-----Original Message----- From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Alison Wang Sent: Thursday, April 23, 2020 8:08 PM To: u-boot@lists.denx.de; Priyanka Jain priyanka.jain@nxp.com; Jagdish Gediya jagdish.gediya@nxp.com Cc: Shengzhou Liu shengzhou.liu@nxp.com Subject: [PATCH v2] configs: ls1021a: Append CMA configuration to bootargs

The default reserved memory for CMA is high memory. If LPAE is enabled, highmem pages are non-remapped and can not be used with dma_alloc_coherent. Reserving low memory for CMA is needed for LS1021A. This patch appends the related CMA configuration to bootargs.

Signed-off-by: Shengzhou Liu Shengzhou.Liu@nxp.com Signed-off-by: Alison Wang alison.wang@nxp.com

---

Change in v2:

• Update the comment.

include/configs/ls1021atwr.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index a6289850ca..45ce460dca 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -297,7 +297,8 @@

#ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \

• "bootargs=root=/dev/ram0 rw console=ttyLP0,115200

$othbootargs\0" \

• "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 " \

• "cma=64M@0x0-0xb0000000\0" \
  

  "initrd_high=0xffffffff\0" \ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x65000000\0" \

@@ -353,7 +354,8 @@ "$kernel_size && bootm $load_addr#$board\0" #else #define CONFIG_EXTRA_ENV_SETTINGS \

• "bootargs=root=/dev/ram0 rw console=ttyS0,115200 $othbootargs\0"

\

• "bootargs=root=/dev/ram0 rw console=ttyS0,115200 " \

• "cma=64M@0x0-0xb0000000\0" \
  

  "initrd_high=0xffffffff\0" \ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x61000000\0" \

-- 2.17.1

Reviewed-by: Priyanka Jain priyanka.jain@nxp.com