMA: Dynamic memory needed....... 0x%lx", LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); - - state.Probs = (CProb *)malloc(LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); - - if (state.Probs == 0 - || (outStream == 0 && outSizeFull != 0) - || (inStream == 0 && compressedSize != 0)) { - free(state.Probs); - debug ("\n"); - return LZMA_RESULT_DATA_ERROR; - } - - debug (" allocated.\n"); - - /* Decompress */ - - res = LzmaDecode(&state, - inStream + LZMA_DATA_OFFSET, compressedSize, &inProcessed, - outStream, outSizeFull, &outProcessed); - if (res != LZMA_RESULT_OK) { - return res; - } - - *uncompressedSize = outProcessed; - free(state.Probs); - return res; + int res = SZ_ERROR_DATA; + int i; + ISzAlloc g_Alloc; + + SizeT outSizeFull = 0xFFFFFFFF; /* 4GBytes limit */ + SizeT inProcessed; + SizeT outProcessed; + SizeT outSize; + SizeT outSizeHigh; + ELzmaStatus state; + SizeT compressedSize = (SizeT)(length - LZMA_PROPS_SIZE); + + debug ("LZMA: Image address............... 0x%lx\n", inStream); + debug ("LZMA: Properties address.......... 0x%lx\n", inStream + LZMA_PROPERTIES_OFFSET); + debug ("LZMA: Uncompressed size address... 0x%lx\n", inStream + LZMA_SIZE_OFFSET); + debug ("LZMA: Compressed data address..... 0x%lx\n", inStream + LZMA_DATA_OFFSET); + debug ("LZMA: Destination address......... 0x%lx\n", outStream); + + memset(&state, 0, sizeof(state)); + + outSize = 0; + outSizeHigh = 0; + /* Read the uncompressed size */ + for (i = 0; i < 8; i++) { + unsigned char b = inStream[LZMA_SIZE_OFFSET + i]; + if (i < 4) { + outSize += (UInt32)(b) << (i * 8); + } else { + outSizeHigh += (UInt32)(b) << ((i - 4) * 8); + } + } + + outSizeFull = (SizeT)outSize; + if (sizeof(SizeT) >= 8) { + /* + * SizeT is a 64 bit uint => We can manage files larger than 4GB! + * + */ + outSizeFull |= (((SizeT)outSizeHigh << 16) << 16); + } else if (outSizeHigh != 0 || (UInt32)(SizeT)outSize != outSize) { + /* + * SizeT is a 32 bit uint => We cannot manage files larger than + * 4GB! + * + */ + debug ("LZMA: 64bit support not enabled.\n"); + return SZ_ERROR_DATA; + } + + debug ("LZMA: Uncompresed size............ 0x%lx\n", outSizeFull); + debug ("LZMA: Compresed size.............. 0x%lx\n", compressedSize); + + g_Alloc.Alloc = SzAlloc; + g_Alloc.Free = SzFree; + + /* Decompress */ + outProcessed = outSizeFull; + res = LzmaDecode( + outStream, &outProcessed, + inStream + LZMA_DATA_OFFSET, &compressedSize, + inStream, LZMA_PROPS_SIZE, LZMA_FINISH_ANY, &state, &g_Alloc); + if (res != SZ_OK) { + return res; + } + + return res; }

#endif diff --git a/lib_generic/lzma/LzmaTools.h b/lib_generic/lzma/LzmaTools.h index c91fb89..2db80fc 100644 --- a/lib_generic/lzma/LzmaTools.h +++ b/lib_generic/lzma/LzmaTools.h @@ -1,5 +1,5 @@ /* - * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.57 + * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.65 * * Copyright (C) 2007-2008 Industrie Dial Face S.p.A. * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com) @@ -28,7 +28,7 @@ #ifndef __LZMA_TOOL_H__ #define __LZMA_TOOL_H__

-#include "LzmaTypes.h" +#include <lzma/LzmaTypes.h>

extern int lzmaBuffToBuffDecompress (unsigned char *outStream, SizeT *uncompressedSize, unsigned char *inStream, SizeT length); diff --git a/lib_generic/lzma/LzmaTypes.h b/lib_generic/lzma/LzmaTypes.h deleted file mode 100644 index 83f96f4..0000000 --- a/lib_generic/lzma/LzmaTypes.h +++ /dev/null @@ -1,45 +0,0 @@ -/* -LzmaTypes.h - -Types for LZMA Decoder - -This file written and distributed to public domain by Igor Pavlov. -This file is part of LZMA SDK 4.40 (2006-05-01) -*/ - -#ifndef __LZMATYPES_H -#define __LZMATYPES_H - -#ifndef _7ZIP_BYTE_DEFINED -#define _7ZIP_BYTE_DEFINED -typedef unsigned char Byte; -#endif - -#ifndef _7ZIP_UINT16_DEFINED -#define _7ZIP_UINT16_DEFINED -typedef unsigned short UInt16; -#endif - -#ifndef _7ZIP_UINT32_DEFINED -#define _7ZIP_UINT32_DEFINED -#ifdef _LZMA_UINT32_IS_ULONG -typedef unsigned long UInt32; -#else -typedef unsigned int UInt32; -#endif -#endif - -/* #define _LZMA_NO_SYSTEM_SIZE_T */ -/* You can use it, if you don't want <stddef.h> */ - -#ifndef _7ZIP_SIZET_DEFINED -#define _7ZIP_SIZET_DEFINED -#ifdef _LZMA_NO_SYSTEM_SIZE_T -typedef UInt32 SizeT; -#else -#include <stddef.h> -typedef size_t SizeT; -#endif -#endif - -#endif diff --git a/lib_generic/lzma/Makefile b/lib_generic/lzma/Makefile index 3400cd9..2916f21 100644 --- a/lib_generic/lzma/Makefile +++ b/lib_generic/lzma/Makefile @@ -30,7 +30,9 @@ LIB = $(obj)liblzma.a

SOBJS =

-COBJS-$(CONFIG_LZMA) += LzmaDecode.o LzmaTools.o +CFLAGS += -D_LZMA_PROB32 -I$(TOPDIR)/include/linux + +COBJS-$(CONFIG_LZMA) += LzmaDec.o LzmaTools.o

COBJS = $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/lib_generic/lzma/README.txt b/lib_generic/lzma/README.txt index fdb3086..23a9be2 100644 --- a/lib_generic/lzma/README.txt +++ b/lib_generic/lzma/README.txt @@ -7,14 +7,14 @@ Author: Igor Pavlov The import is made using the import_lzmasdk.sh script that:

* untars the lzmaXYY.tar.bz2 file (from the download web page) -* copies the files LzmaDecode.h, LzmaTypes.h, LzmaDecode.c, history.txt, - LGPL.txt, and lzma.txt from source archive into the lib_lzma directory (pwd). +* copies the files LzmaDec.h, Types.h, LzmaDec.c, history.txt, + and lzma.txt from source archive into the lib_lzma directory (pwd).

Example:

- ./import_lzmasdk.sh ~/lzma457.tar.bz2 + . import_lzmasdk.sh ~/lzma465.tar.bz2

-Notice: The files from lzma sdk are not _modified_ by this script! +Notice: The files from lzma sdk are _not modified_ by this script!

