This patch adds fdt (flattened device tree) support to all remaining AMCC eval boards. Most newer boards already support device tree. With this patch, all AMCC boards now enable device tree passing from U-Boot to Linux arch/powerpc kernels.

Signed-off-by: Stefan Roese sr@denx.de --- include/configs/bamboo.h | 6 ++++++ include/configs/bubinga.h | 5 +++++ include/configs/ebony.h | 6 ++++++ include/configs/katmai.h | 2 +- include/configs/luan.h | 5 +++++ include/configs/ocotea.h | 5 +++++ include/configs/taihu.h | 5 +++++ include/configs/taishan.h | 5 +++++ include/configs/walnut.h | 6 ++++++ include/configs/yosemite.h | 13 ++++--------- include/configs/yucca.h | 4 ++++ 11 files changed, 52 insertions(+), 10 deletions(-)

diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 4ea040b..2f0df8a 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -291,6 +291,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */

+#define CONFIG_HAS_ETH0 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ #define CONFIG_PHY1_ADDR 1 @@ -426,4 +427,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 784e7c0..cbd74a0 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -128,6 +128,7 @@

#define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_PHY1_ADDR 2 /* EMAC1 PHY address */ #define CONFIG_NET_MULTI 1 @@ -435,4 +436,8 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif

+/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/ebony.h b/include/configs/ebony.h index 88fd7ca..ba68fd4 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -201,6 +201,7 @@

#define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 8 /* PHY address */ +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_PHY1_ADDR 9 /* EMAC1 PHY address */ #define CONFIG_NET_MULTI 1 @@ -306,4 +307,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index d2f6b10..cce883f 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -79,7 +79,7 @@ #define CFG_ACE_BASE 0xfe000000 /* Xilinx ACE controller - Compact Flash */

#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_LEN + 1) +#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_BASE + 1) #define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */

/*----------------------------------------------------------------------- diff --git a/include/configs/luan.h b/include/configs/luan.h index af237d9..37151d3 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -195,6 +195,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */

+#define CONFIG_HAS_ETH0 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 #define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ @@ -306,4 +307,8 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif

+/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index 5a6eb4a..be2b3ec 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -330,4 +330,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/taihu.h b/include/configs/taihu.h index 7db9736..8a1ff1a 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -114,6 +114,7 @@

#define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0x14 /* PHY address */ +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */ #define CONFIG_NET_MULTI 1 @@ -433,4 +434,8 @@ unsigned char spi_read(void); #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif

+/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 851a7ad..1879d38 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -331,4 +331,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/walnut.h b/include/configs/walnut.h index f6e99ac..adc420b 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -92,6 +92,7 @@ #define CONFIG_PHY_ADDR 1 /* PHY address */

#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ +#define CONFIG_HAS_ETH0 1

#define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* needed for NetConsole */ @@ -346,4 +347,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 3bd115a..f22e798 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -139,15 +139,6 @@ #define CFG_KBYTES_SDRAM (128 * 1024) /* 128MB */ #define CFG_SDRAM_BANKS (2)

- -/*----------------------------------------------------------------------- - * Device tree support (Linux-2.6.26+) - *----------------------------------------------------------------------*/ - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ @@ -392,4 +383,8 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif

+/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 1e3571e..6f9d3e3 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -541,4 +541,8 @@

/*---------------------------------------------------------------------------*/

+/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */