[PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes
When looking for an alias with the highest id skip aliases for nodes that are disabled.
Signed-off-by: Tim Harvey tharvey@gateworks.com --- lib/fdtdec.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 864589193b..d47195525a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -546,6 +546,8 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base) if (*prop != '/' || prop[len - 1] || strncmp(name, base, base_len)) continue; + if (!fdtdec_get_is_enabled(blob, fdt_path_offset(blob, prop))) + continue;
val = trailing_strtol(name); if (val > max) {
Hi Tim,
On Fri, 16 Apr 2021 at 14:30, Tim Harvey tharvey@gateworks.com wrote:
When looking for an alias with the highest id skip aliases for nodes that are disabled.
Signed-off-by: Tim Harvey tharvey@gateworks.com
lib/fdtdec.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 864589193b..d47195525a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -546,6 +546,8 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base) if (*prop != '/' || prop[len - 1] || strncmp(name, base, base_len)) continue;
if (!fdtdec_get_is_enabled(blob, fdt_path_offset(blob, prop)))continue;
We really can't do this here. It is quite an expensive operation to locate the node for a path.
Why is this needed? It seems odd to have an alias pointing to a disabled device.
val = trailing_strtol(name); if (val > max) {-- 2.17.1
Regards, Simon
On Thu, Apr 29, 2021 at 9:10 AM Simon Glass sjg@chromium.org wrote:
Hi Tim,
On Fri, 16 Apr 2021 at 14:30, Tim Harvey tharvey@gateworks.com wrote:
When looking for an alias with the highest id skip aliases for nodes that are disabled.
Signed-off-by: Tim Harvey tharvey@gateworks.com
lib/fdtdec.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 864589193b..d47195525a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -546,6 +546,8 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base) if (*prop != '/' || prop[len - 1] || strncmp(name, base, base_len)) continue;
if (!fdtdec_get_is_enabled(blob, fdt_path_offset(blob, prop)))continue;We really can't do this here. It is quite an expensive operation to locate the node for a path.
Why is this needed? It seems odd to have an alias pointing to a disabled device.
Simon,
The issue I ran into here was with an imx6 based board that does not use the FEC ethernet on the SoC. In this case imx6qdl.dtsi delcares an alias 'thernet0 = &fec' yet the fec node is not enabled. However because fdtdec_get_alias_highest_id does not skip this alias to a disabled device any enumerated ethernet devices get an index of 1 instead of 0 which is incorrect and causes the mac addresses to be misaligned.
In general it is just wrong to reserve id's for disabled devices.
Tim
On Thu, Apr 29, 2021 at 9:48 AM Tim Harvey tharvey@gateworks.com wrote:
On Thu, Apr 29, 2021 at 9:10 AM Simon Glass sjg@chromium.org wrote:
Hi Tim,
On Fri, 16 Apr 2021 at 14:30, Tim Harvey tharvey@gateworks.com wrote:
When looking for an alias with the highest id skip aliases for nodes that are disabled.
Signed-off-by: Tim Harvey tharvey@gateworks.com
lib/fdtdec.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 864589193b..d47195525a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -546,6 +546,8 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base) if (*prop != '/' || prop[len - 1] || strncmp(name, base, base_len)) continue;
if (!fdtdec_get_is_enabled(blob, fdt_path_offset(blob, prop)))continue;We really can't do this here. It is quite an expensive operation to locate the node for a path.
Why is this needed? It seems odd to have an alias pointing to a disabled device.
Simon,
The issue I ran into here was with an imx6 based board that does not use the FEC ethernet on the SoC. In this case imx6qdl.dtsi delcares an alias 'thernet0 = &fec' yet the fec node is not enabled. However because fdtdec_get_alias_highest_id does not skip this alias to a disabled device any enumerated ethernet devices get an index of 1 instead of 0 which is incorrect and causes the mac addresses to be misaligned.
In general it is just wrong to reserve id's for disabled devices.
Simon,
Do you have any additional feedback on this? It has not been picked up yet and does cause issues on IMX boards using dm that do not use the internal SoC's fec ethernet.
Perhaps there is a better way to resolve this?