The files LzmaTools.{c,h} are provided to export the lzmaBuffToBuffDecompress() function that wraps the complex LzmaDecode() function from the LZMA SDK. The diff --git a/lib_generic/lzma/Types.h b/lib_generic/lzma/Types.h new file mode 100644 index 0000000..2638196 --- /dev/null +++ b/lib_generic/lzma/Types.h @@ -0,0 +1,208 @@ +/* Types.h -- Basic types +2008-11-23 : Igor Pavlov : Public domain */ + +#ifndef __7Z_TYPES_H +#define __7Z_TYPES_H + +#include <stddef.h> + +#ifdef _WIN32 +#include <windows.h> +#endif + +#define SZ_OK 0 + +#define SZ_ERROR_DATA 1 +#define SZ_ERROR_MEM 2 +#define SZ_ERROR_CRC 3 +#define SZ_ERROR_UNSUPPORTED 4 +#define SZ_ERROR_PARAM 5 +#define SZ_ERROR_INPUT_EOF 6 +#define SZ_ERROR_OUTPUT_EOF 7 +#define SZ_ERROR_READ 8 +#define SZ_ERROR_WRITE 9 +#define SZ_ERROR_PROGRESS 10 +#define SZ_ERROR_FAIL 11 +#define SZ_ERROR_THREAD 12 + +#define SZ_ERROR_ARCHIVE 16 +#define SZ_ERROR_NO_ARCHIVE 17 + +typedef int SRes; + +#ifdef _WIN32 +typedef DWORD WRes; +#else +typedef int WRes; +#endif + +#ifndef RINOK +#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; } +#endif + +typedef unsigned char Byte; +typedef short Int16; +typedef unsigned short UInt16; + +#ifdef _LZMA_UINT32_IS_ULONG +typedef long Int32; +typedef unsigned long UInt32; +#else +typedef int Int32; +typedef unsigned int UInt32; +#endif + +#ifdef _SZ_NO_INT_64 + +/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers. + NOTES: Some code will work incorrectly in that case! */ + +typedef long Int64; +typedef unsigned long UInt64; + +#else + +#if defined(_MSC_VER) || defined(__BORLANDC__) +typedef __int64 Int64; +typedef unsigned __int64 UInt64; +#else +typedef long long int Int64; +typedef unsigned long long int UInt64; +#endif + +#endif + +#ifdef _LZMA_NO_SYSTEM_SIZE_T +typedef UInt32 SizeT; +#else +typedef size_t SizeT; +#endif + +typedef int Bool; +#define True 1 +#define False 0 + + +#ifdef _MSC_VER + +#if _MSC_VER >= 1300 +#define MY_NO_INLINE __declspec(noinline) +#else +#define MY_NO_INLINE +#endif + +#define MY_CDECL __cdecl +#define MY_STD_CALL __stdcall +#define MY_FAST_CALL MY_NO_INLINE __fastcall + +#else + +#define MY_CDECL +#define MY_STD_CALL +#define MY_FAST_CALL + +#endif + + +/* The following interfaces use first parameter as pointer to structure */ + +typedef struct +{ + SRes (*Read)(void *p, void *buf, size_t *size); + /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream. + (output(*size) < input(*size)) is allowed */ +} ISeqInStream; + +/* it can return SZ_ERROR_INPUT_EOF */ +SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size); +SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType); +SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf); + +typedef struct +{ + size_t (*Write)(void *p, const void *buf, size_t size); + /* Returns: result - the number of actually written bytes. + (result < size) means error */ +} ISeqOutStream; + +typedef enum +{ + SZ_SEEK_SET = 0, + SZ_SEEK_CUR = 1, + SZ_SEEK_END = 2 +} ESzSeek; + +typedef struct +{ + SRes (*Read)(void *p, void *buf, size_t *size); /* same as ISeqInStream::Read */ + SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin); +} ISeekInStream; + +typedef struct +{ + SRes (*Look)(void *p, void **buf, size_t *size); + /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream. + (output(*size) > input(*size)) is not allowed + (output(*size) < input(*size)) is allowed */ + SRes (*Skip)(void *p, size_t offset); + /* offset must be <= output(*size) of Look */ + + SRes (*Read)(void *p, void *buf, size_t *size); + /* reads directly (without buffer). It's same as ISeqInStream::Read */ + SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin); +} ILookInStream; + +SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size); +SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset); + +/* reads via ILookInStream::Read */ +SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType); +SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size); + +#define LookToRead_BUF_SIZE (1 << 14) + +typedef struct +{ + ILookInStream s; + ISeekInStream *realStream; + size_t pos; + size_t size; + Byte buf[LookToRead_BUF_SIZE]; +} CLookToRead; + +void LookToRead_CreateVTable(CLookToRead *p, int lookahead); +void LookToRead_Init(CLookToRead *p); + +typedef struct +{ + ISeqInStream s; + ILookInStream *realStream; +} CSecToLook; + +void SecToLook_CreateVTable(CSecToLook *p); + +typedef struct +{ + ISeqInStream s; + ILookInStream *realStream; +} CSecToRead; + +void SecToRead_CreateVTable(CSecToRead *p); + +typedef struct +{ + SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize); + /* Returns: result. (result != SZ_OK) means break. + Value (UInt64)(Int64)-1 for size means unknown value. */ +} ICompressProgress; + +typedef struct +{ + void *(*Alloc)(void *p, size_t size); + void (*Free)(void *p, void *address); /* address can be 0 */ +} ISzAlloc; + +#define IAlloc_Alloc(p, size) (p)->Alloc((p), size) +#define IAlloc_Free(p, a) (p)->Free((p), a) + +#endif diff --git a/lib_generic/lzma/history.txt b/lib_generic/lzma/history.txt index dad1858..9bed5eb 100644 --- a/lib_generic/lzma/history.txt +++ b/lib_generic/lzma/history.txt @@ -1,198 +1,236 @@ -HISTORY of the LZMA SDK ------------------------ - - 4.57 2007-12-12 - ------------------------- - - Speed optimizations in Ñ++ LZMA Decoder. - - Small changes for more compatibility with some C/C++ compilers. - - - 4.49 beta 2007-07-05 - ------------------------- - - .7z ANSI-C Decoder: - - now it supports BCJ and BCJ2 filters - - now it supports files larger than 4 GB. - - now it supports "Last Write Time" field for files. - - C++ code for .7z archives compressing/decompressing from 7-zip - was included to LZMA SDK. - - - 4.43 2006-06-04 - ------------------------- - - Small changes for more compatibility with some C/C++ compilers. - - - 4.42 2006-05-15 - ------------------------- - - Small changes in .h files in ANSI-C version. - - - 4.39 beta 2006-04-14 - ------------------------- - - Bug in versions 4.33b:4.38b was fixed: - C++ version of LZMA encoder could not correctly compress - files larger than 2 GB with HC4 match finder (-mfhc4). - - - 4.37 beta 2005-04-06 - ------------------------- - - Fixes in C++ code: code could no be compiled if _NO_EXCEPTIONS was defined. - - - 4.35 beta 2005-03-02 - ------------------------- - - Bug was fixed in C++ version of LZMA Decoder: - If encoded stream was corrupted, decoder could access memory - outside of allocated range. - - - 4.34 beta 2006-02-27 - ------------------------- - - Compressing speed and memory requirements for compressing were increased - - LZMA now can use only these match finders: HC4, BT2, BT3, BT4 - - - 4.32 2005-12-09 - ------------------------- - - Java version of LZMA SDK was included - - - 4.30 2005-11-20 - ------------------------- - - Compression ratio was improved in -a2 mode - - Speed optimizations for compressing in -a2 mode - - -fb switch now supports values up to 273 - - Bug in 7z_C (7zIn.c) was fixed: - It used Alloc/Free functions from different memory pools. - So if program used two memory pools, it worked incorrectly. - - 7z_C: .7z format supporting was improved - - LZMA# SDK (C#.NET version) was included - - - 4.27 (Updated) 2005-09-21 - ------------------------- - - Some GUIDs/interfaces in C++ were changed. - IStream.h: - ISequentialInStream::Read now works as old ReadPart - ISequentialOutStream::Write now works as old WritePart - - - 4.27 2005-08-07 - ------------------------- - - Bug in LzmaDecodeSize.c was fixed: - if _LZMA_IN_CB and _LZMA_OUT_READ were defined, - decompressing worked incorrectly. - - - 4.26 2005-08-05 - ------------------------- - - Fixes in 7z_C code and LzmaTest.c: - previous versions could work incorrectly, - if malloc(0) returns 0 - - - 4.23 2005-06-29 - ------------------------- - - Small fixes in C++ code - - - 4.22 2005-06-10 - ------------------------- - - Small fixes - - - 4.21 2005-06-08 - ------------------------- - - Interfaces for ANSI-C LZMA Decoder (LzmaDecode.c) were changed - - New additional version of ANSI-C LZMA Decoder with zlib-like interface: - - LzmaStateDecode.h - - LzmaStateDecode.c - - LzmaStateTest.c - - ANSI-C LZMA Decoder