Hi all,

I've ported the code from da850 evm to a AM1808-based custom board. The original u-boot version is u-boot-2011.12-rc1. The board has a LCD 240x320. Its controller is a ILI9340 and must be initialized via SPI1 interface, chip select #2, 9-bits per word. Please note that I do not need to enable the da850's embedded lcd controller (the kernel will do that), I just have to write a sequence of 9-bit commands out to the SPI. Is u-boot the right place where such a initialization has to be done ? Is there anybody out there who faced a similar problem and eventually can suggest me a reference code within u-boot ?

Thanks,

Gabriele