Best regards,
Tim
On 6/11/21 12:32 PM, Tim Harvey wrote:
On Thu, Apr 29, 2021 at 9:48 AM Tim Harvey tharvey@gateworks.com wrote:
On Thu, Apr 29, 2021 at 9:10 AM Simon Glass sjg@chromium.org wrote:
Hi Tim,
On Fri, 16 Apr 2021 at 14:30, Tim Harvey tharvey@gateworks.com wrote:
When looking for an alias with the highest id skip aliases for nodes that are disabled.
Signed-off-by: Tim Harvey tharvey@gateworks.com
lib/fdtdec.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 864589193b..d47195525a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -546,6 +546,8 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base) if (*prop != '/' || prop[len - 1] || strncmp(name, base, base_len)) continue;
if (!fdtdec_get_is_enabled(blob, fdt_path_offset(blob, prop)))continue;We really can't do this here. It is quite an expensive operation to locate the node for a path.
Why is this needed? It seems odd to have an alias pointing to a disabled device.
Simon,
The issue I ran into here was with an imx6 based board that does not use the FEC ethernet on the SoC. In this case imx6qdl.dtsi delcares an alias 'thernet0 = &fec' yet the fec node is not enabled. However because fdtdec_get_alias_highest_id does not skip this alias to a disabled device any enumerated ethernet devices get an index of 1 instead of 0 which is incorrect and causes the mac addresses to be misaligned.
Is this due getting mac address from the OTP? As I understand it, the OTP mac addresses are for fec0/fec1, and not for whatever ethernet0 happens to be.
--Sean
In general it is just wrong to reserve id's for disabled devices.
Simon,
Do you have any additional feedback on this? It has not been picked up yet and does cause issues on IMX boards using dm that do not use the internal SoC's fec ethernet.
Perhaps there is a better way to resolve this?
Best regards,
Tim
On Fri, Jun 11, 2021 at 10:09 AM Sean Anderson sean.anderson@seco.com wrote:
On 6/11/21 12:32 PM, Tim Harvey wrote:
On Thu, Apr 29, 2021 at 9:48 AM Tim Harvey tharvey@gateworks.com wrote:
On Thu, Apr 29, 2021 at 9:10 AM Simon Glass sjg@chromium.org wrote:
Hi Tim,
On Fri, 16 Apr 2021 at 14:30, Tim Harvey tharvey@gateworks.com wrote:
When looking for an alias with the highest id skip aliases for nodes that are disabled.
Signed-off-by: Tim Harvey tharvey@gateworks.com
lib/fdtdec.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 864589193b..d47195525a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -546,6 +546,8 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base) if (*prop != '/' || prop[len - 1] || strncmp(name, base, base_len)) continue;
if (!fdtdec_get_is_enabled(blob, fdt_path_offset(blob, prop)))continue;We really can't do this here. It is quite an expensive operation to locate the node for a path.
Why is this needed? It seems odd to have an alias pointing to a disabled device.
Simon,
The issue I ran into here was with an imx6 based board that does not use the FEC ethernet on the SoC. In this case imx6qdl.dtsi delcares an alias 'thernet0 = &fec' yet the fec node is not enabled. However because fdtdec_get_alias_highest_id does not skip this alias to a disabled device any enumerated ethernet devices get an index of 1 instead of 0 which is incorrect and causes the mac addresses to be misaligned.
Is this due getting mac address from the OTP? As I understand it, the OTP mac addresses are for fec0/fec1, and not for whatever ethernet0 happens to be.
Sean,
No, the issue is that U-Boot thinks there is an fec device simply because an alias points to it even though the fec node pointed to is disabled so when U-Boot finds an ethernet device that is enumerated at runtime (think pcie or usb based mac) those start at index 1 instead of index 0 and end up wanting to be assigned mac's from eth1addr instead of ethaddr.
Tim
On 6/11/21 1:16 PM, Tim Harvey wrote:
On Fri, Jun 11, 2021 at 10:09 AM Sean Anderson sean.anderson@seco.com wrote:
On 6/11/21 12:32 PM, Tim Harvey wrote:
On Thu, Apr 29, 2021 at 9:48 AM Tim Harvey tharvey@gateworks.com wrote:
On Thu, Apr 29, 2021 at 9:10 AM Simon Glass sjg@chromium.org wrote:
Hi Tim,
On Fri, 16 Apr 2021 at 14:30, Tim Harvey tharvey@gateworks.com wrote:
When looking for an alias with the highest id skip aliases for nodes that are disabled.