now can decompress files larger than 4 GB - - - 4.17 2005-04-18 - ------------------------- - - New example for RAM->RAM compressing/decompressing: - LZMA + BCJ (filter for x86 code): - - LzmaRam.h - - LzmaRam.cpp - - LzmaRamDecode.h - - LzmaRamDecode.c - - -f86 switch for lzma.exe - - - 4.16 2005-03-29 - ------------------------- - - Bug was fixed in LzmaDecode.c (ANSI-C LZMA Decoder): - If _LZMA_OUT_READ was defined, and if encoded stream was corrupted, - decoder could access memory outside of allocated range. - - Speed optimization of ANSI-C LZMA Decoder (now it's about 20% faster). - Old version of LZMA Decoder now is in file LzmaDecodeSize.c. - LzmaDecodeSize.c can provide slightly smaller code than LzmaDecode.c - - Small speed optimization in LZMA C++ code - - filter for SPARC's code was added - - Simplified version of .7z ANSI-C Decoder was included - - - 4.06 2004-09-05 - ------------------------- - - Bug in v4.05 was fixed: - LZMA-Encoder didn't release output stream in some cases. - - - 4.05 2004-08-25 - ------------------------- - - Source code of filters for x86, IA-64, ARM, ARM-Thumb - and PowerPC code was included to SDK - - Some internal minor changes - - - 4.04 2004-07-28 - ------------------------- - - More compatibility with some C++ compilers - - - 4.03 2004-06-18 - ------------------------- - - "Benchmark" command was added. It measures compressing - and decompressing speed and shows rating values. - Also it checks hardware errors. - - - 4.02 2004-06-10 - ------------------------- - - C++ LZMA Encoder/Decoder code now is more portable - and it can be compiled by GCC on Linux. - - - 4.01 2004-02-15 - ------------------------- - - Some detection of data corruption was enabled. - LzmaDecode.c / RangeDecoderReadByte - ..... - { - rd->ExtraBytes = 1; - return 0xFF; - } - - - 4.00 2004-02-13 - ------------------------- - - Original version of LZMA SDK - - - -HISTORY of the LZMA -------------------- - 2001-2007: Improvements to LZMA compressing/decompressing code, - keeping compatibility with original LZMA format - 1996-2001: Development of LZMA compression format - - Some milestones: - - 2001-08-30: LZMA compression was added to 7-Zip - 1999-01-02: First version of 7-Zip was released - - -End of document +HISTORY of the LZMA SDK +----------------------- + +4.65 2009-02-03 +------------------------- +- Some minor fixes + + +4.63 2008-12-31 +------------------------- +- Some minor fixes + + +4.61 beta 2008-11-23 +------------------------- +- The bug in ANSI-C LZMA Decoder was fixed: + If encoded stream was corrupted, decoder could access memory + outside of allocated range. +- Some changes in ANSI-C 7z Decoder interfaces. +- LZMA SDK is placed in the public domain. + + +4.60 beta 2008-08-19 +------------------------- +- Some minor fixes. + + +4.59 beta 2008-08-13 +------------------------- +- The bug was fixed: + LZMA Encoder in fast compression mode could access memory outside of + allocated range in some rare cases. + + +4.58 beta 2008-05-05 +------------------------- +- ANSI-C LZMA Decoder was rewritten for speed optimizations. +- ANSI-C LZMA Encoder was included to LZMA SDK. +- C++ LZMA code now is just wrapper over ANSI-C code. + + +4.57 2007-12-12 +------------------------- +- Speed optimizations in Ñ++ LZMA Decoder. +- Small changes for more compatibility with some C/C++ compilers. + + +4.49 beta 2007-07-05 +------------------------- +- .7z ANSI-C Decoder: + - now it supports BCJ and BCJ2 filters + - now it supports files larger than 4 GB. + - now it supports "Last Write Time" field for files. +- C++ code for .7z archives compressing/decompressing from 7-zip + was included to LZMA SDK. + + +4.43 2006-06-04 +------------------------- +- Small changes for more compatibility with some C/C++ compilers. + + +4.42 2006-05-15 +------------------------- +- Small changes in .h files in ANSI-C version. + + +4.39 beta 2006-04-14 +------------------------- +- The bug in versions 4.33b:4.38b was fixed: + C++ version of LZMA encoder could not correctly compress + files larger than 2 GB with HC4 match finder (-mfhc4). + + +4.37 beta 2005-04-06 +------------------------- +- Fixes in C++ code: code could no be compiled if _NO_EXCEPTIONS was defined. + + +4.35 beta 2005-03-02 +------------------------- +- The bug was fixed in C++ version of LZMA Decoder: + If encoded stream was corrupted, decoder could access memory + outside of allocated range. + + +4.34 beta 2006-02-27 +------------------------- +- Compressing speed and memory requirements for compressing were increased +- LZMA now can use only these match finders: HC4, BT2, BT3, BT4 + + +4.32 2005-12-09 +------------------------- +- Java version of LZMA SDK was included + + +4.30 2005-11-20 +------------------------- +- Compression ratio was improved in -a2 mode +- Speed optimizations for compressing in -a2 mode +- -fb switch now supports values up to 273 +- The bug in 7z_C (7zIn.c) was fixed: + It used Alloc/Free functions from different memory pools. + So if program used two memory pools, it worked incorrectly. +- 7z_C: .7z format supporting was improved +- LZMA# SDK (C#.NET version) was included + + +4.27 (Updated) 2005-09-21 +------------------------- +- Some GUIDs/interfaces in C++ were changed. + IStream.h: + ISequentialInStream::Read now works as old ReadPart + ISequentialOutStream::Write now works as old WritePart + + +4.27 2005-08-07 +------------------------- +- The bug in LzmaDecodeSize.c was fixed: + if _LZMA_IN_CB and _LZMA_OUT_READ were defined, + decompressing worked incorrectly. + + +4.26 2005-08-05 +------------------------- +- Fixes in 7z_C code and LzmaTest.c: + previous versions could work incorrectly, + if malloc(0) returns 0 + + +4.23 2005-06-29 +------------------------- +- Small fixes in C++ code + + +4.22 2005-06-10 +------------------------- +- Small fixes + + +4.21 2005-06-08 +------------------------- +- Interfaces for ANSI-C LZMA Decoder (LzmaDecode.c) were changed +- New additional version of ANSI-C LZMA Decoder with zlib-like interface: + - LzmaStateDecode.h + - LzmaStateDecode.c + - LzmaStateTest.c +- ANSI-C LZMA Decoder now can decompress files larger than 4 GB + + +4.17 2005-04-18 +------------------------- +- New example for RAM->RAM compressing/decompressing: + LZMA + BCJ (filter for x86 code): + - LzmaRam.h + - LzmaRam.cpp + - LzmaRamDecode.h + - LzmaRamDecode.c + - -f86 switch for lzma.exe + + +4.16 2005-03-29 +------------------------- +- The bug was fixed in LzmaDecode.c (ANSI-C LZMA Decoder): + If _LZMA_OUT_READ was defined, and if encoded stream was corrupted, + decoder could access memory outside of allocated range. +- Speed optimization of ANSI-C LZMA Decoder (now it's about 20% faster). + Old version of LZMA Decoder now is in file LzmaDecodeSize.c. + LzmaDecodeSize.c can provide slightly smaller code than LzmaDecode.c +- Small speed optimization in LZMA C++ code +- filter for SPARC's code was added +- Simplified version of .7z ANSI-C Decoder was included + + +4.06 2004-09-05 +------------------------- +- The bug in v4.05 was fixed: + LZMA-Encoder didn't release output stream in some cases. + + +4.05 2004-08-25 +------------------------- +- Source code of filters for x86, IA-64, ARM, ARM-Thumb + and PowerPC code was included to SDK +- Some internal minor changes + + +4.04 2004-07-28 +------------------------- +- More compatibility with some C++ compilers + + +4.03 2004-06-18 +------------------------- +- "Benchmark" command was added. It measures compressing + and decompressing speed and shows rating values. + Also it checks hardware errors. + + +4.02 2004-06-10 +------------------------- +- C++ LZMA Encoder/Decoder code now is more portable + and it can be compiled by GCC on Linux. + + +4.01 2004-02-15 +------------------------- +- Some detection of data corruption was enabled. + LzmaDecode.c / RangeDecoderReadByte + ..... + { + rd->ExtraBytes = 1; + return 0xFF; + } + + +4.00 2004-02-13 +------------------------- +- Original version of LZMA SDK + + + +HISTORY of the LZMA +------------------- + 2001-2008: Improvements to LZMA compressing/decompressing code, + keeping compatibility with original LZMA format + 1996-2001: Development of LZMA compression format + + Some milestones: + + 2001-08-30: LZMA compression was added to 7-Zip + 1999-01-02: First version of 7-Zip was released + + +End of document diff --git a/lib_generic/lzma/import_lzmasdk.sh b/lib_generic/lzma/import_lzmasdk.sh index 5212e48..1e0f686 100644 --- a/lib_generic/lzma/import_lzmasdk.sh +++ b/lib_generic/lzma/import_lzmasdk.sh @@ -17,14 +17,12 @@ fi

