Hello, I've ported the U-Boot to my own board. I am using a MPC866. I compiled with the option of -DDEBUG, so I can see the debug messages. I try to load an Linux kernel image, but after checking the image and uncompresses it, the following message appears: "Transferring control to Linux (at address 0x00000000)". So I think U-Boot has already finished, hasn't it? My problem is that after this message, the kernel hangs. Moreover, it is supposed that the Linux kernel is uncompressed in the address 0x00000000 (at least for PPC), but I do not see it there. I am not sure if the problem is in my kernel image or in the U-Boot and where. Can anybody help me?

Thanks,

Raúl Moreno ***********Internet Email Confidentiality Footer************* This email and any files transmitted with it are confidential and intended solely for the use of the organization or individual to whom they are addressed. It is expressly forbidden to retransmit or copy email and/or this attached files without our permission . If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer does not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of my firm shall be understood as neither given nor endorsed by it.