Signed-off-by: Tim Harvey tharvey@gateworks.com
lib/fdtdec.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 864589193b..d47195525a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -546,6 +546,8 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base) if (*prop != '/' || prop[len - 1] || strncmp(name, base, base_len)) continue;
if (!fdtdec_get_is_enabled(blob, fdt_path_offset(blob, prop)))continue;We really can't do this here. It is quite an expensive operation to locate the node for a path.
Why is this needed? It seems odd to have an alias pointing to a disabled device.
Simon,
The issue I ran into here was with an imx6 based board that does not use the FEC ethernet on the SoC. In this case imx6qdl.dtsi delcares an alias 'thernet0 = &fec' yet the fec node is not enabled. However because fdtdec_get_alias_highest_id does not skip this alias to a disabled device any enumerated ethernet devices get an index of 1 instead of 0 which is incorrect and causes the mac addresses to be misaligned.
Is this due getting mac address from the OTP? As I understand it, the OTP mac addresses are for fec0/fec1, and not for whatever ethernet0 happens to be.
Sean,
No, the issue is that U-Boot thinks there is an fec device simply because an alias points to it even though the fec node pointed to is disabled so when U-Boot finds an ethernet device that is enumerated at runtime (think pcie or usb based mac) those start at index 1 instead of index 0 and end up wanting to be assigned mac's from eth1addr instead of ethaddr.
Ok, and this behavior was different in the past? E.g. it used to be that these interfaces were assigned to ethernet0, and so their mac address was stored in ethaddr. And then something changed and now they are ethernet1 and are trying to get the incorrect mac address?
Do you know whether it would be possible to remove the alias at the same time you mark the fec as disabled?
--Sean
On Fri, Jun 11, 2021 at 10:23 AM Sean Anderson sean.anderson@seco.com wrote:
On 6/11/21 1:16 PM, Tim Harvey wrote:
On Fri, Jun 11, 2021 at 10:09 AM Sean Anderson sean.anderson@seco.com wrote:
On 6/11/21 12:32 PM, Tim Harvey wrote:
On Thu, Apr 29, 2021 at 9:48 AM Tim Harvey tharvey@gateworks.com wrote:
On Thu, Apr 29, 2021 at 9:10 AM Simon Glass sjg@chromium.org wrote:
Hi Tim,
On Fri, 16 Apr 2021 at 14:30, Tim Harvey tharvey@gateworks.com wrote: > > When looking for an alias with the highest id skip aliases for nodes > that are disabled. > > Signed-off-by: Tim Harvey tharvey@gateworks.com > --- > lib/fdtdec.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/lib/fdtdec.c b/lib/fdtdec.c > index 864589193b..d47195525a 100644 > --- a/lib/fdtdec.c > +++ b/lib/fdtdec.c > @@ -546,6 +546,8 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base) > if (*prop != '/' || prop[len - 1] || > strncmp(name, base, base_len)) > continue; > + if (!fdtdec_get_is_enabled(blob, fdt_path_offset(blob, prop))) > + continue;
We really can't do this here. It is quite an expensive operation to locate the node for a path.
Why is this needed? It seems odd to have an alias pointing to a disabled device.
Simon,
The issue I ran into here was with an imx6 based board that does not use the FEC ethernet on the SoC. In this case imx6qdl.dtsi delcares an alias 'thernet0 = &fec' yet the fec node is not enabled. However because fdtdec_get_alias_highest_id does not skip this alias to a disabled device any enumerated ethernet devices get an index of 1 instead of 0 which is incorrect and causes the mac addresses to be misaligned.
Is this due getting mac address from the OTP? As I understand it, the OTP mac addresses are for fec0/fec1, and not for whatever ethernet0 happens to be.
Sean,
No, the issue is that U-Boot thinks there is an fec device simply because an alias points to it even though the fec node pointed to is disabled so when U-Boot finds an ethernet device that is enumerated at runtime (think pcie or usb based mac) those start at index 1 instead of index 0 and end up wanting to be assigned mac's from eth1addr instead of ethaddr.
Ok, and this behavior was different in the past? E.g. it used to be that these interfaces were assigned to ethernet0, and so their mac address was stored in ethaddr. And then something changed and now they are ethernet1 and are trying to get the incorrect mac address?