BASENAME=`basename $1 .tar.bz2` TMPDIR=/tmp/tmp_lib_$BASENAME -FILES="C/Compress/Lzma/LzmaDecode.h - C/Compress/Lzma/LzmaTypes.h - C/Compress/Lzma/LzmaDecode.c +FILES="C/LzmaDec.h + C/Types.h + C/LzmaDec.c history.txt - LGPL.txt lzma.txt"

- mkdir -p $TMPDIR echo "Untar $1 -> $TMPDIR" tar -jxf $1 -C $TMPDIR diff --git a/lib_generic/lzma/lzma.txt b/lib_generic/lzma/lzma.txt index 5f1a0c9..d4f4af9 100644 --- a/lib_generic/lzma/lzma.txt +++ b/lib_generic/lzma/lzma.txt @@ -1,663 +1,594 @@ -LZMA SDK 4.57 -------------- - -LZMA SDK Copyright (C) 1999-2007 Igor Pavlov - -LZMA SDK provides the documentation, samples, header files, libraries, -and tools you need to develop applications that use LZMA compression. - -LZMA is default and general compression method of 7z format -in 7-Zip compression program (www.7-zip.org). LZMA provides high -compression ratio and very fast decompression. - -LZMA is an improved version of famous LZ77 compression algorithm. -It was improved in way of maximum increasing of compression ratio, -keeping high decompression speed and low memory requirements for -decompressing. - - - -LICENSE -------- - -LZMA SDK is available under any of the following licenses: - -1) GNU Lesser General Public License (GNU LGPL) -2) Common Public License (CPL) -3) Simplified license for unmodified code (read SPECIAL EXCEPTION) -4) Proprietary license - -It means that you can select one of these four options and follow rules of that license. - - -1,2) GNU LGPL and CPL licenses are pretty similar and both these -licenses are classified as - - "Free software licenses" at http://www.gnu.org/ - - "OSI-approved" at http://www.opensource.org/ - - -3) SPECIAL EXCEPTION - -Igor Pavlov, as the author of this code, expressly permits you -to statically or dynamically link your code (or bind by name) -to the files from LZMA SDK without subjecting your linked -code to the terms of the CPL or GNU LGPL. -Any modifications or additions to files from LZMA SDK, however, -are subject to the GNU LGPL or CPL terms. - -SPECIAL EXCEPTION allows you to use LZMA SDK in applications with closed code, -while you keep LZMA SDK code unmodified. - - -SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly permits -you to use this code under the same terms and conditions contained in the License -Agreement you have for any previous version of LZMA SDK developed by Igor Pavlov. - -SPECIAL EXCEPTION #2 allows owners of proprietary licenses to use latest version -of LZMA SDK as update for previous versions. - - -SPECIAL EXCEPTION #3: Igor Pavlov, as the author of this code, expressly permits -you to use code of the following files: -BranchTypes.h, LzmaTypes.h, LzmaTest.c, LzmaStateTest.c, LzmaAlone.cpp, -LzmaAlone.cs, LzmaAlone.java -as public domain code. - - -4) Proprietary license - -LZMA SDK also can be available under a proprietary license which -can include: - -1) Right to modify code without subjecting modified code to the -terms of the CPL or GNU LGPL -2) Technical support for code - -To request such proprietary license or any additional consultations, -send email message from that page: -http://www.7-zip.org/support.html - - -You should have received a copy of the GNU Lesser General Public -License along with this library; if not, write to the Free Software -Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - -You should have received a copy of the Common Public License -along with this library. - - -LZMA SDK Contents ------------------ - -LZMA SDK includes: - - - C++ source code of LZMA compressing and decompressing - - ANSI-C compatible source code for LZMA decompressing - - C# source code for LZMA compressing and decompressing - - Java source code for LZMA compressing and decompressing - - Compiled file->file LZMA compressing/decompressing program for Windows system - -ANSI-C LZMA decompression code was ported from original C++ sources to C. -Also it was simplified and optimized for code size. -But it is fully compatible with LZMA from 7-Zip. - - -UNIX/Linux version ------------------- -To compile C++ version of file->file LZMA, go to directory -C/7zip/Compress/LZMA_Alone -and type "make" or "make clean all" to recompile all. - -In some UNIX/Linux versions you must compile LZMA with static libraries. -To compile with static libraries, change string in makefile -LIB = -lm -to string -LIB = -lm -static - - -Files ---------------------- -C - C source code -CPP - CPP source code -CS - C# source code -Java - Java source code -lzma.txt - LZMA SDK description (this file) -7zFormat.txt - 7z Format description -7zC.txt - 7z ANSI-C Decoder description (this file) -methods.txt - Compression method IDs for .7z -LGPL.txt - GNU Lesser General Public License -CPL.html - Common Public License -lzma.exe - Compiled file->file LZMA encoder/decoder for Windows -history.txt - history of the LZMA SDK - - -Source code structure ---------------------- - -C - C files - Compress - files related to compression/decompression - Lz - files related to LZ (Lempel-Ziv) compression algorithm - Lzma - ANSI-C compatible LZMA decompressor - - LzmaDecode.h - interface for LZMA decoding on ANSI-C - LzmaDecode.c - LZMA decoding on ANSI-C (new fastest version) - LzmaDecodeSize.c - LZMA decoding on ANSI-C (old size-optimized version) - LzmaTest.c - test application that decodes LZMA encoded file - LzmaTypes.h - basic types for LZMA Decoder - LzmaStateDecode.h - interface for LZMA decoding (State version) - LzmaStateDecode.c - LZMA decoding on ANSI-C (State version) - LzmaStateTest.c - test application (State version) - - Branch - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code - - Archive - files related to archiving - 7z_C - 7z ANSI-C Decoder - - -CPP -- CPP files - - Common - common files for C++ projects - Windows - common files for Windows related code - 7zip - files related to 7-Zip Project - - Common - common files for 7-Zip - - Compress - files related to compression/decompression - - LZ - files related to LZ (Lempel-Ziv) compression algorithm - - Copy - Copy coder - RangeCoder - Range Coder (special code of compression/decompression) - LZMA - LZMA compression/decompression on C++ - LZMA_Alone - file->file LZMA compression/decompression - - Branch - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code - - Archive - files related to archiving - - Common - common files for archive handling - 7z - 7z C++ Encoder/Decoder - - Bundles - Modules that are bundles of other modules - - Alone7z - 7zr.exe: Standalone version of 7z.exe that supports only 7z/LZMA/BCJ/BCJ2 - Format7zR - 7zr.dll: Reduced version of 7za.dll: extracting/compressing to 7z/LZMA/BCJ/BCJ2 - Format7zExtractR - 7zxr.dll: Reduced version of 7zxa.dll: extracting from 7z/LZMA/BCJ/BCJ2. - - UI - User Interface files - - Client7z - Test application for 7za.dll, 7zr.dll, 7zxr.dll - Common - Common UI files - Console - Code for console archiver - - - -CS - C# files - 7zip - Common - some common files for 7-Zip - Compress - files related to compression/decompression - LZ - files related to LZ (Lempel-Ziv) compression algorithm - LZMA - LZMA compression/decompression - LzmaAlone - file->file LZMA compression/decompression - RangeCoder - Range Coder (special code of compression/decompression) - -Java - Java files - SevenZip - Compression - files related to compression/decompression - LZ - files related to LZ (Lempel-Ziv) compression algorithm - LZMA - LZMA compression/decompression - RangeCoder - Range Coder (special code of compression/decompression) - -C/C++ source code of LZMA SDK is part of 7-Zip project. - -You can find ANSI-C LZMA decompressing code at folder - C/7zip/Compress/Lzma -7-Zip doesn't use that ANSI-C LZMA code and that code was developed -specially for this SDK. And files from C/7zip/Compress/Lzma do not need -files from other directories of