Current fsl_esdhc driver had support DM_MMC with BLK enabled. Since BLK will be hard requirement of DM_MMC, let's do this now in fsl_esdhc driver. Don't keep BLK conditioanl compiling.

Signed-off-by: Yangbo Lu yangbo.lu@nxp.com --- Changes for v2: - None. Changes for v3: - None. --- drivers/mmc/fsl_esdhc.c | 35 +---------------------------------- 1 file changed, 1 insertion(+), 34 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 0731847..ff5565c 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -23,10 +23,6 @@ #include <asm/io.h> #include <dm.h>

-#if !CONFIG_IS_ENABLED(BLK) -#include "mmc_private.h" -#endif - DECLARE_GLOBAL_DATA_PTR;

#define SDHCI_IRQ_EN_BITS (IRQSTATEN_CC | IRQSTATEN_TC | \ @@ -35,7 +31,6 @@ DECLARE_GLOBAL_DATA_PTR; IRQSTATEN_CIE | IRQSTATEN_DTOE | IRQSTATEN_DCE | \ IRQSTATEN_DEBE | IRQSTATEN_BRR | IRQSTATEN_BWR | \ IRQSTATEN_DINT) -#define ESDHC_DRIVER_STAGE_VALUE 0xffffffff

struct fsl_esdhc { uint dsaddr; /* SDMA system address register */ @@ -98,7 +93,7 @@ struct fsl_esdhc_priv { struct clk per_clk; unsigned int clock; unsigned int bus_width; -#if !CONFIG_IS_ENABLED(BLK) +#if !CONFIG_IS_ENABLED(DM_MMC) struct mmc *mmc; #endif struct udevice *dev; @@ -961,9 +956,6 @@ static int fsl_esdhc_probe(struct udevice *dev) fdt_addr_t addr; unsigned int val; struct mmc *mmc; -#if !CONFIG_IS_ENABLED(BLK) - struct blk_desc *bdesc; -#endif int ret;

addr = dev_read_addr(dev); @@ -1027,32 +1019,12 @@ static int fsl_esdhc_probe(struct udevice *dev) mmc = &plat->mmc; mmc->cfg = &plat->cfg; mmc->dev = dev; -#if !CONFIG_IS_ENABLED(BLK) - mmc->priv = priv; - - /* Setup dsr related values */ - mmc->dsr_imp = 0; - mmc->dsr = ESDHC_DRIVER_STAGE_VALUE; - /* Setup the universal parts of the block interface just once */ - bdesc = mmc_get_blk_desc(mmc); - bdesc->if_type = IF_TYPE_MMC; - bdesc->removable = 1; - bdesc->devnum = mmc_get_next_devnum(); - bdesc->block_read = mmc_bread; - bdesc->block_write = mmc_bwrite; - bdesc->block_erase = mmc_berase; - - /* setup initial part type */ - bdesc->part_type = mmc->cfg->part_type; - mmc_list_add(mmc); -#endif

upriv->mmc = mmc;

return esdhc_init_common(priv, mmc); }

-#if CONFIG_IS_ENABLED(DM_MMC) static int fsl_esdhc_get_cd(struct udevice *dev) { struct fsl_esdhc_priv *priv = dev_get_priv(dev); @@ -1082,30 +1054,25 @@ static const struct dm_mmc_ops fsl_esdhc_ops = { .send_cmd = fsl_esdhc_send_cmd, .set_ios = fsl_esdhc_set_ios, }; -#endif

static const struct udevice_id fsl_esdhc_ids[] = { { .compatible = "fsl,esdhc", }, { /* sentinel */ } };

-#if CONFIG_IS_ENABLED(BLK) static int fsl_esdhc_bind(struct udevice *dev) { struct fsl_esdhc_plat *plat = dev_get_platdata(dev);

return mmc_bind(dev, &plat->mmc, &plat->cfg); } -#endif

U_BOOT_DRIVER(fsl_esdhc) = { .name = "fsl-esdhc-mmc", .id = UCLASS_MMC, .of_match = fsl_esdhc_ids, .ops = &fsl_esdhc_ops, -#if CONFIG_IS_ENABLED(BLK) .bind = fsl_esdhc_bind, -#endif .probe = fsl_esdhc_probe, .platdata_auto_alloc_size = sizeof(struct fsl_esdhc_plat), .priv_auto_alloc_size = sizeof(struct fsl_esdhc_priv),