Sean,
Yes, in the past before using driver-model this did not occur as everything was statically declared in board files.
Do you know whether it would be possible to remove the alias at the same time you mark the fec as disabled?
The dt's are all merged together. The base SoC dt declares the alias to internal fec ethernet device and that alias can be overridden by any dts that includes that base soc dt but if you have a gbe that is discovered and not declared in dt there will be no alias to override it. When I submitted this patch I looked at what the kernel code did and noticed it did not reserve indexes/slots for disabled devices so I figure that's what the bootloader should do also.
Tim
Hi Tim,
On Fri, 11 Jun 2021 at 11:30, Tim Harvey tharvey@gateworks.com wrote:
On Fri, Jun 11, 2021 at 10:23 AM Sean Anderson sean.anderson@seco.com wrote:
On 6/11/21 1:16 PM, Tim Harvey wrote:
On Fri, Jun 11, 2021 at 10:09 AM Sean Anderson sean.anderson@seco.com wrote:
On 6/11/21 12:32 PM, Tim Harvey wrote:
On Thu, Apr 29, 2021 at 9:48 AM Tim Harvey tharvey@gateworks.com wrote:
On Thu, Apr 29, 2021 at 9:10 AM Simon Glass sjg@chromium.org wrote: > > Hi Tim, > > On Fri, 16 Apr 2021 at 14:30, Tim Harvey tharvey@gateworks.com wrote: >> >> When looking for an alias with the highest id skip aliases for nodes >> that are disabled. >> >> Signed-off-by: Tim Harvey tharvey@gateworks.com >> --- >> lib/fdtdec.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/lib/fdtdec.c b/lib/fdtdec.c >> index 864589193b..d47195525a 100644 >> --- a/lib/fdtdec.c >> +++ b/lib/fdtdec.c >> @@ -546,6 +546,8 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base) >> if (*prop != '/' || prop[len - 1] || >> strncmp(name, base, base_len)) >> continue; >> + if (!fdtdec_get_is_enabled(blob, fdt_path_offset(blob, prop))) >> + continue; > > We really can't do this here. It is quite an expensive operation to > locate the node for a path. > > Why is this needed? It seems odd to have an alias pointing to a disabled device. >
Simon,
The issue I ran into here was with an imx6 based board that does not use the FEC ethernet on the SoC. In this case imx6qdl.dtsi delcares an alias 'thernet0 = &fec' yet the fec node is not enabled. However because fdtdec_get_alias_highest_id does not skip this alias to a disabled device any enumerated ethernet devices get an index of 1 instead of 0 which is incorrect and causes the mac addresses to be misaligned.
Is this due getting mac address from the OTP? As I understand it, the OTP mac addresses are for fec0/fec1, and not for whatever ethernet0 happens to be.
Sean,
No, the issue is that U-Boot thinks there is an fec device simply because an alias points to it even though the fec node pointed to is disabled so when U-Boot finds an ethernet device that is enumerated at runtime (think pcie or usb based mac) those start at index 1 instead of index 0 and end up wanting to be assigned mac's from eth1addr instead of ethaddr.
Ok, and this behavior was different in the past? E.g. it used to be that these interfaces were assigned to ethernet0, and so their mac address was stored in ethaddr. And then something changed and now they are ethernet1 and are trying to get the incorrect mac address?
Sean,
Yes, in the past before using driver-model this did not occur as everything was statically declared in board files.
Do you know whether it would be possible to remove the alias at the same time you mark the fec as disabled?
The dt's are all merged together. The base SoC dt declares the alias to internal fec ethernet device and that alias can be overridden by any dts that includes that base soc dt but if you have a gbe that is discovered and not declared in dt there will be no alias to override it. When I submitted this patch I looked at what the kernel code did and noticed it did not reserve indexes/slots for disabled devices so I figure that's what the bootloader should do also.
Can you try enabled OF_LIVE? It is possible that it might be different there. Even if not, it should be a cheap fix.
As mentioned the problem with your patch is that the path operation is very expensive. I'm fine with it if you want to add it as a new CONFIG option, so it doesn't affect all platforms. But if you do that, please do update test-fdt.c for the sandbox tests.
Regards, Simon
participants (3)
-
Sean Anderson -
Simon Glass -
Tim Harvey