SDK for compiling. - -7-Zip source code can be downloaded from 7-Zip's SourceForge page: - - http://sourceforge.net/projects/sevenzip/ - - -LZMA features -------------- - - Variable dictionary size (up to 1 GB) - - Estimated compressing speed: about 1 MB/s on 1 GHz CPU - - Estimated decompressing speed: - - 8-12 MB/s on 1 GHz Intel Pentium 3 or AMD Athlon - - 500-1000 KB/s on 100 MHz ARM, MIPS, PowerPC or other simple RISC - - Small memory requirements for decompressing (8-32 KB + DictionarySize) - - Small code size for decompressing: 2-8 KB (depending from - speed optimizations) - -LZMA decoder uses only integer operations and can be -implemented in any modern 32-bit CPU (or on 16-bit CPU with some conditions). - -Some critical operations that affect to speed of LZMA decompression: - 1) 32*16 bit integer multiply - 2) Misspredicted branches (penalty mostly depends from pipeline length) - 3) 32-bit shift and arithmetic operations - -Speed of LZMA decompressing mostly depends from CPU speed. -Memory speed has no big meaning. But if your CPU has small data cache, -overall weight of memory speed will slightly increase. - - -How To Use ----------- - -Using LZMA encoder/decoder executable --------------------------------------- - -Usage: LZMA <e|d> inputFile outputFile [<switches>...] - - e: encode file - - d: decode file - - b: Benchmark. There are two tests: compressing and decompressing - with LZMA method. Benchmark shows rating in MIPS (million - instructions per second). Rating value is calculated from - measured speed and it is normalized with AMD Athlon 64 X2 CPU - results. Also Benchmark checks possible hardware errors (RAM - errors in most cases). Benchmark uses these settings: - (-a1, -d21, -fb32, -mfbt4). You can change only -d. Also you - can change number of iterations. Example for 30 iterations: - LZMA b 30 - Default number of iterations is 10. - -<Switches> - - - -a{N}: set compression mode 0 = fast, 1 = normal - default: 1 (normal) - - d{N}: Sets Dictionary size - [0, 30], default: 23 (8MB) - The maximum value for dictionary size is 1 GB = 2^30 bytes. - Dictionary size is calculated as DictionarySize = 2^N bytes. - For decompressing file compressed by LZMA method with dictionary - size D = 2^N you need about D bytes of memory (RAM). - - -fb{N}: set number of fast bytes - [5, 273], default: 128 - Usually big number gives a little bit better compression ratio - and slower compression process. - - -lc{N}: set number of literal context bits - [0, 8], default: 3 - Sometimes lc=4 gives gain for big files. - - -lp{N}: set number of literal pos bits - [0, 4], default: 0 - lp switch is intended for periodical data when period is - equal 2^N. For example, for 32-bit (4 bytes) - periodical data you can use lp=2. Often it's better to set lc0, - if you change lp switch. - - -pb{N}: set number of pos bits - [0, 4], default: 2 - pb switch is intended for periodical data - when period is equal 2^N. - - -mf{MF_ID}: set Match Finder. Default: bt4. - Algorithms from hc* group doesn't provide good compression - ratio, but they often works pretty fast in combination with - fast mode (-a0). - - Memory requirements depend from dictionary size - (parameter "d" in table below). - - MF_ID Memory Description - - bt2 d * 9.5 + 4MB Binary Tree with 2 bytes hashing. - bt3 d * 11.5 + 4MB Binary Tree with 3 bytes hashing. - bt4 d * 11.5 + 4MB Binary Tree with 4 bytes hashing. - hc4 d * 7.5 + 4MB Hash Chain with 4 bytes hashing. - - -eos: write End Of Stream marker. By default LZMA doesn't write - eos marker, since LZMA decoder knows uncompressed size - stored in .lzma file header. - - -si: Read data from stdin (it will write End Of Stream marker). - -so: Write data to stdout - - -Examples: - -1) LZMA e file.bin file.lzma -d16 -lc0 - -compresses file.bin to file.lzma with 64 KB dictionary (2^16=64K) -and 0 literal context bits. -lc0 allows to reduce memory requirements -for decompression. - - -2) LZMA e file.bin file.lzma -lc0 -lp2 - -compresses file.bin to file.lzma with settings suitable -for 32-bit periodical data (for example, ARM or MIPS code). - -3) LZMA d file.lzma file.bin - -decompresses file.lzma to file.bin. - - -Compression ratio hints ------------------------ - -Recommendations ---------------- - -To increase compression ratio for LZMA compressing it's desirable -to have aligned data (if it's possible) and also it's desirable to locate -data in such order, where code is grouped in one place and data is -grouped in other place (it's better than such mixing: code, data, code, -data, ...). - - -Using Filters -------------- -You can increase compression ratio for some data types, using -special filters before compressing. For example, it's possible to -increase compression ratio on 5-10% for code for those CPU ISAs: -x86, IA-64, ARM, ARM-Thumb, PowerPC, SPARC. - -You can find C/C++ source code of such filters in folder "7zip/Compress/Branch" - -You can check compression ratio gain of these filters with such -7-Zip commands (example for ARM code): -No filter: - 7z a a1.7z a.bin -m0=lzma - -With filter for little-endian ARM code: - 7z a a2.7z a.bin -m0=bc_arm -m1=lzma - -With filter for big-endian ARM code (using additional Swap4 filter): - 7z a a3.7z a.bin -m0=swap4 -m1=bc_arm -m2=lzma - -It works in such manner: -Compressing = Filter_encoding + LZMA_encoding -Decompressing = LZMA_decoding + Filter_decoding - -Compressing and decompressing speed of such filters is very high, -so it will not increase decompressing time too much. -Moreover, it reduces decompression time for LZMA_decoding, -since compression ratio with filtering is higher. - -These filters convert CALL (calling procedure) instructions -from relative offsets to absolute addresses, so such data becomes more -compressible. Source code of these CALL filters is pretty simple -(about 20 lines of C++), so you can convert it from C++ version yourself. - -For some ISAs (for example, for MIPS) it's impossible to get gain from such filter. - - -LZMA compressed file format ---------------------------- -Offset Size Description - 0 1 Special LZMA properties for compressed data - 1 4 Dictionary size (little endian) - 5 8 Uncompressed size (little endian). -1 means unknown size - 13 Compressed data - - -ANSI-C LZMA Decoder -~~~~~~~~~~~~~~~~~~~ - -To compile ANSI-C LZMA Decoder you can use one of the following files sets: -1) LzmaDecode.h + LzmaDecode.c + LzmaTest.c (fastest version) -2) LzmaDecode.h + LzmaDecodeSize.c + LzmaTest.c (old size-optimized version) -3) LzmaStateDecode.h + LzmaStateDecode.c + LzmaStateTest.c (zlib-like interface) - - -Memory requirements for LZMA decoding -------------------------------------- - -LZMA decoder doesn't allocate memory itself, so you must -allocate memory and send it to LZMA. - -Stack usage of LZMA decoding function for local variables is not -larger than 200 bytes. - -How To decompress data ----------------------- - -LZMA Decoder (ANSI-C version) now supports 5 interfaces: -1) Single-call Decompressing -2) Single-call Decompressing with input stream callback -3) Multi-call Decompressing with output buffer -4) Multi-call Decompressing with input callback and output buffer -5) Multi-call State Decompressing (zlib-like interface) - -Variant-5 is similar to Variant-4, but Variant-5 doesn't use callback functions. - -Decompressing steps -------------------- - -1) read LZMA properties (5 bytes): - unsigned char properties[LZMA_PROPERTIES_SIZE]; - -2) read uncompressed size (8 bytes, little-endian) - -3) Decode properties: - - CLzmaDecoderState state; /* it's 24-140 bytes structure, if int is 32-bit */ - - if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK) - return PrintError(rs, "Incorrect stream properties"); - -4) Allocate memory block for internal Structures: - - state.Probs = (CProb *)malloc(LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); - if (state.Probs == 0) - return PrintError(rs, kCantAllocateMessage); - - LZMA decoder uses array of CProb variables as internal structure. - By default, CProb is unsigned_short. But you can define _LZMA_PROB32 to make - it unsigned_int. It can increase speed on some 32-bit CPUs, but memory - usage will be doubled in