We only want to call do_board_detect() if CONFIG_TI_I2C_BOARD_DETECT is set. Same as done for am64.

This makes it possible to add a custom am65 based board design to U-Boot that does not use this board detection mechanism.

Signed-off-by: Christian Gmeiner christian.gmeiner@gmail.com --- arch/arm/mach-k3/am6_init.c | 3 ++- board/ti/am65x/evm.c | 26 +++++++++++++++----------- 2 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c index ffb7aaded2..8a6b1de764 100644 --- a/arch/arm/mach-k3/am6_init.c +++ b/arch/arm/mach-k3/am6_init.c @@ -251,7 +251,8 @@ void board_init_f(ulong dummy) k3_sysfw_print_ver();

/* Perform EEPROM-based board detection */ - do_board_detect(); + if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT)) + do_board_detect();

#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0) ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs), diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c index fbe33cbea5..7182a8cad1 100644 --- a/board/ti/am65x/evm.c +++ b/board/ti/am65x/evm.c @@ -129,6 +129,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) } #endif

+#ifdef CONFIG_TI_I2C_BOARD_DETECT int do_board_detect(void) { int ret; @@ -353,23 +354,26 @@ static int probe_daughtercards(void)

return 0; } +#endif

int board_late_init(void) { - struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA; + if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT)) { + struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;

- setup_board_eeprom_env(); + setup_board_eeprom_env();

- /* - * The first MAC address for ethernet a.k.a. ethernet0 comes from - * efuse populated via the am654 gigabit eth switch subsystem driver. - * All the other ones are populated via EEPROM, hence continue with - * an index of 1. - */ - board_ti_am6_set_ethaddr(1, ep->mac_addr_cnt); + /* + * The first MAC address for ethernet a.k.a. ethernet0 comes from + * efuse populated via the am654 gigabit eth switch subsystem driver. + * All the other ones are populated via EEPROM, hence continue with + * an index of 1. + */ + board_ti_am6_set_ethaddr(1, ep->mac_addr_cnt);

- /* Check for and probe any plugged-in daughtercards */ - probe_daughtercards(); + /* Check for and probe any plugged-in daughtercards */ + probe_daughtercards(); + }

return 0; }