that case. - - -5) Main Decompressing - -You must use one of the following interfaces: - -5.1 Single-call Decompressing ------------------------------ -When to use: RAM->RAM decompressing -Compile files: LzmaDecode.h, LzmaDecode.c -Compile defines: no defines -Memory Requirements: - - Input buffer: compressed size - - Output buffer: uncompressed size - - LZMA Internal Structures (~16 KB for default settings) - -Interface: - int res = LzmaDecode(&state, - inStream, compressedSize, &inProcessed, - outStream, outSize, &outProcessed); - - -5.2 Single-call Decompressing with input stream callback --------------------------------------------------------- -When to use: File->RAM or Flash->RAM decompressing. -Compile files: LzmaDecode.h, LzmaDecode.c -Compile defines: _LZMA_IN_CB -Memory Requirements: - - Buffer for input stream: any size (for example, 16 KB) - - Output buffer: uncompressed size - - LZMA Internal Structures (~16 KB for default settings) - -Interface: - typedef struct _CBuffer - { - ILzmaInCallback InCallback; - FILE *File; - unsigned char Buffer[kInBufferSize]; - } CBuffer; - - int LzmaReadCompressed(void *object, const unsigned char **buffer, SizeT *size) - { - CBuffer *bo = (CBuffer *)object; - *buffer = bo->Buffer; - *size = MyReadFile(bo->File, bo->Buffer, kInBufferSize); - return LZMA_RESULT_OK; - } - - CBuffer g_InBuffer; - - g_InBuffer.File = inFile; - g_InBuffer.InCallback.Read = LzmaReadCompressed; - int res = LzmaDecode(&state, - &g_InBuffer.InCallback, - outStream, outSize, &outProcessed); - - -5.3 Multi-call decompressing with output buffer ------------------------------------------------ -When to use: RAM->File decompressing -Compile files: LzmaDecode.h, LzmaDecode.c -Compile defines: _LZMA_OUT_READ -Memory Requirements: - - Input buffer: compressed size - - Buffer for output stream: any size (for example, 16 KB) - - LZMA Internal Structures (~16 KB for default settings) - - LZMA dictionary (dictionary size is encoded in stream properties) - -Interface: - - state.Dictionary = (unsigned char *)malloc(state.Properties.DictionarySize); - - LzmaDecoderInit(&state); - do - { - LzmaDecode(&state, - inBuffer, inAvail, &inProcessed, - g_OutBuffer, outAvail, &outProcessed); - inAvail -= inProcessed; - inBuffer += inProcessed; - } - while you need more bytes - - see LzmaTest.c for more details. - - -5.4 Multi-call decompressing with input callback and output buffer ------------------------------------------------------------------- -When to use: File->File decompressing -Compile files: LzmaDecode.h, LzmaDecode.c -Compile defines: _LZMA_IN_CB, _LZMA_OUT_READ -Memory Requirements: - - Buffer for input stream: any size (for example, 16 KB) - - Buffer for output stream: any size (for example, 16 KB) - - LZMA Internal Structures (~16 KB for default settings) - - LZMA dictionary (dictionary size is encoded in stream properties) - -Interface: - - state.Dictionary = (unsigned char *)malloc(state.Properties.DictionarySize); - - LzmaDecoderInit(&state); - do - { - LzmaDecode(&state, - &bo.InCallback, - g_OutBuffer, outAvail, &outProcessed); - } - while you need more bytes - - see LzmaTest.c for more details: - - -5.5 Multi-call State Decompressing (zlib-like interface) ------------------------------------------------------------------- -When to use: file->file decompressing -Compile files: LzmaStateDecode.h, LzmaStateDecode.c -Compile defines: -Memory Requirements: - - Buffer for input stream: any size (for example, 16 KB) - - Buffer for output stream: any size (for example, 16 KB) - - LZMA Internal Structures (~16 KB for default settings) - - LZMA dictionary (dictionary size is encoded in stream properties) - -Interface: - - state.Dictionary = (unsigned char *)malloc(state.Properties.DictionarySize); - - - LzmaDecoderInit(&state); - do - { - res = LzmaDecode(&state, - inBuffer, inAvail, &inProcessed, - g_OutBuffer, outAvail, &outProcessed, - finishDecoding); - inAvail -= inProcessed; - inBuffer += inProcessed; - } - while you need more bytes - - see LzmaStateTest.c for more details: - - -6) Free all allocated blocks - - -Note ----- -LzmaDecodeSize.c is size-optimized version of LzmaDecode.c. -But compiled code of LzmaDecodeSize.c can be larger than -compiled code of LzmaDecode.c. So it's better to use -LzmaDecode.c in most cases. - - -EXIT codes ------------ - -LZMA decoder can return one of the following codes: - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - -If you use callback function for input data and you return some -error code, LZMA Decoder also returns that code. - - - -LZMA Defines ------------- - -_LZMA_IN_CB - Use callback for input data - -_LZMA_OUT_READ - Use read function for output data - -_LZMA_LOC_OPT - Enable local speed optimizations inside code. - _LZMA_LOC_OPT is only for LzmaDecodeSize.c (size-optimized version). - _LZMA_LOC_OPT doesn't affect LzmaDecode.c (speed-optimized version) - and LzmaStateDecode.c - -_LZMA_PROB32 - It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case - -_LZMA_UINT32_IS_ULONG - Define it if int is 16-bit on your compiler - and long is 32-bit. - -_LZMA_SYSTEM_SIZE_T - Define it if you want to use system's size_t. - You can use it to enable 64-bit sizes supporting - - - -C++ LZMA Encoder/Decoder -~~~~~~~~~~~~~~~~~~~~~~~~ -C++ LZMA code use COM-like interfaces. So if you want to use it, -you can study basics of COM/OLE. - -By default, LZMA Encoder contains all Match Finders. -But for compressing it's enough to have just one of them. -So for reducing size of compressing code you can define: - #define COMPRESS_MF_BT - #define COMPRESS_MF_BT4 -and it will use only bt4 match finder. - - ---- - -http://www.7-zip.org -http://www.7-zip.org/support.html +LZMA SDK 4.65 +------------- + +LZMA SDK provides the documentation, samples, header files, libraries, +and tools you need to develop applications that use LZMA compression. + +LZMA is default and general compression method of 7z format +in 7-Zip compression program (www.7-zip.org). LZMA provides high +compression ratio and very fast decompression. + +LZMA is an improved version of famous LZ77 compression algorithm. +It was improved in way of maximum increasing of compression ratio, +keeping high decompression speed and low memory requirements for +decompressing. + + + +LICENSE +------- + +LZMA SDK is written and placed in the public domain by Igor Pavlov. + + +LZMA SDK Contents +----------------- + +LZMA SDK includes: + + - ANSI-C/C++/C#/Java source code for LZMA compressing and decompressing + - Compiled file->file LZMA compressing/decompressing program for Windows system + + +UNIX/Linux version +------------------ +To compile C++ version of file->file LZMA encoding, go to directory +C++/7zip/Compress/LZMA_Alone +and call make to recompile it: + make -f makefile.gcc clean all + +In some UNIX/Linux versions you must compile LZMA with static libraries. +To compile with static libraries, you can use +LIB = -lm -static + + +Files +--------------------- +lzma.txt - LZMA SDK description (this file) +7zFormat.txt - 7z Format description +7zC.txt - 7z ANSI-C Decoder description +methods.txt - Compression method IDs for .7z +lzma.exe - Compiled file->file LZMA encoder/decoder for Windows +history.txt - history of the LZMA SDK + + +Source code structure +--------------------- + +C/ - C files + 7zCrc*.* - CRC code + Alloc.* - Memory allocation functions + Bra*.* - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code + LzFind.* - Match finder for LZ (LZMA) encoders + LzFindMt.* - Match finder for LZ (LZMA) encoders for multithreading encoding + LzHash.h - Additional file for LZ match finder + LzmaDec.* - LZMA decoding + LzmaEnc.* - LZMA encoding + LzmaLib.* - LZMA Library for DLL calling + Types.h - Basic types for another .c files + Threads.* - The code for multithreading. + + LzmaLib - LZMA Library (.DLL for Windows) + + LzmaUtil - LZMA Utility (file->file LZMA encoder/decoder). + + Archive - files related to archiving + 7z - 7z ANSI-C Decoder + +CPP/ -- CPP files + + Common - common files for C++ projects + Windows - common files for Windows related code + + 7zip - files related to 7-Zip Project + + Common - common files for 7-Zip + + Compress - files related to compression/decompression + + Copy - Copy coder + RangeCoder - Range Coder (special code of compression/decompression) + LZMA - LZMA compression/decompression on C++ + LZMA_Alone - file->file LZMA compression/decompression + Branch - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code + + Archive - files related to archiving + + Common - common files for archive handling + 7z - 7z C++ Encoder/Decoder + + Bundles - Modules that are bundles of other modules + + Alone7z - 7zr.exe: Standalone version of 7z.exe that supports only 7z/LZMA/BCJ/BCJ2 + Format7zR - 7zr.dll: Reduced version of 7za.dll: extracting/compressing to 7z/LZMA/BCJ/BCJ2 + Format7zExtractR - 7zxr.dll: Reduced version of 7zxa.dll: extracting from 7z/LZMA/BCJ/BCJ2. + + UI - User Interface files + + Client7z - Test application for 7za.dll, 7zr.dll, 7zxr.dll + Common - Common UI files + Console - Code for console archiver + + + +CS/ - C# files + 7zip + Common - some common files for 7-Zip + Compress - files related to compression/decompression + LZ - files related to LZ (Lempel-Ziv) compression algorithm + LZMA - LZMA compression/decompression + LzmaAlone - file->file LZMA compression/decompression + RangeCoder - Range Coder (special code of compression/decompression) + +Java/ - Java files + SevenZip + Compression - files related to compression/decompression + LZ - files related to LZ (Lempel-Ziv) compression algorithm + LZMA - LZMA compression/decompression + RangeCoder - Range Coder (special code of compression/decompression) + + +C/C++ source code of LZMA SDK is part of 7-Zip project. +7-Zip source code can be downloaded from 7-Zip's SourceForge page: + + http://sourceforge.net/projects/sevenzip/ + + + +LZMA features +------------- + - Variable dictionary size (up to 1 GB) + - Estimated compressing speed: about 2 MB/s on 2 GHz CPU + - Estimated decompressing speed: + - 20-30 MB/s on 2 GHz Core 2 or AMD Athlon 64 + - 1-2 MB/s on 200 MHz ARM, MIPS, PowerPC or other simple RISC + - Small memory requirements for decompressing (16 KB + DictionarySize) + - Small code size for decompressing: 5-8 KB + +LZMA decoder uses only integer operations and can be +implemented in any modern 32-bit CPU (or on 16-bit CPU with some conditions). + +Some critical operations that affect the speed of LZMA decompression: + 1) 32*16 bit integer multiply + 2) Misspredicted branches (penalty mostly depends from pipeline length) + 3) 32-bit shift and arithmetic operations + +The speed of LZMA decompressing mostly depends from CPU speed. +Memory speed has no big meaning. But if your CPU has small data cache, +overall weight of memory speed will slightly increase. + + +How To Use +---------- + +Using LZMA encoder/decoder executable +-------------------------------------- + +Usage: LZMA <e|d> inputFile outputFile [<switches>...] + + e: encode file + + d: decode file + + b: Benchmark. There are two tests: compressing and decompressing + with LZMA method. Benchmark shows rating in MIPS (million + instructions per second). Rating value is calculated from + measured speed and it is normalized with Intel's Core 2 results. + Also Benchmark checks possible hardware errors (RAM + errors in most cases). Benchmark uses these settings: + (-a1, -d21, -fb32, -mfbt4). You can change only -d parameter. + Also you can change the number of iterations. Example for 30 iterations: + LZMA b 30 + Default number of iterations is 10. + +<Switches> + + + -a{N}: set compression mode 0 = fast, 1 = normal + default: 1 (normal) + + d{N}: Sets Dictionary size - [0, 30], default: 23 (8MB) + The maximum value for dictionary size is 1 GB = 2^30 bytes. + Dictionary size is calculated as DictionarySize = 2^N bytes. + For decompressing file compressed by LZMA method with dictionary + size D = 2^N you need about D bytes of memory (RAM). + + -fb{N}: set number of fast bytes - [5, 273], default: 128 + Usually big number gives a little bit better compression ratio + and slower compression process. + + -lc{N}: set number of literal context bits - [0, 8], default: 3 + Sometimes lc=4 gives gain for big files. + + -lp{N}: set number of literal pos bits - [0, 4], default: 0 + lp switch is intended for periodical data when period is + equal 2^N. For example, for 32-bit (4 bytes) + periodical data you can use lp=2. Often it's better to set lc0, + if you change lp switch. + + -pb{N}: set number of pos bits - [0, 4], default: 2 + pb switch is intended for periodical data + when period is equal 2^N. + + -mf{MF_ID}: set Match Finder. Default: bt4. + Algorithms from hc* group doesn't provide good compression + ratio, but they often works pretty fast in combination with + fast mode (-a0). + + Memory requirements depend from dictionary size + (parameter "d" in table below). + + MF_ID Memory Description + + bt2 d * 9.5 + 4MB Binary Tree with 2 bytes hashing. + bt3 d * 11.5 + 4MB Binary Tree with 3 bytes hashing. + bt4 d * 11.5 + 4MB Binary Tree with 4 bytes hashing. + hc4 d * 7.5 + 4MB Hash Chain with 4 bytes hashing. + + -eos: write End Of Stream marker. By default LZMA doesn't write + eos marker, since LZMA decoder knows uncompressed size + stored in .lzma file header. + + -si: Read data from stdin (it will write End Of Stream marker). + -so: Write data to stdout + + +Examples: + +1) LZMA e file.bin file.lzma -d16 -lc0 + +compresses file.bin to file.lzma with 64 KB dictionary (2^16=64K) +and 0 literal context bits. -lc0 allows to reduce memory requirements +for decompression. + + +2) LZMA e file.bin file.lzma -lc0 -lp2 + +compresses file.bin to file.lzma with settings suitable +for 32-bit periodical data (for example, ARM or MIPS code). + +3) LZMA d file.lzma file.bin + +decompresses file.lzma to file.bin. + + +Compression ratio hints +----------------------- + +Recommendations +--------------- + +To increase the compression ratio for LZMA compressing it's desirable +to have aligned data (if it's possible) and also it's desirable to locate +data in such order, where code is grouped in one place and data is +grouped in other place (it's better than such mixing: code, data, code, +data, ...). + + +Filters +------- +You can increase the compression ratio for some data types, using +special filters before compressing. For example, it's possible to +increase the compression ratio on 5-10% for code for those CPU ISAs: +x86, IA-64, ARM, ARM-Thumb, PowerPC, SPARC. + +You can find C source code of such filters in C/Bra*.* files + +You can check the compression ratio gain of these filters with such +7-Zip commands (example for ARM code): +No filter: + 7z a a1.7z a.bin -m0=lzma + +With filter for little-endian ARM code: + 7z a a2.7z a.bin -m0=arm -m1=lzma + +It works in such manner: +Compressing = Filter_encoding + LZMA_encoding +Decompressing = LZMA_decoding + Filter_decoding + +Compressing and decompressing speed of such filters is very high, +so it will not increase decompressing time too much. +Moreover, it reduces decompression time for LZMA_decoding, +since compression ratio with filtering is higher. + +These filters convert CALL (calling procedure) instructions +from relative offsets to absolute addresses, so such data becomes more +compressible. + +For some ISAs (for example, for MIPS) it's impossible to get gain from such filter. + + +LZMA compressed file format +--------------------------- +Offset Size Description + 0 1 Special LZMA properties (lc,lp, pb in encoded form) + 1 4 Dictionary size (little endian) + 5 8 Uncompressed size (little endian). -1 means unknown size + 13 Compressed data + + +ANSI-C LZMA Decoder +~~~~~~~~~~~~~~~~~~~ + +Please note that interfaces for ANSI-C code were changed in LZMA SDK 4.58. +If you want to use old interfaces you can download previous version of LZMA SDK +from sourceforge.net site. + +To use ANSI-C LZMA Decoder you need the following files: +1) LzmaDec.h + LzmaDec.c + Types.h +LzmaUtil/LzmaUtil.c is example application that uses these files. + + +Memory requirements for LZMA decoding +------------------------------------- + +Stack usage of LZMA decoding function for local variables is not +larger than 200-400 bytes. + +LZMA Decoder uses dictionary buffer and internal state structure. +Internal state structure consumes + state_size = (4 + (1.5 << (lc + lp))) KB +by default (lc=3, lp=0), state_size = 16 KB. + + +How To decompress data +---------------------- + +LZMA Decoder (ANSI-C version) now supports 2 interfaces: +1) Single-call Decompressing +2) Multi-call State Decompressing (zlib-like interface) + +You must use external allocator: +Example: +void *SzAlloc(void *p, size_t size) { p = p; return malloc(size); } +void SzFree(void *p, void *address) { p = p; free(address); } +ISzAlloc alloc = { SzAlloc, SzFree }; + +You can use p = p; operator to disable compiler warnings. + + +Single-call Decompressing +------------------------- +When to use: RAM->RAM decompressing +Compile files: LzmaDec.h + LzmaDec.c + Types.h +Compile defines: no defines +Memory Requirements: + - Input buffer: compressed size + - Output buffer: uncompressed size + - LZMA Internal Structures: state_size (16 KB for default settings) + +Interface: + int LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, + const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, + ELzmaStatus *status, ISzAlloc *alloc); + In: + dest - output data + destLen - output data size + src - input data + srcLen - input data size + propData - LZMA properties (5 bytes) + propSize - size of propData buffer (5 bytes) + finishMode - It has meaning only if the decoding reaches output limit (*destLen). + LZMA_FINISH_ANY - Decode just destLen bytes. + LZMA_FINISH_END - Stream must be finished after (*destLen). + You can use LZMA_FINISH_END, when you know that + current output buffer covers last bytes of stream. + alloc - Memory allocator. + + Out: + destLen - processed output size + srcLen - processed input size + + Output: + SZ_OK + status: + LZMA_STATUS_FINISHED_WITH_MARK + LZMA_STATUS_NOT_FINISHED + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK + SZ_ERROR_DATA - Data error + SZ_ERROR_MEM - Memory allocation error + SZ_ERROR_UNSUPPORTED - Unsupported properties + SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src). + + If LZMA decoder sees end_marker before reaching output limit, it returns OK result, + and output value of destLen will be less than output buffer size limit. + + You can use multiple checks to test data integrity after full decompression: + 1) Check Result and "status" variable. + 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize. + 3) Check that output(srcLen) = compressedSize, if you know real compressedSize. + You must use correct finish mode in that case. */ + + +Multi-call State Decompressing (zlib-like interface) +---------------------------------------------------- + +When to use: file->file decompressing +Compile files: LzmaDec.h + LzmaDec.c + Types.h + +Memory Requirements: + - Buffer for input stream: any size (for example, 16 KB) + - Buffer for output stream: any size (for example, 16 KB) + - LZMA Internal Structures: state_size (16 KB for default settings) + - LZMA dictionary (dictionary size is encoded in LZMA properties header) + +1) read LZMA properties (5 bytes) and uncompressed size (8 bytes, little-endian) to header: + unsigned char header[LZMA_PROPS_SIZE + 8]; + ReadFile(inFile, header, sizeof(header) + +2) Allocate CLzmaDec structures (state + dictionary) using LZMA properties + + CLzmaDec state; + LzmaDec_Constr(&state); + res = LzmaDec_Allocate(&state, header, LZMA_PROPS_SIZE, &g_Alloc); + if (res != SZ_OK) + return res; + +3) Init LzmaDec structure before any new LZMA stream. And call LzmaDec_DecodeToBuf in loop + + LzmaDec_Init(&state); + for (;;) + { + ... + int res = LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, + const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode); + ... + } + + +4) Free all allocated structures + LzmaDec_Free(&state, &g_Alloc); + +For full code example, look at C/LzmaUtil/LzmaUtil.c code. + + +How To compress data +-------------------- + +Compile files: LzmaEnc.h + LzmaEnc.c + Types.h + +LzFind.c + LzFind.h + LzFindMt.c + LzFindMt.h + LzHash.h + +Memory Requirements: + - (dictSize * 11.5 + 6 MB) + state_size + +Lzma Encoder can use two memory allocators: +1) alloc - for small arrays. +2) allocBig - for big arrays. + +For example, you can use Large RAM Pages (2 MB) in allocBig allocator for +better compression speed. Note that Windows has bad implementation for +Large RAM Pages. +It's OK to use same allocator for alloc and allocBig. + + +Single-call Compression with callbacks +-------------------------------------- + +Check C/LzmaUtil/LzmaUtil.c as example, + +When to use: file->file decompressing + +1) you must implement callback structures for interfaces: +ISeqInStream +ISeqOutStream +ICompressProgress +ISzAlloc + +static void *SzAlloc(void *p, size_t size) { p = p; return MyAlloc(size); } +static void SzFree(void *p, void *address) { p = p; MyFree(address); } +static ISzAlloc g_Alloc = { SzAlloc, SzFree }; + + CFileSeqInStream inStream; + CFileSeqOutStream outStream; + + inStream.funcTable.Read = MyRead; + inStream.file = inFile; + outStream.funcTable.Write = MyWrite; + outStream.file = outFile; + + +2) Create CLzmaEncHandle object; + + CLzmaEncHandle enc; + + enc = LzmaEnc_Create(&g_Alloc); + if (enc == 0) + return SZ_ERROR_MEM; + + +3) initialize CLzmaEncProps properties; + + LzmaEncProps_Init(&props); + + Then you can change some properties in that structure. + +4) Send LZMA properties to LZMA Encoder + + res = LzmaEnc_SetProps(enc, &props); + +5) Write encoded properties to header + + Byte header[LZMA_PROPS_SIZE + 8]; + size_t headerSize = LZMA_PROPS_SIZE; + UInt64 fileSize; + int i; + + res = LzmaEnc_WriteProperties(enc, header, &headerSize); + fileSize = MyGetFileLength(inFile); + for (i = 0; i < 8; i++) + header[headerSize++] = (Byte)(fileSize >> (8 * i)); + MyWriteFileAndCheck(outFile, header, headerSize) + +6) Call encoding function: + res = LzmaEnc_Encode(enc, &outStream.funcTable, &inStream.funcTable, + NULL, &g_Alloc, &g_Alloc); + +7) Destroy LZMA Encoder Object + LzmaEnc_Destroy(enc, &g_Alloc, &g_Alloc); + + +If callback function return some error code, LzmaEnc_Encode also returns that code. + + +Single-call RAM->RAM Compression +-------------------------------- + +Single-call RAM->RAM Compression is similar to Compression with callbacks, +but you provide pointers to buffers instead of pointers to stream callbacks: + +HRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, + CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, + ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); + +Return code: + SZ_OK - OK + SZ_ERROR_MEM - Memory allocation error + SZ_ERROR_PARAM - Incorrect paramater + SZ_ERROR_OUTPUT_EOF - output buffer overflow + SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) + + + +LZMA Defines +------------ + +_LZMA_SIZE_OPT - Enable some optimizations in LZMA Decoder to get smaller executable code. + +_LZMA_PROB32 - It can increase the speed on some 32-bit CPUs, but memory usage for + some structures will be doubled in that case. + +_LZMA_UINT32_IS_ULONG - Define it if int is 16-bit on your compiler and long is 32-bit. + +_LZMA_NO_SYSTEM_SIZE_T - Define it if you don't want to use size_t type. + + +C++ LZMA Encoder/Decoder +~~~~~~~~~~~~~~~~~~~~~~~~ +C++ LZMA code use COM-like interfaces. So if you want to use it, +you can study basics of COM/OLE. +C++ LZMA code is just wrapper over ANSI-C code. + + +C++ Notes +~~~~~~~~~~~~~~~~~~~~~~~~ +If you use some C++ code folders in 7-Zip (for example, C++ code for .7z handling), +you must check that you correctly work with "new" operator. +7-Zip can be compiled with MSVC 6.0 that doesn't throw "exception" from "new" operator. +So 7-Zip uses "CPP\Common\NewHandler.cpp" that redefines "new" operator: +operator new(size_t size) +{ + void *p = ::malloc(size); + if (p == 0) + throw CNewException(); + return p; +} +If you use MSCV that throws exception for "new" operator, you can compile without +"NewHandler.cpp". So standard exception will be used. Actually some code of +7-Zip catches any exception in internal code and converts it to HRESULT code. +So you don't need to catch CNewException, if you call COM interfaces of 7-Zip. + +--- + +http://www.7-zip.org +http://www.7-zip.org/sdk.html +http://www.7-zip.org/support.html